The lack of tactile response on a smartphone can be very uncomfortable, especially when you are used to confirming every touch. Owners of the popular Xiaomi Redmi Note 5 model often face a situation where the device stops vibrating when typing or incoming call. This does not always mean that the device breaks down, often the problem lies in downed MIUI settings or activated Do Not Disturb mode.
In this article, we will go into detail all the possible ways to return a tactile response to your gadget, we will go from the basic switches in the menu to the hidden engineering settings that allow you to fine-tune the power of the motor, restore functionality takes only a few minutes, if you follow the algorithm of actions.
Before you go into the complex menus, check the obvious: make sure that the side of the case does not stick a physical switch silent mode, if it is provided by a firmware modification, and also banal, but common cause is a discharged battery, as the system can turn off energy-intensive functions to save charge.
Basic sound and vibration settings in MIUI
The first step is to go to the main settings menu, where the main controls of the audio system are concentrated. The interface of the MIUI shell may differ depending on the version of Android, but the logic remains the same. You need to find the section responsible for the audio profiles and activate the corresponding sliders there.
Go to the Settings menu and select Sound and Vibration. This is where the acoustic control center for your Redmi Note 5 is located. Pay attention to the Vibration switch, which should be active. If it's off, the phone won't respond to events even if there's a signal.
In this same section, there's often a separate setting for the keyboard's tactile response, which can be hidden in a submenu or put in a separate line, and make sure that the "Touch Vibration" option is enabled, which will provide a pleasant impression when typing messages.
Be sure to check settings for specific events, such as an incoming call or notification from the messenger.Sometimes the shared switch is active, but for individual applications, a No Sound profile is selected. For the Redmi Note 5, it is critical to check if the No Sound profile is installed globally through the control panel.
Adjusting the force of vibration and tactile response
One of the unique features of Xiaomi's shell is that it can fine-tune the intensity of the vibrator, so it's not just switching on or off, it's full calibration, and you can choose how strong the system's response is to what it does.
To access these parameters, go to Settings → Sound and Vibration → Additional. Here you will see a slider that regulates the force of vibration. By moving it, you can make the response barely noticeable or, conversely, as powerful as possible, this is especially useful for people with hearing impairments or those who wear a phone in tight clothes.
☑️ Verification of vibration settings
It's worth noting that different types of vibrations are used at different stages of the system, and there's a long vibration for calls and a short vibration for keyboards, and some versions of the firmware can be set separately, and if you've changed the settings, but you can't see the result, try rebooting the device to apply the settings.
⚠️ Attention: Set the maximum vibration force can lead to a faster discharge of the battery, as the vibrator consumes a significant amount of energy when operating actively.
Setting the vibration of the keyboard Gboard and Yandex
Users often complain that the phone doesn't vibrate when typing, in which case the problem isn't with Xiaomi, but with the settings of the keyboard itself, and each typer program has its own independent tactile response management mechanism.
If you're using a standard Gboard, press and hold the space button or go to the keyboard settings via the gear icon. Find the Settings and then Preferences section. There's a "Vibration when you press the keys." Make sure it's activated and the duration slider isn't kept to a minimum.
For users of the Yandex keyboard, the algorithm is a little different: Open the keyboard settings, select Sound and vibration, and activate the corresponding switchboard. You can also adjust the response time, and this allows you to create a unique typing rhythm that you're used to.
The secret of long-term key vibration
It's important to understand that if the system is power-saving, it can force the keyboard to turn off vibration to save charge, so if the response is gone after setting up, check the status of the energy-saving mode.
Do Not Disturb and Quiet Mode
One of the most common reasons for vibration to “disappear” is the activation of special modes that block notifications. In the Xiaomi Redmi Note 5, the “Do Not Disturb” function is responsible for this. When it is turned on, the phone can ignore incoming calls and messages without giving sound or light signals.
You can check the status of this mode in the notification curtain. Find the crescent icon. If it's illuminated, the mode is active. Click on it to turn it off. You should also go to the settings of this mode by pressing and holding the icon to make sure that you don't have an automatic turn-on schedule.
There's also a quiet mode, which is often confused with a complete audio blackout. In quiet mode, the phone can vibrate but not make sounds. However, if the settings are down, it can work as a full silent mode. Check the sound profile by switching physical volume buttons.
| Regime. | The sound of the bell | Vibration. | Indicator |
|---|---|---|---|
| Normal. | There is. | There is. | There is. |
| No sound. | No. | There (usually) | There is. |
| Don't disturb. | No. | No (blocked) | No. |
| Just vibration. | No. | There is. | There is. |
Do Not Disturb settings can create exceptions, such as allowing vibrations and calls only for selected contacts, which is a useful feature, but it requires a competent configuration so that you do not miss an important call from a loved one.
Vibration problems after system update
Redmi Note 5 users often experience a situation where the sound settings are reset or not working properly after updating the MIUI firmware, a well-known problem with the conflict between old configuration files and new system rules.
First of all, after the update, you should do a full reset of the audio settings. Don't worry, it won't delete your personal data, photos or contacts. Just put the volume sliders and vibrations again in the Sound and Vibration menu. Sometimes the system requires a reboot to apply new drivers.
💡
After a major firmware update, always check the special features and energy saving settings, as they often reset or change the logic of the operation.
If the vibrations were lost after the update, the new version may have changed the way to the settings. In the more recent versions of MIUI, some parameters were moved to the "Special Capabilities" section. Check the "Special Capabilities" item → Vibration, there may be duplicate control of the motor.
Also, consider that new versions of the shell can be optimized for a different CPU frequency, which affects the timing of vibration. If the problem persists for a long time, it makes sense to clear the cache of the Settings application, but do this carefully.
Diagnostics of hardware malfunction of the vibromotor
If software methods didn't help, it might be the physical damage to the component.The vibromotor in the Xiaomi Redmi Note 5 is a mechanical device that can wear out or fail over time due to falls.
You can use an engineering menu to diagnose this. Dial on the call keyboard the code ##6484##. The CIT test menu will open. Find the Vibrator item in the list and click on it. The device should start vibrating. If there is no vibration in this test and it is on in the settings menu, it is a hardware problem.
⚠️ Attention: If in the test CIT There's a vibration, but there's no vibration in the system, so it's a software problem, so if the motor is silent or it's a strange crack, you need to change the part.
A common cause of failure is the plume connecting the board and the vibrator. When you fall, the contact may move away, and sometimes a light tap on the back cover in the lower speaker area helps, but this is a temporary solution.
Another sign of malfunction is the floating vibration, the phone vibrates, or no, without changing the settings, and it's a sure sign that the motor is still in its final days and needs to be replaced. Fortunately, the Redmi Note 5 makes this component change quite easily and inexpensively.
💡
When buying a new vibrator, pay attention to its voltage and size. Using an unoriginal spare part can cause the vibration to be too weak or, conversely, too powerful, which can damage the board.