Modern wireless headsets from the Chinese tech giant have become the benchmark for affordable sound, but initial setup is sometimes difficult for users. The process of installing Xiaomi headphone pairing can vary depending on the particular model, whether it is the popular Mi True Wireless Earbuds, Redmi Buds or full-size Mi Headphones. Understanding the basic principles of the Bluetooth protocol and mating algorithms will help avoid most errors at the start.
In this article, we will take a look at all the steps of connecting a gadget to Android and iOS smartphones, learn about the hidden features of the Mi Home and Xiaomi Earbuds app that are not available with a standard connection, and discuss the frequent errors when the phone simply does not see the device, and how to fix them without contacting the service center.
Preparation of the device and charge check
Before any manipulation of wireless devices, it is critical to ensure that the battery is sufficiently charged. If the case or the headphones themselves are discharged to zero, the Bluetooth module may not work stable or start detection mode at all. It is recommended to place the headset in the charging case and connect it to the network for at least 15-20 minutes before the first attempt to pair.
It’s important to understand the difference between on and pairing. Many users mistakenly believe that simply removing the headphones from the case automatically puts them into visibility mode for all devices. In fact, initial setup often requires a forced search mode, especially if the headphones were previously connected to another smartphone.
💡
If the indicator on the case flashes white when you remove the headphones, the device is ready to search. If it burns red, charge the gadget first.
Check the cleanliness of the contacts. The metal contacts inside the case and on the headphones themselves should not have protective film (often found on new devices) or contamination. Oxidation or isolation of the contacts can prevent the left and right channel from synchronizing correctly, making it impossible for them to work together.
Activation of the coupling mode on different models
The algorithm for putting the headphones into detection mode varies significantly depending on the form factor and the series of the device. For most models in the Mi True Wireless and Redmi Buds series, both earbuds must be removed from the charging case, and then they must automatically go to standby mode, which is usually signaled by a fast flashing white indicator.
If automatic start-up does not occur, you need to use a mechanical pairing button, it can be located on the outside of the case or inside between the headphone compartments. Pressing and holding this button for 3-5 seconds before changing the pattern of flashing the indicator (usually intermittent blinking) forcefully activates visibility mode.
- 🔘 For Mi AirDots models: Remove the headphones, they should automatically enter search mode.
- 🔘 For Mi True Wireless Earphones 2: open the case cover without removing the headphones and press the functional button on the end.
- 🔘 For full-size Mi Headphones Comfort: press the power button on 5-7 seconds until the indicator starts flashing blue.
What to do if the indicator does not light up?
Special attention should be paid to touch-controlled models. Sometimes, to activate the pairing mode, you need to touch the touch zone on both headphones at the same time or perform a certain sequence of taps. The exact combination for your model is best specified in the official user manual or on the manufacturer's website.
Matching with Android smartphones
Xiaomi, Redmi and POCO are the most fortunate smartphone owners: MIUI and HyperOS support fast-connection protocol. Simply unlock the phone screen and bring an open case with headphones (or full-size headphones included) to the smartphone screen. An animated window should appear on the display offering to connect the device.
☑️ Algorithm of connection to Android
If the automatic window doesn’t show up, you need to go to Bluetooth settings manually. Go to Settings → Bluetooth and make sure the switch is active. click “Search for New Devices” or just wait a few seconds until your headset name appears in the “Available Devices” list.
Click on the device name in the list. The system may request a pairing confirmation or input. PIN-In 99% of cases, Xiaomi headphones are standard: 0000. Once successfully connected, the device status will be marked "Connected" and the battery icon.
⚠️ Note: If two identical names appear on the list of available devices (e.g., two “Mi True Wireless” devices) EBAS» or "L" and "R"), which means desynchronizing the left and right earbuds. Don't connect to them separately, you need to perform a full reset (instruction below).
Connection to iPhone and iPad (iOS)
Apple’s ecosystem doesn’t support Xiaomi’s proprietary fast pairing protocols, so the process looks classic. Open Bluetooth settings on your iPhone or iPad. Make sure the headphones are in active search mode (the indicator flashes quickly).
In the list of devices, find the appropriate name. For AirDots or Redmi Buds models, the name may appear as Mi True Wireless. EBAS Basic_R Or just Mi True Wireless. EBAS Click on the name and after a short pause the device will be connected.
💡
On iOS, Xiaomi headphone functionality may be limited to basic audio playback, as the advanced settings app is often unavailable or works with limitations.
It’s worth noting that after the first successful iPhone connection, the headphones will automatically reconnect when removed from the case if Bluetooth is on on the phone. However, if you previously connected them to an Android smartphone, the iPhone may not see them until you turn off Bluetooth on the previous device or forget the device in its settings.
Use of Xiaomi Earbuds and Mi Home
To unlock the full potential of the headset, it is highly recommended to install a specialized application: for new models (released after 2020), the Xiaomi Earbuds app is used, for older ones, Mi Home, you can download them from Google Play or the App Store.
The app not only allows you to track the charge of each headphone separately, but also adjust the equalizer, change the purpose of touch touch touches and search for current firmware updates. Updating firmware through the app is the best way to eliminate micro-lags and improve connection stability.
| Function | Xiaomi Earbuds | Mi Home | Standard Bluetooth |
|---|---|---|---|
| Equalizer setting | There is. | Aye (depending on model) | No. |
| Headphone search | Got it (map) | No. | No. |
| Update of the PO | Automatically. | Manually. | Impossible. |
| Low-delay regime | On/off | On/off | No. |
The app also has a "Hearphone Search" feature that makes the headset make a loud sound, which is extremely useful if you lose one of the headphones in the room, and you can check battery wear and calibrate the charge display if necessary.
Problem Solving: Headphones are not connected
It's not uncommon for a phone to see a device but fail to complete pairing, or even not to detect headphones at all. First, try Forget the Device in your phone's Bluetooth settings, turn off Bluetooth, restart your smartphone, and try again.
A common cause of problems is the accumulated data in the Bluetooth cache on Android. You can try to clear the cache of the system service. To do this, go to Settings → Apps → Show system processes → Bluetooth → Memory → Clear the cache. This will not delete your stored devices, but update the network settings of the module.
⚠️ Note: When you reset your headphones, all previously stored devices will be deleted from their memory. You will have to re-connect them with all your gadgets (phone, tablet, laptop).
If nothing works, do a full reset of the headphones, usually by removing the headphones from the case and holding the touch zones on both headphones simultaneously for a long time (10-15 seconds), or holding the button on the case until the indicator blinks several times in red or orange.