How to increase the volume of the speaker on Xiaomi Redmi Note 7 during a conversation: 7 proven ways

Owners of the Xiaomi Redmi Note 7 often face the problem of low volume speaker. Even at maximum settings of the interlocutor’s sound can be difficult to hear in noisy environments or on the street. The reasons can be due to both the software limitations of the MIUI and the hardware features of the model. In this article, we will discuss all possible methods of volume gain, from basic settings to advanced technical solutions.

It's important to understand that the Redmi Note 7 has a single speaker on top of the body, and it's limited in design, but software can make the most of the hardware, some require root rights, others work without them, and we'll describe each option in detail, with risks and benefits.

If the volume is not enough after all the manipulations, the problem could be the physical wear of the speaker or the contamination of the mesh, which would require professional diagnostics, but 80 percent of the time, it's software solutions that help, and we'll look at them first.

1. Basic sound settings in MIUI

Start by checking the standard settings of the system, and users often miss out on obvious options that can significantly improve audibility.

Go to Settings → Sound and vibration. Here, pay attention to the following points:

• 🔊 Call and notification volume – set the slider to maximum (not to be confused with media volume!)
• 📞 The volume of the conversation is a separate regulator that many people miss
• 🔇 Sound amplification – option available on some versions MIUI (includes an additional soft boost)
• 🎧 Adaptive sound – automatically adjusts the volume to the surrounding noise

Pay special attention to the item "Speak volume": in Redmi Note 7 it is sometimes reset after updates. If the slider is not available for change, this may indicate a failure in the audio driver - you will need to restart the device or reset the audio settings.

💡

After changing the audio settings, make a test call to another number (such as voicemail) to help you objectively assess the changes without the impact of network interference.

2. Engineering menu: hidden opportunities

Xiaomi hides a number of service settings in the engineering menu, where you can manually increase the volume of the microphone and speaker, bypassing the limitations of MIUI. Careful: the wrong settings can lead to distortion of the sound or damage to the speaker.

To open the engineering menu:

1. Open the phone application
2. Enter the combination: ##4636##
3. Select Phone Information (or Hardware Testing on some firmware)
4. Go to Audio → Volume

In this section you are interested in parameters:

• 🔈 Sph (microphone) – do not change unless you have problems with your voice transmission
• 🔊 Sph2 (Speaker – Increase the value of 5-10 unit
• 📞 Ring (calling) – does not affect the volume of the conversation
• 🎵 Media (media) – responsible for the volume of music and video

Remember the initial values of all parameters | Increase the volume gradually (maximum +10 units at a time) | After changes, restart your phone | Check the sound on different types of calls (regular, VoLTE, conference)

-->

Critical Warning: Values Above 160 for Sph2 Can cause sound distortion and overload of the speaker on the Redmi Note 7. Optimal range — 140-155.

3. Resetting the sound settings to factory

If previous methods didn't work, the reason could be a failure of the system's sound parameters. MIUI has a hidden audio reset function that returns all parameters to factory values, but often solves problems with low volume.

Follow the following steps:

1. Go to Settings. → The phone.
2. Click 7 times on the MIUI version to activate the developer mode
3. Go back to the main settings and open additionally. → For developers
4. Find the Reset of Sound Settings (or Audio Tuning Reset)
5. Confirm reset and restart the device

After the reboot, check the volume of the speaker, if the problem was a software failure, the sound should normalize, a method that is especially effective after unsuccessful experiments with engineering menus or third-party applications to amplify the sound.

Yeah, to tune the sound.|Yes, for other purposes.|No, I'm afraid to break something.|I didn't know he existed.-->

4. Volume-boosting applications

If standard methods don't work, you can use third-party utilities, which work on two principles: either modify the system audio settings or process sound software. The following solutions are suitable for the Redmi Note 7:

For the Redmi Note 7, without root rights, SoundAbout is the best choice, and it allows you to redirect the sound of the conversation to the main speaker (bottom), which is usually more powerful than the conversational speaker, and the setting is as follows:

1. Install the app from Google Play
2. Select Media Audio → Phone Call
3. Specify Speaker instead of Earpiece
4. Save the settings and test it out.

⚠️ Attention: use ViPER4Android with incorrect settings can damage the speaker due to excessive load.Do not increase the volume by more than 6 dB and always test the sound on short calls.

5. Cleaning dynamics and checking the hardware

If software methods don't work, the problem could be physical. The Redmi Note 7 speaker is located at the top of the front panel under the safety net, and over time it gets clogged with dust, which reduces volume by 30-40%.

For cleaning:

1. Turn off the phone and remove it. SIM-map
2. Take a soft toothbrush (preferably a baby with soft bristles)
3. Carefully clean the speaker grid with circular movements
4. Use compressed air (cylinder) to blow dust out of the holes
5. Wipe the area around the speaker with an alcohol napkin

If the sound does not improve after cleaning, check:

• 🔧 Integrity of the plume dynamics - when falling, it can move away from the motherboard
• 🔊 The state of the membrane speaker - when worn, the sound becomes hoarse
• 📱 Density of the protective glass adjoining – if it presses on the body, it can block sound

To diagnose the hardware part, you can use the speaker test:

1. Enter the code ##0673## or #0289#####
2. Choose Audio Test
3. Test the Receiver (Conversational Speaker)
4. Compare the volume to the reference sound (can be found on YouTube)

Alternative methods of communication

If you can not increase the volume of the conversational speaker, consider alternative ways of making calls:

• 🎧 Bluetooth Headset – Even Budget Models Provide Better Audibility
• 🔊 Hands-free mode – activated by a button during a call (but the interlocutor will hear an echo)
• 📱 VoIP apps – WhatsApp, Telegram, Viber often have better sound processing
• 🔗 Call forwarding – set up redirects to another phone with the best speaker

The Redmi Note 7 is particularly effective with a Bluetooth headset. Current models (e.g. Xiaomi Mi True Wireless Earphones or Redmi AirDots) automatically turn up the volume in noisy environments and filter out ambient sounds.

1. Turn on Bluetooth in the settings
2. Activate the pairing mode on the headset
3. Select the device in the list of available
4. The next time you call, the sound will automatically go to the headset.

If you make frequent calls in noisy places, consider buying a headset with cVc 8.0 (noise reduction) that will drastically solve the problem of hearing without risking damaging the phone's speaker.

Extreme measures: firmware modification

For advanced users willing to take risks, there is an option to modify system files, a method that requires an unlocked bootloader and root rights, but gives maximum control over sound.

The most effective ways to:

• 🔧 Editing mixer_paths.xml — The file is responsible for routing and amplifying sound
• 📱 Custom core installation – some cores (e.g. FrancoKernel) have improved audio drivers
• 🔊 Modified audio_effects.conf — It allows you to fine-tune the equalizer.

Example of editing mixer_paths.xml:

<path name="handset-mic">


<ctl name="RX1 Digital Volume" value="84" />




<ctl name="RX2 Digital Volume" value="84" />




</path>

Value can be increased to 90-95, but this requires testing, as the reaction may vary on different firmwares.

⚠️ Warning: Incorrect editing of system files can result in bootloop (cyclic reboot) or complete loss of sound.Always backup the original files before making changes.

💡

Modifying the firmware gives the best results, but it voids the warranty and can cause the phone to run unstable, and use this method only if you've exhausted all other options.

FAQ: Frequent questions about Redmi Note 7 volume