How to turn on Xiaomi Earbuds headphones 2: detailed instructions

Activating new wireless headphones often seems like a simple process, but with the Xiaomi Earbuds 2 (often known as the Redmi Buds 2 Lite), users may encounter some subtle nuances when they first start. The main feature of these devices is that they do not have physical on-ear buttons on the body of the headphones themselves or the charging case.

In this article, we will look at all the steps from removing the device from the box to successfully connecting to the smartphone. The right sequence of actions will avoid common mistakes when the gadget does not respond to clicks or does not appear in the Bluetooth list. We will consider not only the standard scenario, but also methods of forced activation if the automation fails.

You don't need any special tools or programming skills to get started, just know where the touch zones are and how to interpret the light indication, and understanding these basic principles will help you to manage your device effectively by switching tracks or answering calls without having to reach your phone every time.

Primary activation and removal of protective films

The most common reason Xiaomi Earbuds 2 doesn't turn on immediately after unpacking is the presence of factory insulation films on charging contacts.The manufacturer deliberately places thin transparent stickers on metal contacts inside the headphones to prevent battery discharge during storage in stock. Until these films are removed, the device is in deep sleep and does not respond to the opening of the case cover.

To activate the gadget, you need to remove both headphones from the charging case and carefully examine their bottom. You will see small metal areas that must contact the pins inside the case. Be sure to remove all protective stickers from the contact areas before the first attempt to charge or turn on. Without this step, the electrical contact will not be established, and the device will not receive a wake-up signal.

After removing the tapes, place the headphones back in the case. The indicator on the front of the charging case should light up, signaling the start of the charging process. If the LED does not catch fire, check if the magnets and contacts fit tightly. Sometimes you need to slightly press the headphones with your fingers to make sure they are sitting in their nests before the characteristic click.

It is important to understand that even if the battery was partially discharged in stock, it may take several minutes to connect to the power source to activate the control system in the first place. Give me the control system (BMS) stabilize the voltage before starting operation.

Automatic recovery mechanism

The main way to turn on the Xiaomi Earbuds 2 headphones is through their design. The device goes from sleep to operation automatically when you remove them from the charging case. Inside the case are magnets and contact groups that break the power circuit or change the logical signal level when the earphone leaves its place, which means that there is no separate Power button on the case.

The process is this: you open the case cover, you take the earpiece by the foot or main bowl, and you take it out. At this point, the built-in accelerometer and the decharging sensor initiate the boot of the earphone operating system. You will be informed of the successful turn on by the voice assistant (usually speaking "Power on" or "Connected") and/or a light indicator that can flash white or blue depending on the firmware modification.

⚠️ Warning: If you take out your headphones, but they're silent and they don't sound like a greeting, maybe the safety thing worked. 5-10 seconds, and then re-extract, but already holding both earbuds at the same time.

Sometimes users are faced with a situation where one earphone turns on and the second one remains off, which can be due to the sticking of the sensor in one of the sockets of the case, in which case you need to wipe the contacts with an alcohol napkin and make sure that the socket is free of dust or pile, which prevents the headphone from mechanically exiting from charging mode, and the purity of the contacts is a key factor in the stable operation of the onset automation.

Conjugation mode and status indicators

Once the device is turned on, it automatically goes into the search mode for a previously connected device. If pairing occurs for the first time, the Xiaomi Earbuds 2 goes into the Airing mode, becoming visible to other gadgets. Understanding the color indication of the LEDs will help you determine exactly what state the device is in at the moment.

The LED light on the case and on the headphones themselves (if there is one on the bowl) provides important technical information. For example, flashing white light usually means that the headphones are ready to connect. A quick blink may indicate an attempt to reconnect to the last device. Below is a table deciphering the main states of the indicator.

To get into manual pairing mode, if the automatic didn't work, you can use touch control. Usually, long-term retention of the touch zone (about 5-7 seconds) on both headphones simultaneously puts them in visibility mode, at which point the indicators will flash quickly, signaling readiness for Bluetooth connection.

Use of the Xiaomi Earbuds / Mi Wear app

While basic audio playback and inclusion work without additional software, it is highly recommended to use a proprietary application to fully customize Xiaomi Earbuds 2. In the Xiaomi ecosystem, this can be Mi Wear (formerly Mi True Wireless) or Xiaomi Earbuds, depending on the region and firmware version. It is through this interface that you can update firmware, which often solves problems with unstable inclusion.

Once you connect your headphones to your phone through the standard Bluetooth menu, open the app. It automatically detects the connected device and suggests adding it to your gadgets list. Inside the app, you can adjust the touch gestures, check the charge level of each earphone separately, and select the noise reduction mode (if the model supports ENC).

⚠️ Note: If the app doesn’t see the headphones, even though they appear as “Connected” in Bluetooth, try disabling them in your phone’s Bluetooth settings, closing the app and opening it again.

The app's settings section also has a headphone search feature. If you've lost your device and can't tell if it's on, using Search will make the headphones squeak loud, which will help Locate locate them. This also confirms that the device is active and functioning correctly. Regular firmware updates through the app eliminate bugs associated with "sleeping" the headphones.

Forced reset and reset (Hard Reset)

In situations where standard on-board methods don't work, headphones are stuck or not connected to the phone, a forced reset is required.This procedure returns the Xiaomi Earbuds 2 to factory settings and often resolves software errors that block the on-off. This is analogous to rebooting the computer when the system is not responding.

To perform the reset, place both headphones in a charging case. make sure they charge (case indicator is on). Then find the function button on the case (if you have one in your revision) or use touch control. Most Redmi Buds 2 Lite / Xiaomi Earbuds 2 models need to press and hold the touch zones on both headphones simultaneously for 10-15 seconds until the indicators flash red or orange.

Discharge procedure:


1. Put the headphones in the case.




2.Push and hold the sensors 10-15 seconds.




3. Wait for the indicator to flash.




4 Remove and reconnect.

Once successfully reset, the headphones will automatically turn off and go to standby mode. Remove them again to initiate the turn on. Now the device will look like new to the phone, and you will need to remove the old pairing from the list of Bluetooth devices of the smartphone before reconnecting. Resetting is a powerful diagnostic tool that is worth using for any oddities in the behavior of the gadget.

💡

Hard Reset eliminates 90% of software errors associated with the failure to turn on or connect only one headphone.

Diagnostics of charging and inclusion problems

If none of the above methods helped turn on the headphones, the problem may lie in the absence of charge or fault of the charging circuit. Lithium polymer batteries used in Xiaomi Earbuds 2 have deep discharge protection. If the device has been lying unused for a long time, it may not react to short connections to the network.

Try to leave the case with the headphones inserted on charge for at least 30-60 minutes, even if the indicator does not light up immediately. Sometimes it takes time to "swing" the battery and raise the voltage to a level sufficient to start the power controller. Use a cable and power supply with a current of no more than 1A (a standard USB port of the computer or old charge from the phone), as powerful units (Fast Charge) may not correctly initiate charging low-power devices.

• 🔌 Check the cable: Try replacing it USB-cable, as it can transmit current only for power but do not have serviceable data lines or be damaged inside.
• 🧹 Contact cleaning: Use a cotton swab dipped in alcohol to clean the gold contacts on the headphones and inside the case.
• 🔋 Alternative source: Try charging the case from another source (Power Bank, another unit) to rule out a malfunction of the socket or adapter.

If after an hour of charging from a serviceable cable and power supply, the case indicator does not light up and the headphones do not show signs of life when removed, there is probably a hardware malfunction. This may be a failure of the battery or charge controller. In this case, self-opening is not recommended, since it can damage the fragile structure and break the leakage.