How to set a customized tune on the contact in Xiaomi Poco M3: a detailed guide

Xiaomi Poco M3 allows you to customize unique tunes for each contact so you know who is calling without even looking at the screen. This feature is especially useful for important calls — from loved ones, colleagues or customers. However, not all users know how to properly set up a personal ringtone, especially if it is a specific contact, not a standard tune for everyone.

In this article, we will discuss in detail how to set a melody to contact Poco. M3, including selecting an audio file from the device's memory, using standard ringtones and solving possible problems. You will also learn what formats are supported, how to crop the track and why settings are sometimes not applied. MIUI 12/13/14 Newer versions installed on Poco M3.

Why individual tunes are convenient

Personal contact ringtones are not just a “chip”, but a practical tool:

• 🔔 Quick caller identification – you don’t need to take your phone out of your pocket to see the name on the screen.
• 🎵 Emotional connection – a melody can be associated with a person (for example, a friend’s favorite song).
• 🚨 Prioritizing calls – a loud or unusual signal for important contacts (boss, family).
• 📵 Quiet mode for spam – you can assign a silent signal for unwanted numbers.

On Poco M3, this feature is implemented through the standard Contacts app, but there are nuances: for example, not all audio files are supported, and some settings can be reset after the MIUI update.

Preparation: What audio formats support Poco M3

Before you set the melody, make sure your audio file meets the system requirements. Xiaomi Poco M3 supports the following formats for ringtones:

The best option is.mp3 or.m4a files that last up to 30 seconds, and if your track is longer, you can clip it right on your phone using the Music app or third-party tools like Ringtone Maker.

⚠️ Note: Files with a bit rate above 320 kbit / s can be played with distortion. 128-192 kbit / s is enough for ringtones.

Method 1: Installation of a melody through the “Contacts” application

This is the simplest method, and it doesn't require any additional programs.

1. Open the Contacts app (a icon with a person's silhouette).
2. Find the right contact and tap it to open the card.
3. In the upper right corner, press three dots (⋮) and select Set the ringtone.
4. In the menu that opens, select one of the options: 🎶 Standard ringtones – pre-installed tunes from Xiaomi. 📁 Local audio files – tracks from the phone’s memory. 🔍 Search – if you have a lot of files.

OK.

Save.

If the contact is not in the phone book, add it first: press + in the Contacts app, fill in the data and save it. Only then you can assign a custom ringtone.

Contact saved in the phone book|Audio file in supported format|The file is copied to the phone's memory (not to the phone's memory). SD-map)|The length of the track does not exceed 30 seconds.-->

Method 2: Using a file manager to select a tune

If the desired audio file does not appear in the list when selecting a ringtone, you can assign it manually through Files (or other file manager).

1. Open the Files app (Folder icon).
2. Go to the folder where your audio file is stored (such as Music or Ringtones).
3. Long click on the file → select Set as → Contact Rington.
4. In the contact list, select who you want to assign this tune to.

If the option is Uninstalled, copy the file to the Ringtones folder (create it in the root directory if it is not available), and then the melody will appear in the standard list of ringtones.

💡

Create a Ringtones folder in the root directory of internal memory – so all audio files in it will automatically be available for selection as ringtones.

Problem Solving: Why the Melody is Not Set

Sometimes users are faced with the fact that the individual ringtone is not applied or reset. Let's consider the typical causes and ways to eliminate them:

• 🔕 File is not supported - check the format (see table above.mp3 bitrate 192 kbit/s.
• 📱 Contact synced with Google - sometimes settings are reset when synced. Solution: disable contact sync in Settings → Accounts. → Google.
• 🔄 Resetting settings after update MIUI — After the system update, the individual ringtones can fly off.
• 📵 File on SD-card - the system may not see the ringtones stored on the external drive.

⚠️ Note: If you are using doubles SIM-POCO M3, Individual melodies can only work for the main SIM. To assign a ringtone to the second SIM, repeat the procedure by selecting the appropriate profile in the call settings.

Additional settings: vibration and LED-indication

On Poco. M3 You can not only assign a unique melody, but also adjust the vibration and color. LED-It adds another layer of personalization:

1. Open the contact card → ⋮ → Set the ringtone.
2. At the bottom of the screen, select Vibration and assign one of the preset patterns (e.g., Heartbeat or Double Impulse).
3. For LED-Indications go to Settings → Notifications → Light indicator and select color for calls.

On Poco. M3 LED-The indication works only when the screen is locked and if the option “Notifications highlighting” is enabled in the settings».

Third-party applications for enhanced capabilities

If standard MIUI features aren’t enough, you can use third-party apps from Google Play:

• 🎛️ Zedge – a huge library of ringtones and notifications with the ability to pre-listen.
• 🔊 Ringtone Maker – a tool for cropping and editing audio files directly on your phone.
• 📱 Contact Ringtones – allows you to assign different tunes for calls and SMS contact.

When using third-party apps, pay attention to permissions: some ask for access to contacts and storage. revoke unnecessary permissions in Settings → Apps → Permissions.

💡

Standard MIUI tools are enough for most users, but third-party apps will help if you need unique tunes or advanced vibration settings.

FAQ: Frequent questions about tune-ups on the Poco M3