How to turn on Xiaomi Redmi AirDots headphones: the full guide

Modern wireless headphones have become an integral part of the digital ecosystem, and Xiaomi models are at the forefront due to the availability and sound quality. However, new owners often wonder how to properly activate the device out of the box, since there is no usual power button on the case. The process of launching Redmi AirDots (the names T1, T2, Redmi Buds) is radically different from including smartphones or tablets. Understanding this mechanism is critical to avoid false conclusions about the inability of the gadget.

The main feature of the design is that the Bluetooth headset goes into active state automatically when removed from the charging case. When the headphones are off, they are in deep sleep mode to save battery power. If you first unpack the device or it is completely discharged, a simple recess from the case may not lead to the desired result - the indicators will not light up, and the phone will not detect the device.

In this article, we will discuss in detail the initial activation algorithm, how to force the on-line crashes and how to pair with different operating systems. You will learn how to distinguish low-charging from standby, and what to do if only one headphone is running.

Principle of operation and primary activation

The key to switching on is the design of the charging case, and inside the case, there are contact pads (pins) that close the circuit when you put the headphone inside. While the Redmi AirDots are in the case, they either charge or they're off. Once you open the lid and remove the headphones, the magnets inside the case open the contact, and the device gets a trigger, but this only works when there's a residual charge.

If the headphones were new or were idle for a long time, the battery could go into a deep discharge, in which case the indicators may not catch fire immediately after removal, you will need to connect the charging case with the earphones nested to the USB power source for at least 15-20 minutes, only after accumulating the minimum voltage, the system will allow the device to turn on.

• ⚡ Remove the headphones from the case – they should flash white.
• 🔌 If there is no reaction, place them back in the case and plug in the charging.
• 🔋 Make sure that the protective films on the contacts are removed (relevant for new models).
• 👀 Watch the indicator: flashing red means charging, switched off – full charge.

💡

Before first use, be sure to remove the transparent protective films from the charging contacts on the headphones themselves, if any. Often the factory insulation blocks charging, and the user thinks that the device is malfunctioning.

It is important to note that pressing the touchpad or physical button (depending on the model) while in the case will not turn the device on.Mechanical impact is ignored by the power management system while the earbud is in the "nest", this is done to prevent accidental activation and discharge of the battery in the bag or pocket.

Preparation for first interface

Before you try to connect the headphones to your smartphone, you need to put them in search mode (pairing). Once removed from the Redmi case, the AirDots automatically flash (usually in white), which signals a search for a previously connected device. If the gadget is turned on for the first time, it immediately becomes visible for scanning. In some cases, if the headphones were previously connected to another phone, they need to be transferred to forced pairing mode.

To do this, while out of the case, press and hold the touch zones on both headphones simultaneously for 5-7 seconds. Indicators will flash red and white (or flash white quickly, depending on the firmware version). This means that the Bluetooth module has entered detection mode. At this stage, you can open the phone settings.

There's an important caveat for touch-controlled models: touching should be confident, but not overly strong. The sensor responds to a change in capacity, so using with gloves or wet fingers can make it difficult to enter the setting mode.

⚠️ Warning: Do not leave the headphones outside the case for a long time in blinking mode if pairing does not occur.This leads to a deep discharge of the battery, which adversely affects its life.

Instructions for connecting to Android and iOS

The process of pairing with mobile devices is standardized, but has its own peculiarities depending on the operating system. To begin, open the Bluetooth settings on your smartphone. Make sure that geolocation is enabled (this is an Android requirement for finding devices), and click on "Device Search" or "Add a new device."

In the list of available gadgets you will see the name of the model, for example, Redmi AirDots or Redmi. AirDots_R. It's important to choose a device without the R (Right) prefix if it's one, or wait for the system to merge the channels itself. 3 before 10 seconds.

iPhone (iOS) owners should be aware that advanced functionality (displaying the charge of each headphone separately) may require installing a third-party application, since the native Xiaomi protocol is not always fully supported by iOS without additional software.

Problem Solving: Only one headphone works

One of the most common problems users face is when only one headphone (usually the right one) is turned on and playing and the second one is silent, and it's not a marriage, but a synchronization failure between the left and right modules, and the headphones are out of sync and work as two independent devices, or one of them has lost a partner.

To fix this, you need to reset. First, forget the device in your phone's Bluetooth settings and turn off Bluetooth itself. Then place both earbuds in the case, close the lid and wait 10 seconds. After that, remove them simultaneously.

If the problem is not solved, perform a hard reset:

1. Remove the headphones from the case.
2. Turn them off (if they are on) or simply press the sensors for 5-10 seconds until they turn off (the indicators go out).
3. Without removing the headphones in the case, press the touch panels on both headphones at the same time and hold for about 20 seconds.
4. The indicators should flash 3-4 times (red/white), after which the headphones will turn off.
5. Put them in the case, close, then re-extract them for automatic inclusion and pairing.

Features of operation and management

Once successfully enabled and connected, it is important to learn how to control the device correctly. Redmi AirDots models use a touch control system or mechanical buttons (depending on the version); Double tap is usually responsible for pause/play or call the voice assistant, and triple tap is responsible for switching tracks or calling the last number.

For owners of Android-smartphones with a shell MIUI There is a possibility of automatic pop-up window with a battery charge when opening the case (function) MIUI For other devices, the charge level can be viewed in the Bluetooth widget or through special companion applications, such as: MI Buds or AndroPods.

Sound quality and connection stability are directly dependent on battery power. When the charge level is lowered below 20%, the headphones can go into power saving mode, which sometimes leads to intermittent sound or disconnection of one of the channels. Watch the indication: if the indicator lights up red once every few seconds, the device requires recharging.

⚠️ Note: Do not use headphones at temperatures below 0°C or higher than 45°C. Extreme temperatures can cause irreversible damage to the lithium battery and lead to power failure.

Frequently Asked Questions (FAQ)

💡

Proper initial activation and timely recharging are key factors in the long-term service of your wireless headphones. Don't ignore low-charging signals.