How to turn on and configure equalizer on Xiaomi Redmi Note 7: the complete guide

Xiaomi Redmi Note 7 is one of the most popular smartphones in the budget segment, but its sound capabilities are often underestimated. Many users do not even suspect that the device is equipped with a built-in equalizer that allows you to fine-tune the sound to your preferences. Without the right setup, bass can sound deaf, high frequencies can cut your ear, and voice in headphones – seem muffled.

In this article, we will analyze all the ways to activate the equalizer on the Redmi Note 7 - from standard tools. MIUI You will learn how to improve the sound on YouTube, Spotify, when listening to music through a speaker or headphones, and why settings are sometimes reset after a system update. We will pay special attention to typical mistakes, because of which the equalizer may not work, and give recommendations on the optimal presets for different genres of music.

Where is the equalizer in standard settings MIUI

At Redmi Note. 7 Equalizer built into system application Music (MIUI Music Player), but its location depends on the firmware version. MIUI 12/13/14 The path to settings has changed, so we will look at both options.

If you have an original global or European firmware without custom modifications, the equalizer should be available by default.

• 📱 Open the Music app (icon with a music mill).
• ⚙️ Click on the three dots in the top right corner and select Settings.
• 🎛️ Scroll down to the Sound Effects or Equalizer section (depending on version).
• 🔊 Turn on the Equalizer switch and select one of the presets (Rock, Pop, Jazz, etc.).

If your menu does not have an Equator option, it could mean:

• 🔄 You have a stripped-down version installed. MIUI (For example, for some regions).
• 📵 The function is disabled at the firmware level (often found in custom assemblies).
• 🔊 You use a third-party player that blocks the system equalizer.

Why the equalizer may not be in the settings

About 30 percent of Redmi Note 7 users experience a problem when the equalizer partition simply disappears from the menu, and the reasons may be software-related or hardware-related.

If you use custom firmware (like LineageOS or Pixel Experience), system equalizer MIUI It's not available. In that case, you'll have to install third-party solutions like this. ViPER4Android or Wavelet.

⚠️ Note: On some versions MIUI For the Redmi Note 7 (especially Android 9), the equalizer only works with connected headphones. If you try to adjust the sound through the speaker, the partition may not be active.

Activation of the hidden equalizer through the engineering menu

If the standard methods didn’t work, you can try to turn on the equalizer through the Engineering Mode, which works on most Xiaomi devices, but you need to be careful – incorrect settings can lead to malfunctions in the audio system.

Instructions for activation:

Enable Developer Mode (7 times click on Build Number in Settings) → The phone)

Make sure that the battery is >50%

Connect headphones (for testing)

Record the current sound settings (in case of resetting)-->

1. Open the Phone app and enter the combination: ##36446337###
2. Select the Hardware Testing → Audio section.
3. Go to LoudSpeaker Mode (for speaker) or Headset Mode (for headphones).
4. Press Set. EQ and select one of the presets or set up the sliders manually.
5. Save the settings with the Set button and restart the phone.

After these manipulations, the equalizer should appear in the standard player. EQ It is not available, so your version of the engineering menu does not support this function.

Set up an equalizer for different scenarios

There are no universal equalizer settings – the optimal settings depend on the genre of music, the type of headphones and even the acoustics of the room. Below are recommendations for the most popular use cases of the Redmi Note 7.

🎵 To listen to music through headphones

If you use standard Xiaomi headphones or budget models up to 1000₽, Try the following settings:

• 🔊 Bass (60–250 Hz): +3–4 dB (for depth)
• 🎶 Medium (250–2000 Hz): 0 dB (to avoid drowning out vocals)
• 🔈 High (2000–16000 Hz): +1–2 dB (for brightness)

For headphones with improved bass (for example, Xiaomi Hybrid Pro) you can reduce the low frequencies to +1–2 dB to avoid distortion.

📺 For watching videos and movies

When viewing through the speaker of the smartphone, it is important to increase the average frequencies (500-1500 Hz) to better hear the dialogue.

• 🔊 Bass: +2 dB
• 🎤 Average: +3 dB
• 🔈 High: 0 dB

🎤 For voice calls and podcasts

To improve speech intelligibility, turn off all effects and set:

• 🔊 Bass: -2 dB (remove the hum)
• 🎤 Average: +4 dB (reinforce voice)
• 🔈 Tall: +1 dB (for clarity)

💡

If you often listen to music in transport, turn on the Adaptive Sound (if any) option in the equalizer settings, which automatically adjusts the frequencies depending on the level of external noise.

Third-party applications for advanced sound tuning

If the built-in equalizer MIUI It seems too limited, you can install one of the specialized applications, they offer more presets, support. 3D-sound and even customization for individual applications (for example, enhance bass only in Spotify).

Top.-3 apps for Redmi Note 7:

• 🎛️ ViPER4Android FX — The Most Powerful Supported Solution DDC It requires root rights for full functionality, but it works without them in limited mode.
• 🔊 Wavelet is a lightweight equalizer with automatic correction for your headphones. LDAC aptX.
• 🎧 Poweramp Equalizer is a built-in Poweramp equalizer that can be used separately. It has a 10-band graphic equalizer.

Installation ViPER4Android on the Redmi Note 7:

1. Download the latest version APK from the official website (vipersaudio.com).
2. Install the application and launch it.
3. Enable Driver Status (if you need a root, grant permissions via Magisk).
4. Select a Headphone or Speaker profile and set up the sliders.
5. Activate Master Limiter to protect speakers from overload.

⚠️ Attention: When in use ViPER4Android And without root rights, the audio can be interrupted periodically, because of Android's restrictions on modifying the audio stream (AML) via Magisk.

Solving Equalizer Problems

Even after successful setup, the equalizer on the Redmi Note 7 may not work smoothly, and here are the most common problems and solutions:

After the update MIUI The equaliser is missing, try it:

1. Reverse to the previous version of the firmware through Fastboot.
2. Install MIUI Sound Assistant from Google Play (sometimes restores functionality).
3. Reset the sound settings to factory in Settings → Sound. → Resetting settings.

💡

On devices with Android 10 and above system equalizer MIUI Adaptive sound may conflict with Adaptive sound. Turn it off in the sound settings if the equalizer is not applied.

Comparison of built-in and third-party equalizer: which is better

Choice between standard equalizer MIUI And third-party solutions depend on your needs. Let's compare them by key parameters:

For most Redmi Note 7 users, a built-in equalizer will suffice, especially if you're listening to music through headphones. However, if you need fine tuning for specific tracks or support for Hi-Res Audio, third-party apps like the one that's on the phone are not available. ViPER4Android They're the best choice.

FAQ: Frequent questions about the equalizer on the Redmi Note 7