Modern wireless headphones have become an essential accessory for millions of smartphone users. Xiaomi AirDots models are deservedly popular due to their affordable price and decent sound quality. However, after buying a device, many people face difficulties in the first setup. It often happens that gadgets do not see each other or the phone can not find the device on the list of available devices.
Synchronization requires consistent action to avoid channel desynchronization. Mono mode, where sound comes from only one earbud, is the most common problem for beginners. In this guide, we will break down all the intricacies of connection, forced pairing methods and ways to eliminate typical errors.
It's important to understand that the right initial setup affects the stability of the future. If you've just unpacked the box or reset the settings to factory, the algorithm of actions will be slightly different from the usual on. Follow the instructions carefully to enjoy wireless freedom without unnecessary nerves.
Preparation of devices for first switching on
Before you try to connect AirDots to your smartphone, make sure they are fully operational. Charge the case and the headphones themselves to full level, as at low charge, the Bluetooth module can work unstable or not turn on at all.
Note the indicators: when you retrieve them, they should light up, signaling the start of work. If the indicators do not respond, check if the protective films are removed from the contacts on the headphones themselves (this is a common problem with new instances). Also make sure that your smartphone is on the wireless module.
⚠️ Warning: Do not try to charge your headphones if they are too hot after active use or exposure to the sun.
For stable operation, it is recommended to clear the list of previously paired devices in the phone settings if you have already tried to connect before, this will eliminate MAC address conflicts and allow the system to create a new, clean connection with the correct codec parameters.
💡
Before the first use, wipe the contact areas on the headphones and inside the case with a dry lilaless napkin - the oxidation of the contacts can prevent charging and correct determination of the device.
Step-by-step instructions for pairing with Android and iOS
The basic connection process is the same for most operating systems, but it has its own nuances: first, you need to activate the search mode on the headphones themselves, to do this, taking them out of the case, press the touch panels on both devices simultaneously and hold for about 5-7 seconds.
The indicators should start flashing red and white (or blue, depending on the firmware version) colors, which means that the pairing process between the left and right channel is started, and once one of the headphones starts flashing slowly (usually once every few seconds), and the second goes out, they are connected to each other.
☑️ Connection algorithm
Now open your Bluetooth settings on your gadget and start searching for new devices. Basic_R Or just AirDots. Click on the name to connect. Once you've successfully synchronized, you hear a distinctive beep.
Solving the problem of channel desynchronization
It's a common situation where only one headphone is running, and it's because of a TWS (True Wireless Stereo) protocol failure, where devices lose communication with each other and connect to the phone as independent mono headsets, and to fix that, you have to do a complete reset.
Remove the headphone profile from the Bluetooth list on your phone ("Forget the device"). Place both headphones back in the case and close the lid for 10 seconds. Then remove them and simultaneously press and hold the touch areas until the indicators flash 3 times red and go out.
Why is there a desynchronization?
After reset, repeat the initial pairing procedure described in the previous section. It is important to perform all actions quickly and consistently, preventing the headphones from going to sleep. If the problem persists, check if the proximity sensors are contaminated.
💡
Full reset (Hard Reset) eliminates 95% of the software connection errors and returns the headphones to the factory configuration state.
Features of connecting to Windows and macOS
Connecting to computers and laptops requires considering the features of desktop operating systems. Unlike smartphones, PCs do not always automatically reconnect when extracted from a case. You will have to manually choose a sound output device or use third-party utilities each time.
In Windows 10 and 11, go to Settings → Devices → Bluetooth and other devices. Make sure the Bluetooth slider is activated. Click Add Bluetooth or other device and select the first item. The computer will start searching for audio devices.
On macOS, the process is similar: open System Settings → Bluetooth. If the headphones are in search mode (flashing), they will appear in the list at the bottom. Click "Connect." Note that calls may require a profile switch in the audio settings.
| Parameter | Windows 10/11 | macOS | Android/iOS |
|---|---|---|---|
| Automatic connection | Often requires manual selection. | Requires confirmation. | Instantly. |
| Codecs of sound | SBC, AAC (depending on drivers) | AAC, SBC | AAC, aptX (depending on model) |
| Volume control | Through the keyboard/menu | Sensory management | |
| Stability of communications | Medium (depending on adapter) | Tall. | Tall. |
It's worth noting that the built-in Bluetooth adapters in older laptops may not support modern energy saving standards, which leads to a quick discharge of headphones even in simple cases. USB-adapter with Bluetooth 5.0 support.
Smartphone | Laptop |Planche |Television
Setting up sensory control and functions
Xiaomi AirDots models have a basic set of touch commands that work without installing additional applications. However, the functionality can be limited by the manufacturer. Standard single touch is responsible for playback / pause, and double touch is responsible for calling the voice assistant or the next track.
For more features, such as equalizer setup, firmware updates or game delay changes, it is recommended to install the official Mi Home or Xiaomi Earbuds app. In the app, you can see the exact charge of each headphone and case as a percentage.
⚠️ Attention: Sensors are sensitive to moisture and fat pollution. If commands are not met, wipe the surface of the earpiece with a dry cloth - the finger must touch a clean surface to record the touch.
Some users have noted that triple taping causes the previous track, but it depends on firmware's version. If the standard commands don't work, try resetting the above. Flashing through the app often solves problems with the "deaf" areas of the sensor.
Hidden features of the Mi Home app
Technical specifications and frequent questions
Understanding the technical limitations helps avoid frustration: Bluetooth is about 10 meters in range in open space, but walls and metal structures reduce that distance significantly.The Bluetooth 5.0 version provides a stable signal and low power consumption.
The operating time from one charge is usually 4-5 hours, and the case allows you to charge the headphones 2-3 times. It is important not to leave the discharged headphones in the case for a long time (months), as this can lead to a deep discharge and the inability to use them further.
- 🎧 Type: Intrachannel, fully wireless
- 🔋 Case capacity: 300-400 mAh (depending on the audit)
- 🛡️ Protection: IPX4 (sweat-proof)
- 🎤 Microphone: Built-in with noise cancellation (CVC)
If you plan to use headphones for sports, make sure they sit tight in your ears. Often come with interchangeable earbuds of different sizes. Size is important not only for comfort, but also for the quality of the bass component sound.