Modern wireless headphones have become an integral part of everyday life, and Xiaomi models are leading the market due to their affordable price and good sound quality. However, users often face difficulties in initially setting up a device, especially when it is necessary to combine two independent modules into a single stereo system.
In this article, we will discuss in detail how Xiaomi Airdots headphones pair with various Android and iOS smartphones. You will learn about the intricacies of the Bluetooth protocol, the features of indicators and methods of forced channel synchronization if the standard method did not work. Proper configuration from the beginning guarantees stable operation of the device in the future.
Many owners mistakenly believe that it is enough to simply turn on Bluetooth on the phone, but for full-fledged work. TWS-The True Wireless Stereo requires you to perform a preliminary linking procedure between your ears, and only after the left and right modules find each other will they become visible to your smartphone as a single device. Ignoring this stage often leads to sound dissynchronization or only one headphone.
Preparation for first activation and activation of the pairing mode
Before you try to find a device in the list of available Bluetooth networks, you need to make sure that the headphones are fully charged and ready to go. Remove both earphones from the charging case at the same time. At this point they should automatically turn on, which will signal LED lights. Usually flashing in red indicates an active pairing mode.
If you use the headphones for the first time or after a full reset, they may not go into pairing mode automatically. In this case, you will need manual activation. This requires pinching the touch areas on both earphones and holding them for about 5-7 seconds until the indicators start flashing white or red-blue (depending on the model), which means that Xiaomi Airdots is ready to connect.
It is important to understand the difference between the modes of operation of indicators. Fast flashing in white usually indicates an attempt to connect two headphones to each other, not to the phone. Slow blinking or constant burning can mean a successful connection to the smartphone or low battery charge. Careful observation of the light indication helps to diagnose the problem early.
⚠️ Warning: If the lights are red and don't flash, it's a signal of critically low charge.Do not attempt pairing until you charge the case and headphones to 100%, as unstable voltage can interrupt the firmware process of the Bluetooth module.
Make sure your smartphone has Bluetooth enabled and is visible to other devices. → Bluetooth and activate the switch. It is also recommended to clear the list of previously connected devices, if you have previously tried to connect these headphones, but without success. MAC-address.
Algorithm of connection to Android and iOS devices
The process of finding a device on smartphones with different operating systems is almost identical, but there are small nuances in the menu interface. After you have put the headphones in pairing mode (fast flashing of the indicator), open the Bluetooth settings on your mobile device. Press the "Look for new devices" button or just wait for the list update.
The list of available gadgets should show the name of your model, for example, Mi True Wireless EBs Basic or Redmi Airdots. Click on this name. In some cases, the system may request confirmation of pairing or introduction PIN-The standard code for Xiaomi devices is usually 0000, although modern models often do without this step.
Once the connection is successful, the headphone assistant (if supported by the model) will report status, and you can hear the phrase "Connected" or "Connected" in English or Chinese, and from now on, the sound should be broadcast in both ears, and if the sound is only in one earpiece, then the stereo is not formed correctly, and reset procedure will be required.
- 📱 For Android: Make sure Bluetooth resolutions include access to contacts and call log if you plan to use the headset for calls.
- 🍎 For iOS: When connecting to an iPhone, you may need to confirm your device’s trust, click “Connect” in the pop-up window.
- 🔋 Energy saving: On some Xiaomi smartphones (MIUI) Aggressive battery settings can block Bluetooth background processes, add headphones to exceptions.
It’s worth noting that connection speeds depend on the Bluetooth version of the module in your phone. Devices with Bluetooth 5.0 and above establish communication almost instantly, whereas older versions (4.0 and below) may require more time to shake hands with protocols. If the connection takes more than 30 seconds, try rebooting the smartphone.
☑️ Checking before connection
Dissynchronization problems: when only one ear works
One of the most common problems of budget owners TWS-The problem with headphones is that one ear stops working or works independently of the other, and this happens when the left-right modules are disconnected, and the phone sees two different devices, or only one of them. This problem can only be solved through a full reset (Hard Reset).
To perform the reset, you need to place both headphones back in the charging case. Make sure they fit tightly to the contacts and the charging indicators catch fire. Then, without removing the headphones from the case (or removing them, depending on the particular model, but more often need to take them out), press the touchpads on both headphones at the same time. Hold them for 10-15 seconds until the indicators flash red several times and go out.
Once the lights are gone, release the sensors. Now press and hold them again until the flashing process begins, as reported by the rapid flashing of the indicators, a process that can take up to 20 seconds. Once the procedure is complete, the headphones must automatically go into search mode for each other, and then into search mode for the phone.
Why are settings being reset?
It is important to reset away from sources of strong radio interference, such as Wi-Fi routers or microwave ovens. Also make sure that the phone is turned off Bluetooth at this point so that the device does not try to automatically connect during the flashing process. After the reset, be sure to delete the old record of the headphones in the phone's Bluetooth menu before you reconnect.
Table of indication and connection statuses
Understanding LED lights is key to self-diagnosing malfunctions. Different Xiaomi Airdots, Redmi Buds and Mi True Wireless models may use slightly different color schemes, but the overall logic remains the same across the ecosystem.
| Color of indicator | Blinking mode | Importance of status | User action |
|---|---|---|---|
| Red. | It's always burning. | Charging's coming. | Leave in the case until full charge |
| Red. | Slowly blinking | Low battery charge | I need you to charge. |
| White | Blinking fast. | The mode of pairing (Pairing) | Search for the device in the Bluetooth menu |
| White | Slowly blinking | Successful connection | We can use it. |
| Red and White. | Alternately. | Conjugation error/Reset | Perform a re-discharge procedure |
Note that in some versions, such as the Airdots S or Redmi Airdots 2, the color of the display can be changed to orange or blue. The principle remains the same: active blinking means readiness for connection, and even glow means stable operation. If you see chaotic blinking, this may indicate a hardware malfunction.
💡
If the indicator of one of the headphones does not light up at all, wipe the contacts on the earphone itself and inside the case with a dry cotton swab. Contact oxidation is a common cause of a dead earphone.
Using the Xiaomi Earbuds app for advanced customization
For Xiaomi and Redmi smartphone owners, as well as users of other Android devices, there is a specialized application Xiaomi Earbuds (formerly known as Mi True Wireless) that allows you not only to control the charge level of each headphone separately, but also to adjust touch control, which is not available through the standard Bluetooth menu.
Download the app from the official Google Play store or Mi GetApps. Once installed, start the program and follow the instructions on the screen. The app will automatically detect the connected headphones and prompt them to update their firmware. Updating firmware is an important step, as manufacturers often release patches that improve connection stability and eliminate desynchronization.
Inside the app, you can reassign dual and triple touch functions, such as setting up a voice assistant call or switching tracks, and you can also find headphones that make them sound if you lose them indoors. For iOS, the functionality can be limited to basic charge monitoring.
- 🎮 Game mode: You can activate the low-latency mode in the application, which is critical for mobile shooters and rhythm games.
- 🔊 Equalizer: Some models support audio profile settings directly in the app.
- 📍 Search: “Find My Earbuds” will help locate the device by sound signal.
Don't ignore the update notifications. The software is responsible for noise reduction algorithms (if any) and the Bluetooth antenna. An outdated version of the software may be why the headphones are poorly connected or discharge quickly.
Frequent Questions and Troubleshooting (FAQ)
Why does the phone see two Xiaomi Airdots devices instead of one?
Can you use only one headphone Xiaomi Airdots?
The headphones are plugged in, but there's no sound.
How to Reset Your Headphones If Sensors Are Not Reacting?
💡
The main secret of stable operation of TWS-earphones is always to remove and put both headphones in the case at the same time so that they synchronize with each other before connecting to the phone.
Compliance with simple rules of operation and the correct algorithm of initial setting will allow you to enjoy quality sound without interruptions. If none of the software methods helped, perhaps the problem lies in the hardware, and it is worth contacting the service center.