Vibration when pressing the keys on Xiaomi Redmi Note: how to remove forever

The keyboard vibration on Xiaomi Redmi Note smartphones is not something everyone likes. For some users, tactile response improves typing accuracy, for others it becomes a source of irritation: distracts from work, drains the battery, and can even interfere with playing or watching videos. Fortunately, the manufacturer has provided several ways to turn off the vibration – both through standard settings and using hidden tools.

In this article, we will discuss all possible methods for eliminating vibration on the Redmi Note 8/9/10/11/12 and other models of the series, including software and hardware nuances. You will learn how to turn off response for the system keyboard, third-party applications (such as Gboard or SwiftKey), and what to do if the vibration returns after the MIUI update. Particular attention will be paid to the hidden settings of the engineering menu that allow you to turn off vibration at the driver level – this is important for users with custom firmware or informal builds.

Before you start settings, make sure that the problem is not related to a hardware defect. If the vibration is accompanied by extraneous sounds (cracking, creaking) or the smartphone has previously fallen / been in repair, it may be damaged vibrator motor. In this case, only the service center will help. In all other cases, follow the instructions below.

1. disable vibration in the settings of the MIUI keyboard

The easiest way to remove vibration is through the system keyboard menu, which works on all Xiaomi Redmi Note smartphones with MIUI 12-14 firmware (including global and Chinese versions).

1. Open any application where the keyboard appears (such as Messages or Notes).
2. Touch the gear badge (⚙️) in the top row of the keyboard to open its settings.
3. Go to the section Settings of the keyboard → Sound and vibration.
4. Turn off the switch next to Vibration when pressed (or Tactile Response in newer versions of MIUI).

If you have a third-party keyboard installed (such as Gboard), the path will be different:

• 📱 For Gboard: Settings → System system → Language and input → Virtual keyboard → Gboard → Settings → Pressed sound.
• 🔤 For SwiftKey: Keyboard settings → Sound and vibration → Press vibration.

After you turn off, check the keyboard in different applications. If the vibration is gone, the problem is solved. If not, move on to the next way.

2. disable vibration through system sound settings

Sometimes the keys are not only controlled by the keyboard settings, but also by the general parameters of the system. MIUI has a separate section for managing the tactile response.

1. Go to Settings. → Sound and vibration.
2. Scroll down to the Vibration block.
3. Turn off options: Vibration when pressed (if any) Tactile response Vibration when typing

On some Redmi Note models (like the Note 10 Pro or Note 11), these items may be hidden under the optional menu. If you don't see them right away, try:

• 🔍 Press three points (⋮) in the upper right corner and select additional settings.
• 📱 Reboot the smartphone – sometimes the settings are applied only after the reboot.

💡

If you still feel the vibration after turning off, check the settings of specific applications (such as WhatsApp or Telegram) – they may have their own tactile response settings.

3.Use of the engineering menu (#4636##)

If standard methods fail, vibration can be turned off at the system level through an engineering menu, which is suitable for advanced users, since improper actions can disrupt the smartphone.

1. Open the Phone app and enter the combination: ##4636##.
2. In the menu that opens, select Hardware Testing (or Hardware Testing).
3. Find the Vibrator Test section (may be called the Vibromotor).
4. Press Stop Vibration or Turn off the vibration.

On some MIUI firmware, the engineering menu may be blocked.

• 🔧 Try an alternative combination: ##36446337## (for hardware testing).
• 📱 If the menu doesn't open, maybe the manufacturer has disabled the access. ADB (see next section).

4. Disable vibration through ADB (for advanced users)

If the vibration is not turned off through the standard settings, you can use Android Debug Bridge (ADB). This method requires connecting the smartphone to the computer, but it is guaranteed to work on any device running Android.

1. Download and install ADB Tools on your computer.
2. On your smartphone, turn on Developer Mode: Go to Settings → About Phone. 7 times click on the MIUI Version until a notification appears You became a developer.

Settings → Additional → For Developers

USB debugging

adb shell settings put system haptic_feedback_enabled 0

Reset the device.

If the keyboard vibration is controlled separately from the system keyboard, use the additional command:

adb shell settings put system vibration_intensity 0

To return the vibration, replace the 0 with 1 in the commands above.

Install drivers for Xiaomi on PC|Enable developer mode on phone |Activate debugging on USB| Download ADB Tools from the official website |Connect the phone with the original cable-->

5.Problems after MIUI Update: Why the Vibration Returns

Many Redmi Note users are faced with the fact that after updating the firmware, the vibration of the keys turns on again, which is due to the fact that MIUI resets some of the default settings.

• 📲 Backup your settings: save configuration via Settings before updating → Additionally. → Backup and reset.
• 🔄 Reverse to the old version: if the vibration appeared after the update, try to roll back through Fastboot (instructions are on the forums). 4PDA).
• 🛠️ Use Magisk modules: For rooted devices, there are modules like Disable Haptic Feedback that block vibration at the core level.

If you don't want to roll back or install custom firmware, the only reliable way to do this is to check your settings regularly after each update, and you can also turn off automatic MIUI updates:

1. Go to Settings → About the phone → System update.
2. Press three points (⋮) and select the Update Settings.
3. Turn off the option of Automatic download via Wi-Fi.

💡

MIUI updates often reset user vibration settings. If the problem recurs, consider turning off automatic updates or using Magisk modules to force the tactile response to be disabled.

6. Hardware causes of vibration: when to carry in the service

If the vibration when pressing the keys is accompanied by extraneous sounds (cracking, squeaking) or the smartphone has previously been subjected to mechanical stresses (falls, bumps), the problem may be hardware. In this case, software methods will not help - you will need a diagnosis in the service center.

Signs of hardware malfunction of the vibromotor:

The cost of repairing the vibromotor in Xiaomi Redmi Note usually does not exceed 1000-1500 rubles, but if the problem is in the motherboard, the price can rise to 3000-5000 rubles.

• 🔋 Does vibration work in other scenarios (calls, notifications).
• 📱 Have you recently had a fall or a swelling.
• 🔧 Have you installed unofficial firmware or modules.

💡

If the vibration occurred after the battery or display was replaced, it is likely that the wizard damaged the plume of the vibrator motor, in which case the repair must be free of charge under warranty (if it is valid).

7. Alternative solutions: third-party applications and firmware

If none of the above methods worked, you can use third-party tools.

• 📱 Vibration Tuner: allows you to fine-tune the vibration intensity (up to a complete shutdown). ROOT.
• 🔧 Disable Haptic Feedback: Completely blocks vibration at the system level.

Before using third-party solutions, consider:

⚠️ Warning: Installing Magisk or custom firmware will void warranty and may cause your smartphone to run unstable!

If you are not willing to take risks, try resetting to factory settings:

1. Go to Settings → Additional → Backup and Reset.
2. Select Settings Reset.
3. Confirm the action (the data will be deleted!).

After reset, the key vibration will be turned off by default on most Redmi Note models (except for Chinese firmware versions).

Frequently asked questions