Owners of the popular budget TWS-Headsets from the Chinese giant often encounter the non-obvious logic of the device, especially when it comes to power management. The question of how to turn off the headphones Xiaomi Airdots 2, arises from users not by chance, because the body of the “ears” there are no physical buttons or switches. This design decision is dictated by the desire for minimalism and protection from moisture, but it creates certain difficulties for those who are used to classical electronics.
Understanding the energy-saving system in this model is critical to extending battery life. Mishandling the charging case or ignoring the indicators can cause the device to discharge at the most inopportune moment or, conversely, go into deep sleep, no longer responding to commands. In this article, we will discuss in detail all the nuances of turning off, rebooting and resetting your Bluetooth headphones.
It should be noted that the standard shutdown procedure in Xiaomi Airdots 2 is as automated as possible and does not require complex manipulation from the user. However, there are situations where automation fails and forced intervention is required. We will consider both standard scenarios and methods for solving problems when the headset ceases to respond correctly to smartphone commands.
Principle of automatic switching off and charging
The main mechanism that should interest the owner is the automatic shutdown when placed in the case. When you remove the right or left earphone in the charging compartment and close the lid (or just make contact with the pins), the device goes into charging mode, at which point the Bluetooth connection breaks, and the LED indicator on the case "ear" lights up red, signaling the arrival of current.
If you just leave the headphones out of the case, they go into standby mode after a certain time of inactivity. Usually this interval is about 3-5 minutes, after which the headset "falls asleep" to save energy. Awakening occurs automatically when you remove from the case or when you press the touchpad, if the model supports it, although in Airdots 2 the control is often mechanical, through a button.
💡
For maximum charge savings, always return the headphones to the case immediately after use, even if you plan to put them back on in 10 minutes, which will prevent deep discharge of the lithium-polymer battery.
It's important to understand that not responding to the press doesn't always mean that the device is in a deep sleep state, or that the battery is dead. 15-20 minutes to activate the chemical processes in the battery and bring it back to life.
Mechanical control of buttons and indicators
Despite the lack of an explicit Power button, each Xiaomi Airdots 2 headphone has a functional button hidden under the logo or located on the end, depending on the revision, which is responsible for pairing, on and off.
The manual control process is as follows: prolonged pressing (about 5-7 seconds) leads to the device turning off, which signals a change in color or quenching of the LED indicator. If you press the button for 20 seconds or more, you will completely reset the settings to the factory, which is useful for connection problems.
☑️ Diagnostics of the control button
Be aware of LED signals. Red means charging or low charge, white means being paired or actively connected. Blinking red and white alternately often indicates pairing error or reconnection.
⚠️ Warning: Do not attempt to disassemble the headphone case to look for hidden buttons. Mechanical exposure can damage moisture membranes and impair leakage, which will cause the device to fail if sweat or moisture is ingested.
Resetting settings to factory parameters
Sometimes a standard shutdown doesn’t solve the problem of unstable work, and then a complete reset is required.This procedure clears the memory of the Bluetooth module from stored profiles and returns the Xiaomi Airdots 2 to the “out of the box” state, this is especially true if the headphones are no longer synchronized with each other (only one channel works).
To do the reset, you need to remove both earbuds from the case, then you need to press the buttons on both devices simultaneously and hold them for about 20 seconds. The indicators will flash, then go out, then light up again in red, and this is a signal that the reset process has been completed successfully.
What happens inside when you dump?
After the reset procedure, you need to remove the device from the Bluetooth list on your smartphone (the “Forget the device” function) and perform the pairing again.
Problems with charging case and contacts
A common reason users can't turn off their headphones or, conversely, they don't turn on is contamination of the contacts.The Xiaomi Airdots 2 uses open metal pins that become oxidized or covered with earwax and dust over time.
If the headphone indicator does not turn red when placed in the case, then the contact is broken, in which case the device does not turn off or charge, continuing to consume energy until the full discharge, you need to carefully wipe the contacts with dry lilaless fabric or cotton swab lightly soaked in alcohol.
| Status of the indicator | Meaning | Action. |
|---|---|---|
| Burning red. | Charging's coming. | Waiting for full charge |
| Burning white. | 100% charge or pairing mode | Extract from the case |
| Blinks white | Connection waiting mode | Turn on Bluetooth on your phone |
| It's not burning. | Discharged or no contact | Wipe contacts or charge |
It's also worth checking the contacts inside the case itself, sometimes they can be pressed or contaminated, and careful cleaning often brings the devices back to normal without the need for maintenance.
Working modes and energy consumption
Understanding how Xiaomi Airdots 2 consumes energy will help you manage their work more efficiently. In active music playback mode, the headset consumes maximum current, providing about 4 hours of continuous operation. In standby mode, consumption is minimal, but not zero.
There is also a mono-use mode where only one headphone (usually the right one) is running and the second one is off to save money. To activate this mode, you just need to not remove the second headphone from the case or turn it off manually, which allows you to significantly increase your total listening time during the day.
Bluetooth 5.0 technology used in this model provides low power consumption when transmitting data, but signal quality and distance to the sound source also affect battery consumption, and being in an area with a lot of interference can make the module work harder.
⚠️ Warning: Do not leave fully discharged headphones in the case for a long time (months). Lithium polymer batteries can go into a deep discharge and stop taking charge at all.
Frequently occurring faults and their solution
One common problem is when one headphone is turned off before the other, which may indicate that the batteries are out of sync or wear different degrees, and the first one is helped by re-pairing and resetting, as described above.
If the headphones don't turn off even after you've been placed in the case (the indicator keeps burning or blinking), it's possible that the case doesn't see the device. Check if the ears are sitting tight in the seats. Sometimes it helps to sway the headphone in the nest lightly before the red glow appears.
💡
If none of the methods help turn off or turn on the headphones, it may be a problem with a malfunction of the power controller or a deep discharge of the battery, which requires a replacement of the battery.
In rare cases, a software failure will block the button, and in this situation, only a complete discharge of the device to zero can help, after which it must be put on charge, which will force the power controller to restart.