How to Connect Xiaomi Headphones: The Complete Guide

Modern wireless headsets from the Chinese manufacturer have become the benchmark for the value for money in the electronics market. Users often wonder how to perform primary pairing to avoid sound delays or connection breaks. The procedure can vary depending on the device model, whether it is the popular Redmi Buds or the more advanced Mi True Wireless Earphones.

The main data protocol is Bluetooth, which requires activation on the receiving gadget. Before you start manipulating, make sure that the headset battery is at least 30-40% charged, which is critical, since in the discharge mode the device may not be correctly detected by the smartphone operating system.

There are several connection scenarios: first turn on, reconnect with a known device or pair with gadgets from other brands, each with its own nuances of the indicator and touch panels, we will analyze all the steps in detail so that you can enjoy the music without unnecessary technical problems.

Preparation for first interface

The first step is always to physically prepare the device to work. If you've just unpacked the box, remove the protective films from the charging contacts on the headphones themselves. Often, manufacturers isolate the contacts so that the battery does not run out when stored in a warehouse.

Put both modules in the charge case and wait for the charge indicator to light up, which is a signal that the contact is established and the devices are ready to activate, without this step, the headset may be in deep sleep and not react to external influences.

• 🎧 Make sure the case is charged (flashes the indicator when opening).
• 🎧 Remove all shipping stickers from contacts.
• 🎧 Check the availability of charge on the smartphone for stable Bluetooth operation.

Some models, such as the Redmi AirDots, may require long-term sensor retention for the first turn on.If the indicators do not light up immediately after being removed from the case, try pinching the touch areas for 5-10 seconds.

⚠️ Note: If you are using the case for the first time, be sure to charge it from the network during the course of the day. 1-2 hours before the start of operation, as the factory charge is often minimal.

Standard procedure for Bluetooth connection

Connecting to Android smartphones, especially the MIUI or HyperOS shell, is as fast as possible thanks to protocol optimization. Open the case lid without removing the headphones themselves, or remove them - depending on the model, the pairing mode can be activated automatically.

Your smartphone should have a pop-up with animation and battery life, a proprietary feature called Fast Pair that makes life easier for ecosystem users. If the window appears, just click the "Plug" button to complete the procedure.

If the automatic window doesn't show up, go to manual search, go to your phone's Bluetooth settings and start scanning for new devices, and the list of available gadgets will be updated, and you will see the name of your model, for example, Mi True Wireless Earphones 2 Basic.

Click on the device name in the list. If you need confirmation, agree to the pairing request. Once you've successfully synchronized, you'll hear a voice message called "Connected" or a characteristic beep in the headphones themselves.

Setup with iPhone and iOS devices

Owners of Apple equipment can also use Xiaomi headsets, but the process here is devoid of proprietary MIUI animation. You will have to rely on the standard iOS interface. Make sure that the headphones are in pairing mode (usually a flashing white indicator).

Open Settings → Bluetooth on your iPhone. In the "Other Devices" section, find the appropriate name. Click on it to initialize the connection. The system can request permission to access contacts or notifications — this is standard procedure for headsets with a microphone.

For full functionality management, such as firmware updates or equalizer setup, it is recommended to install the Xiaomi Earbuds or Mi Home app from the App Store. Without this app, some features, such as changing the noise reduction mode, may not be available.

• 🍏 Download the Mi Home app from the App Store.
• 🍏 Add the device through a button"+" appendix.
• 🍏 Follow the instructions on the screen to adjust touch control.

⚠️ Note: On iOS, some features, such as displaying the exact percentage of charge of each headphone separately, may not work properly without installing third-party companion apps.

It’s worth noting that the AAC codec used by the iPhone provides good sound quality, but for maximum quality, it’s best to use aptX codecs if your headphone model and Android smartphone support them.

Use of Mi Home and Xiaomi Earbuds

To unlock the full potential of your wireless headphones, it is highly recommended to use specialized software, which allows you not only to update the firmware, but also to calibrate the sound to your preferences.

Once you install the app and add the device to the list, you can access the settings menu, where you can reassign actions when you double or triple touch the sensor, for example, configure a voice assistant call or switch tracks.

The app also has a headphone search feature, so if you lose one of the modules within your apartment, start the command in the app, and the earphone will start squeaking loudly, which will help you quickly find the device under the sofa or in clothes.

Remember to periodically check the section "About headphones" for updates. The new version of the software can significantly improve the quality of communication in the conditions of noisy air.

Interconnection mode and resetting settings

Sometimes, when the headphones are not visible to the phone or connect to only one ear, you need to perform a forced pairing or a complete reset. For most Redmi and Mi models, the procedure is similar.

Put both earbuds in the case and leave the lid open. Find the function button on the case case case (usually round and located on the end or inside between the seats). Press and hold it for 10-15 seconds.

The indicator on the case should start flashing white often, which means that the airing mode is activated and the device is now searchable by other gadgets. You can now find them in the phone's Bluetooth menu as a new device.

💡

If the button on the case is missing, try touching the sensors on both headphones at the same time and holding for 5 seconds until they turn off, and then repeat the action to turn on the pairing mode.

For a full reset that clears the memory of all previous connections, hold the button on the case for about 30 seconds until the indicator flashes red or goes out completely.

Solving Common Connection Problems

Even reliable technology has a problem, and if the sound is interrupted or the phone can't see the headset, the problem is often software conflict or battery discharge. First, try forgetting the device in the Bluetooth settings and re-create the pair.

Check if your headphones are connected to another device nearby, they can automatically connect to a tablet or laptop that was used earlier, intercepting the audio stream of the phone, and turn off Bluetooth on all unnecessary gadgets.

• 🔧 Reboot your smartphone to reset the Bluetooth stack.
• 🔧 Clear the Bluetooth app cache in Android settings.
• 🔧 Make sure that the distance between the devices is less than 10 meters.

If one earpiece is working and the other is silent, put both in the case, close the lid, wait 10 seconds and open again, often synchronizing the left and right channels.

⚠️ Warning: Metal objects, microwave ovens and running Wi-Fi routers can cause severe interference in the 2.4 GHz band, impairing connection quality.

Frequent Questions and Answers (FAQ)

💡

Proper resetting and re-pairing solve 90% of the problems with connecting and desynchronizing sound.