How to increase volume on Xiaomi Mi 9T: from standard settings to engineering menu

Xiaomi Mi 9T is one of the most popular smartphones of the brand, but many users are faced with the problem of insufficient volume of speakers or headphones. Even at the maximum level, the sound can seem quiet, especially in noisy conditions or when listening to music with bass. In this article, we will discuss all possible ways to increase the volume, from basic Android settings to hidden MIUI features and third-party applications.

It's important to understand that volume limits are often set by the manufacturer to protect the speakers from overload, but with the right approach, you can safely boost the sound without risking damage to the machine, and we'll look at both software and hardware methods, and we'll also be careful about dangerous actions that can lead to failure.

If you're willing to experiment, you'll get started. But remember, changing system parameters is always risky. We recommend that you try out the safe ways in the first section, and then move on to the advanced techniques.

1. Standard volume settings in MIUI

Before you climb into the engineering menu or install third-party utilities, check the basic sound parameters in the MIUI firmware. Often the problem is solved in just a few taps.

Open Settings → Sound and vibration. Key regulators are available here:

• 🔊 Media volume is responsible for the sound in applications (music, video, games) and check if the slider is on the average level.
• 📞 Call volume - separates the sound of calls, sometimes users confuse these settings.
• 🚫 Do not disturb – make sure the mode is turned off or configured correctly (e.g., does not block the sound of notifications).
• 🎧 Headphone volume -- you plug in the headset, and you can set a separate sound level.

Pay special attention to the item Additional settings → Amplification of sound (if you have it in your version of MIUI). This option activates hardware amplification of the signal, but can slightly distort the sound at maximum volume. Also check if the Safe Sound mode is activated - it automatically lowers the volume during prolonged listening.

Activation of Dolby Atmos mode

The Xiaomi Mi 9T supports Dolby Atmos technology, which not only improves spatial sound, but can indirectly increase perceived volume by optimizing frequencies.

To activate it:

1. Go to Settings → Sound and vibration → Sound quality.
2. Select Dolby Atmos (if no option, upgrade to the latest version of MIUI).
3. Turn on the switch and select a profile: 🎵 Music – Optimizes medium and high frequencies. 🎬 The film enhances bass and spatial sound. 🎮 The game focuses on the clarity of sound effects.

When Dolby Atmos is activated, the sound will become more saturated and the perceived volume will increase by 10-15%. However, keep in mind that at maximum levels distortion can occur — this is normal for small smartphone speakers. If the effect does not suit you, go back to standard mode.

💡

For better effect from Dolby Atmos, use headphones with support for Hi-Res Audio. They will be more noticeable than in speakers.

3.Use of the Engineering Menu (MTK Engineer Mode)

If the standard settings didn't work, you can try to turn up the volume through the engineering menu.The Xiaomi Mi 9T is built on a Qualcomm Snapdragon 730 chip, so we'll need a code to log into Qualcomm's service menu.

Warning: Changes to the engineering menu may cause damage to the speakers or loss of warranty.

Instructions:

1. Open the Phone app and type in the combination: ##36446337## (if it doesn't work, try ##4636## → Hardware Testing → Audio).
2. Select Hardware Testing → Audio → LoudSpeaker Mode.
3. Check the current values: Max Vol is the maximum volume (usually 160-180). Current Vol is the current level.

Max Vol

Don't put it above 200!

Save the settings and restart the phone.

Make a backup copy of the data|Record the current values of Max Vol.|Not exceed 200|Be prepared to re-flash when a failure occurs-->

Check the sound after you restart, and if you have any wheezing or distortion, you can return the settings you had before, and you can also note that after you update MIUI, the values in the engineering menu may reset.

4. Third-party applications for sound amplification

If you don't want to go through the system settings, you can use the specialized tools from Google Play, which are software-based and usually safe for the device.

Top.-3 applications for Xiaomi Mi 9T:

The easiest option is the Volume Booster.

1. Launch the application and give access to the sound settings.
2. Move the Boost Level slider by 15-20%.
3. Activate the Safe Mode option to avoid distortion.
4. Check the sound in the player or YouTube.

⚠️ Attention: Apps like ViPER4Android You need to install additional drivers through Magisk. Installation that is not right can lead to bootloop. If you are not sure, use simpler tools.

5. Cleaning of speakers and checking of hardware malfunctions

Sometimes the problem is not the settings, but the physical contamination of the speakers. Xiaomi Mi 9T has two speakers: the main (bottom) and the conversational (top, used for calls), their grids can get clogged with dust, which significantly reduces the volume.

How to clean the speakers:

• 🧹 Use a soft brush (for example, for drawing) or compressed air (a balloon!
• 💧 With severe pollution, you can gently wipe the net with a wet wipe (without alcohol!).
• 🔊 Check the sound after cleaning – if there are no improvements, the problem may be a hardware breakdown.

Also note:

• 🔋 Battery condition – when the wear is severe (below 70% capacity), the phone can automatically turn down the volume to save energy.
• 🛠️ Damage after falls – even a small impact can displace the speaker or disrupt its contacts.
• 💧 Moisture intake – oxidation of contacts leads to distortion and decrease in volume.

⚠️ Warning: If the sound is still quieter or there is a crack, it is a sign of damage to the speaker membrane, and if you do that, you can only change the module at the service center.

6.Alternative methods: from root rights to speaker replacement

If none of these methods work, radical measures remain, requiring technical skills and can void the warranty.

Ways for Advanced Users:

• 🔧 Root rights + Mixers modification: You can edit the file with Root Explorer /system/etc/mixer_paths.xml, parameterize <path name="speaker">. However, this is risky – the error will lead to a complete loss of sound.
• 🔄 Custom core firmware: Some cores (e.g. FrancoKernel) have advanced sound settings. Requires bootloader unlocking and experience with the software TWRP.
• 🔨 Replacement of speakers: Original speakers for Mi 9T stand ~500-800 rubles. the replacement takes 20-30 minutes with tools (suction cup, mediator, hair dryer).

If you are considering replacing the speakers, consider:

• Buy only original parts (bottom speaker: MDY-007).
• Watch for polarity when connected – improper connection will lead to a lack of sound.
• After replacement, check the tightness - dust and moisture will quickly disable the new speaker.

💡

Root rights and custom firmware give you maximum control over sound, but require deep knowledge. For most users, standard settings and speaker cleaning are enough.

7. Frequent mistakes and how to avoid them

When trying to turn up the volume, many users make critical errors that lead to breakdowns.

• 🚫 Install Max Vol above 200 in the engineering menu - this will lead to burnout of the speaker coil.
• 🚫 Use "sound amplifiers" without limiters - applications like Bass Booster can produce a distorted signal that physically damages the membrane.
• 🚫 Clean speakers with alcohol or acetone - they corrode glue and seals.
• 🚫 Sending informal modifications MIUI without a backup - this is fraught with "bricking" the phone.

Also avoid:

• 🔋 Using your phone when charging at maximum volume – this puts additional stress on the battery and audio chip.
• 🎧 Headphone connections with impedance below 16 ohms – the smartphone is not designed for such a load.
• 🔊 Long-term listening at maximum - even if the speakers withstand, the hearing deteriorates irreversibly.

⚠️ Warning: If after manipulating the sound, the phone spontaneously reboots or the speakers are constantly beeping, this is a sign of damage to the audio codec. Immediately return the standard settings and contact the service.

FAQ: Answers to Frequent Questions