Users of budget acoustics often face a situation where the right and left channels stop synchronizing, turning into two independent devices. Xiaomi AirDots 2 is no exception to the rule, as Bluetooth connection algorithms sometimes fail after discharging or losing communication. TWS-technology, where one headphone acts as a master, and the second – a slave device.
In most cases, the problem is not hardware failure, but the desynchronization of the software module within the case, so you need to do a sequential reset and re-initiate the pairing process, and ignoring the correct course of action can lead to the gadgets connecting to the phone separately, making listening to stereo content impossible.
This guide will help you eliminate the desynchronization and return the full sound. We will look at the standard methods of connection, the procedure of hard resets and solving specific errors that are characteristic of the second version of the popular “plugs” from the Chinese giant.
The principle of TWS operation and preparation for pairing
True Wireless Stereo technology means that the smartphone sees only one device and it already broadcasts sound to the second channel. In AirDots 2, the right earpiece usually takes the role of the wizard, although there are exceptions after flashing modules, and understanding this hierarchy is necessary for the correct procedure for restoring communication between channels.
Before you start any manipulations, make sure that the batteries of both devices are charged at least 30-40%. Low battery power can lead to unstable operation of the Bluetooth module, which will interrupt the pairing process halfway. It is also recommended to clear the list of previously connected devices in the phone settings, removing from there all records associated with the Mi True Wireless EBs Basic or AirDots.
If you've previously connected your headset to other gadgets, they can automatically try to connect in the background, interfering with the current setup. Turn off Bluetooth on all nearby devices to eliminate frequency and protocol conflicts. Only after these preparatory steps are completed can you move on to active channel integration actions.
⚠️ Note: Do not try to connect the headphones if they are in charge mode inside the case. To adjust them, you need to remove them to activate the Bluetooth modules.
Standard procedure for first connection
For new devices or after a complete reset, the algorithm is simple enough, but requires precision. Remove both headphones from the charger case at the same time. The indicators should light up red to signal on, and then start flashing white, which means search mode.
At this point, the right and left channels must find each other automatically, usually in 5 to 15 seconds, and successful connection is confirmed by the fact that one of the indicators (most often the left) goes out or starts to flash less often, and on the right continues to burn or slowly flash white lights, waiting for connection to the phone.
Now, open the Bluetooth settings on your smartphone and click Device Search. The list of available networks should appear as Mi True Wireless EBs Basic 2 or AirDots 2. Press it to pair. If you see two identical records, then the synchronization between the channels has not occurred, and a reset procedure is required.
☑️ Checking connection readiness
Resetting methods (Hard Reset)
If the automatic connection does not occur, you need to force reset the memory modules. There are two main ways to do this for the Xiaomi AirDots 2 model. The first option is suitable if the headphones do not respond to commands at all.
During retention, the indicators will change colors: red, then red and white, and finally, if successfully reset, they can blink red three times or just turn off. Then put the devices back in the case, close the lid for 5-10 seconds and retrieve it, and this will trigger the initialization process.
The second method is used if the first one failed: Remove the headphones from the case, turn them off (holding the sensor 5 seconds before turning it off), and then turn it back on. Immediately after turning on, keep your fingers on, hold the sensors for another 15-20 seconds until a specific reset indication appears. This method often helps shake up the suspended software module.
What to do if the reset does not work?
Set up mono mode and switch channels
One of the features TWS-Xiaomi headsets are the ability to use one headphone independently of the other. To activate mono mode, just remove from the case only one device (usually the right one) and connect it to the phone.
If you need to switch to your left earphone, turn off Bluetooth on your phone first, or select "Forget the device." Put the right earphone in your case, remove the left one, and pair again. The system will remember the last channel used as a master device for the next time.
It's important to understand that in mono mode, control functions can be limited, for example, activating a voice assistant or switching tracks can only work on the main channel. To return to full stereo, simply put the active earphone in the case, close it, and then remove both devices simultaneously.
| Status of the indicator | Meaning | User action |
|---|---|---|
| Burning red. | Charging's coming. | Leave in the case until full charge |
| Blinks white | Interconnection mode | Search for the device in the Bluetooth menu |
| Burning white. | Successful connection | We can use it. |
| Blinks red. | Low charge or error | Charge or discharge |
💡
If you use only one headphone, try to alternate them so that the wear and dynamics of the battery are uniform. This will prolong the overall life of the headset.
Solving Common Connection Problems
A common problem is when the phone sees the device but writes "Connected" without transmitting sound, in which case you need to click on the gear or information icon next to the AirDots 2 name in Bluetooth settings and make sure that the ticks are ticked against "Media Audio" and "Phone Calls." Sometimes the A2DP profile is not activated automatically.
Another scenario is that there's only sound in one headphone, even though the phone is showing stereo, which is a sign that the channels are out of sync in the process of working. Put both devices in the case, close the lid, wait 10 seconds, and perform full pairing again, pre-deleting the device from the phone's memory.
If there is a constant delay of sound or interruption, check if the air is overloaded. Wi-Fi routers running at 2.4 GHz can interfere with Bluetooth. Try to switch the router to a 5 GHz channel or move away from the signal source. Also make sure that the phone does not turn on the power saving mode, which can aggressively limit the operation of wireless modules.
⚠️ Warning: If one of the headphones is silent after all the procedures, check the contact areas on the earphone and inside the case. Oxidation or contamination may interfere with charging, which prevents the device from turning on.
💡
In 90% of cases, problems with the connection of Xiaomi AirDots 2 are solved by completely removing the device from the memory of the phone and then hard reset both channels at the same time.