Modern users are increasingly abandoning wires in favor of compact and convenient TWS-However, despite the stated simplicity of Bluetooth technology, the initial pairing of devices from Xiaomi sometimes causes difficulties for beginners or when changing a smartphone. The sync process may vary depending on the accessory model and the version of the Android operating system installed on your phone.
In this article, we will discuss in detail the algorithm of actions necessary for successful pairing of Redmi headphones with a mobile device. You will learn about the intricacies of the detection mode, the features of connecting the left and right ear modules, and how to eliminate common connection errors that can occur during operation.
It’s worth noting that the stability of wireless audio depends on the correctness of the initial setup. Ignoring some steps, such as completely discharging the case or resetting previous Bluetooth settings, often leads to the gadget simply not seeing the phone or working only on one channel.
Preparation for the first connection of the device
Before you go directly to the smartphone settings, make sure your Xiaomi Redmi Buds or AirDots are ready to go. Often users forget to remove protective films from the charging contacts inside the case, which leaves the headphones unloaded and not turned on when the lid is opened. Make sure the indicators on the case or the headphones themselves respond to the placement inside the charging case.
An important step is to check the battery charge of the smartphone itself and accessories. If the power level is critically low, the phone's Bluetooth module may not work stable, which will interrupt the search process for devices. It is also recommended to keep the phone and headphones at a distance of no more than one meter from each other during the first synchronization.
⚠️ Note: If your headphones were previously connected to another phone, they may automatically try to connect to it when turned on.In this case, you need to temporarily turn off Bluetooth on the old device or remove the headphone profile from its memory so that the new smartphone can detect them.
To get started, make sure your smartphone screen is unlocked. Some versions of the MIUI or HyperOS shell require confirmation of a pairing request that appears on the lock screen but may be missed by the user. Enable geolocation in advance, as in modern versions of Android, this resolution is often required for the Bluetooth scanner to work properly.
Step-by-step instruction for pairing via Bluetooth
The main method of connecting is to activate the search mode on the smartphone and put the headphones in a pairing state. To do this, open the charge case cover without removing the headphones themselves, and find the functional button on the case. If there is no button, just remove both earphones from the case — they must automatically go to the waiting mode connection.
Then pick up your smartphone and go to the settings menu, and you need to find the wireless section, and the path may vary slightly depending on the firmware version, but the logic remains the same across all the Redmi and Xiaomi devices.
Follow the following steps in strict sequence:
- 📱 Open your smartphone settings and select Bluetooth.
- 🔍 Make sure the Bluetooth activation slider is switched to the On position and the phone will start searching for available devices.
- 🎧 Press and hold the touch zones on both headphones (or the button on the case) for a period of time. 3-5 seconds until the indicator starts flashing white.
- ✅ In the list of available devices on your phone screen, find the name of your model (e.g. Redmi Buds 3) and click on it to pair.
☑️ Checklist of successful connection
Once you've successfully connected, you'll hear a voice-approval "Connected" or a distinctive beep. If the system requests permission to access contacts and call logs, agree to be able to use the headphone microphone for conversations, otherwise the device will only work in media playback mode.
Use of Mi Fitness and Xiaomi Earbuds
To expand functionality and gain access to hidden settings, the manufacturer recommends using specialized software. Standard Android settings allow only basic management, while Xiaomi's proprietary utilities give full control over the equalizer, touch control and firmware updates.
There are two main apps that Xiaomi accessories owners may need. Newer models like Redmi Buds 4 and above, as well as Mi-branded devices, are most commonly used with the Mi Fitness app (formerly Zepp Life). Older models or specific series may require a separate Xiaomi Earbuds app available on Google Play.
The process of connecting through the application is as follows:
- Download and install the necessary application from the official Google Play store.
- Open the program and log in to your Mi Account.
- Click the “Add device” or “+” button in the main menu.
- The application will automatically scan the space and prompt you to add the found headphones.
- Confirm the pairing and wait for the data to synchronize.
Using the app is especially relevant if you want to set up control gestures. By default, touch control can be inactive or inconvenient. Through the program interface, you can assign double tap to skip the track, and long retention to activate the voice assistant.
Features of connecting different models of Redmi and AirDots
Xiaomi’s wireless headphone lineup is extremely extensive, and the process of activating them can be nuanced. For example, AirDots models often require a manual reset before first connecting, as they can remain in the previous owner’s pairing mode or have a left-right channel synchronization failure.
Active noise cancellation (ANC) models like the Redmi Buds 3 Pro have a more complex turn-on algorithm. When extracted from a case, they may not immediately go into search mode if the case battery has been completely exhausted, in which case it is recommended to place the headphones back in the case, close the lid and reopen it after 10 seconds.
Comparison of the characteristics of connecting popular models:
| Model | Activation method | Annex | Feature |
|---|---|---|---|
| AirDots 2 | Auto at the opening | Xiaomi Earbuds | Frequent left channel reset |
| Redmi Buds 3 | The button on the case | Mi Fitness | Fast pairing with MIUI |
| Redmi Buds 4 Pro | Auto + Button | Mi Fitness | Support for LDAC codec |
| Mi True Wireless 2 | The button on the case | Xiaomi Earbuds | Low latency in games |
Owners of game models should pay attention to the low latency mode. It often requires triple touch of the sensor or use a special menu in the application. Without the correct setting in the proprietary utility, the delay in sound in games can remain noticeable, which is critical for shooters and rhythm games.
Problem Solving: Headphones are not connected or only one is visible
One of the most common problems is when the phone sees only one headphone (usually the right one) and the left one is inactive, because the stereo pair is out of sync, and to fix this, you have to perform a full Hard Reset procedure before the factory settings.
To reset most Redmi Buds and AirDots models, follow the following steps: place both headphones in the case, open the lid and press the button on the case (or touch the sensors on both headphones simultaneously) and hold for 10-15 seconds. Indicators should blink several times, signaling a reset of Bluetooth settings.
⚠️ Warning: After resetting, be sure to remove the old device from the Bluetooth list on your phone (the “Forget the device” or “Cancel pairing” function). If this is not done, the phone will try to connect to the saved profile with the wrong encryption keys, and the connection will not be established again.
If the problem persists, check the list of paired devices in Bluetooth settings. Make sure there are no duplicates with similar names. Sometimes the phone has multiple "Mi True Wireless EBs Basic R" records left in its memory, which creates a conflict of addresses. Delete all the records associated with the headphones, restart the smartphone and try to reconnect them.
Management settings and additional functions
Once successfully connected, it’s time for fine-tuning. Android’s standard settings often limit the user to simple playback and pause. However, Xiaomi’s ecosystem allows for deeper integration of headphones into everyday use by customizing workflows.
In the Mi Fitness app, you can find the Headphone Settings section, where the following options are available:
- 🎚️ Equalizer: Choice (pop, rock, jazz) or manual frequency setting.
- 🔊 Volume: Some models allow you to adjust the volume directly by touching the headphone, bypassing the phone.
- 🗣️ Voice Assistant: Calling Google Assistant or Xiao AI long-press.
- 🔇 Noise suppression: mode switching ANC (Noise reduction, Transparency (transparency) and Off (off).
Special attention should be paid to the function "Finding headphones." If you lost one of the modules within the room (for example, it fell under the sofa), through the application you can make it make a piercing sound, which will greatly facilitate the search, this feature only works if the headphone is in the range of Bluetooth and is not lying inside a closed case.