How to increase volume on Xiaomi Redmi 9 Pro: from standard settings to hidden features

Xiaomi Redmi 9 Pro is a popular smartphone with good specs, but many users face the problem of insufficient volume of speakers or headphones. Even at the maximum level, the sound can seem quiet, especially in noisy rooms or when listening to music through external speakers, the reasons for this lie in both hardware limitations (amplifier power, speaker size) and software - the manufacturer often lowers the volume in the MIUI firmware to protect the speakers from overload.

In this article, we’ll look at 7 proven ways to turn up the volume on the Redmi 9 Pro, from basic system settings to working with engineering menus and third-party utilities. It’s important to understand that some methods can affect sound quality or speaker life, so we’ll point out the risks and give you recommendations for safe use. If you’re willing to experiment, let’s go!

1. Check basic sound settings in MIUI

Before resorting to radical measures, make sure all standard audio settings are set correctly. Often users miss obvious points that can affect the volume.

Open the Settings → Sound and vibration and check:

• 🔊 Media volume - slider should be at maximum. Separately adjust the volume for multimedia, calls and alarms.
• 🎧 Amplify the sound in the headphones - turn on the option MI Sound Enhancer (if available in your version) MIUI).
• 🔇 Do Not Disturb Mode – Turn it off or set media exceptions.
• 📱 Adaptive sound — this feature automatically adjusts the volume to the surrounding noise, but sometimes it doesn't work properly.

It is also worth checking whether No Sound or Vibration is activated through the Quick Settings Panel (swipe down from the top edge of the screen). If the volume has not changed after these manipulations, move to deeper settings.

⚠️ Note: If after the update MIUI Some menu items are missing (for example, MI Sound Enhancer, this may be due to Xiaomi's policy of simplifying the interface. In this case, try resetting the sound settings to factory via Settings. → Annexes → Application management → Settings (⚙) → Resetting settings.

2.Use of uniform volume distribution (Dolby Atmos)

The Redmi 9 Pro supports Dolby Atmos technology, which not only improves spatial sound, but also allows you to fine-tune the volume for different frequencies. However, by default, this feature can be disabled or work in limited mode.

To activate and configure Dolby Atmos:

1. Go to Settings → Sound and vibration → Sound effects.
2. Select Dolby Atmos and turn on the slider.
3. In the Profile section, select Movie, Music or Voice – each of them distributes the volume differently by frequency.
4. Activate Adaptive Sound (if available) to automatically adjust to your surroundings.

For a more subtle setting, tap on the icon ⚙ In the upper right corner, experiment with manual equalizer controls, for example, increasing the low frequencies (bass) can subjectively make the sound louder, although the actual amplitude of the signal will not change.

If your firmware doesn’t have Dolby Atmos, it could be region- or MIUI version-related, in which case try installing it via Google Play (Dolby Access app), but note that not all features will work on uncertified devices.

3. Engineering menu: hidden volume settings

The Xiaomi Redmi 9 Pro has a hidden engineering menu where you can manually increase the volume of speakers and headphones, a method that requires caution, as incorrect settings can lead to distortion of the sound or damage to the speakers.

Instructions for entering the engineering menu:

1. Open the Phone app and enter the combination: ##36446337###
2. You will be taken to the Engineering Mode menu (if the combination doesn't work, try ##4636## and select Hardware Testing → Audio).
3. Go to Hardware Testing → Audio → LoudSpeaker Mode.
4. Here you'll see Max Vol settings for different types of sound. The default is usually set to 150 or 160. Try to zoom in to 180-200, but not higher!

For headphones, the path will be similar, but select Headset Mode. After the changes, reboot the phone to make the settings apply.

⚠️ Attention: An increase in values above 200 can cause overloading of speakers and their physical damage, there may be distortion of sound at high volume. If after the changes there is a wheezing or crackling, return the values to the standard ones.

Write down the current Max Vol values for each mode.

Do not increase the value by more than 20-30 units at a time.

Check the sound after each change.

Restart your phone after settings-->

4. Third-party applications for sound amplification

If standard methods don't work, you can use third-party utilities, which work on two principles: either amplify the digital signal (which can lead to distortions), or optimize the frequency distribution for subjective volume increase.

Top.-3 Proven applications for Redmi 9 Pro:

• 🎛️ Volume Booster GOODEV — It allows you to increase the volume to 200 percent of the standard volume, but it requires caution in settings.
• 🔊 Precise Volume – gives precise volume control in 1% increments, which is useful for fine tuning.
• 🎧 Wavelet – an application with support LDAC and aptX, which improves the sound in headphones and can slightly increase the volume due to optimization of codecs.

When using these applications, monitor the temperature of the phone - amplifying the sound increases the load on the processor, and some utilities require root rights, which is not safe for inexperienced users.

💡

Before installing third-party utilities, check for MIUI compatibility reviews. Some applications may conflict with system audio services, causing freezes or reboots.

5. Update firmware and reset settings

Sometimes the problem with low volume is due to software bugs in the current version of MIUI. Xiaomi regularly releases updates that fix similar errors.

1. Go to Settings → About the phone → System update.
2. Click Update Checker and install the available packages.
3. If there are no updates, try manually downloading the latest version. MIUI Redmi 9 Pro from Xiaomi’s official website and install it via System Update → Menus (⋮) → Select a firmware file.

If the problem appears after the update, try resetting the sound settings:

1. Go to Settings → Applications → Application Management.
2. Press on. ⋮ → Show all applications → Settings (⚙).
3. Select Warehouse. → Clear the data.

This will bring all sound parameters back to factory settings, which sometimes helps to eliminate software limitations.

Hardware methods: cleaning speakers and replacing the grid

If the software didn't work, the problem could be the physical contamination of the speakers, and over time, the lattice accumulates dust, pile or moisture, which makes it less permeable.

• 🧹 Use a soft brush (for example, for drawing) or compressed air (a balloon) to remove dust from the speaker holes.
• 💧 If you get a liquid, don't dry with a hair dryer, put your phone in a dry place with good ventilation for 24 hours, and you can speed it up with silica gel).
• 🔧 If the speaker grid is deformed or torn, it can be neatly replaced. For the Redmi 9 Pro, AliExpress replica will do. M2007J3SC).

Also check if the case covers the speaker holes. Some security accessories have too thick edges to block the sound. Try removing the case and comparing the volume.

7.Alternative solutions: external amplifiers and Bluetooth adapters

If all of the above methods fail, consider using external devices:

• 🔊 Portable Bluetooth speakers – even budget models (like the Xiaomi Mi Portable Speaker) sound louder than built-in speakers.
• 🎧 Headphone amplifiers – devices like FiiO A1 or SoundMagic HP101 Increase signal power without distortion.
• 📱 Bluetooth transmitters with amplifier – connect to a 3.5 mm connector and transmit a strengthened signal to wireless headphones.

The Redmi 9 Pro will also be suitable for a USB-C hub with headphone access if the 3.5 mm connector is damaged or does not provide enough volume.

⚠️ Warning: When using external amplifiers, monitor the volume level on the phone itself. If the Redmi 9 Pro is at its maximum and the amplifier is also at its maximum, this can damage the membrane of the headphones or speakers. Optimum: 70-80% volume on the phone + booster-setting.

💡

If none of these methods worked, the problem could be a hardware malfunction of the speaker or audio chip, in which case the only solution is to contact the Xiaomi service center.

FAQ: Frequent Volume Up questions on Redmi 9 Pro