Xiaomi’s modern wireless headsets have become the benchmark of affordable quality, offering a stable connection and great sound. However, the process of first familiarizing the device with the phone can be difficult for inexperienced users. Proper synchronization ensures not only audio transmission, but also the correct operation of the microphone, touch buttons and charge indication.
In this article, we will discuss in detail all the stages of connecting models of the Mi True Wireless Earbuds series to Android and iOS smartphones. You will learn about the intricacies of the Bluetooth protocol, methods for eliminating common errors and ways to optimize the work of the gadget. Ignoring the basic rules of pairing often leads to dissynchronization of channels or rapid discharge of batteries.
The process of communication installation takes no more than a minute if you follow the sequence of actions, we will consider both standard procedures and methods of forced resetting, which are necessary in difficult situations, and equipment readiness is a key factor in a successful start.
Preparation of headphones and smartphone for pairing
Before you try to connect devices, make sure they are ready to work, charge the case and the headphones themselves to a level of at least 20-30%, so that during the setup they do not suddenly turn off, low battery power can lead to unstable signal or interrupt the detection procedure.
Turn on Bluetooth on your mobile device. Go to Settings or use the Quick Access Panel (curtain) to do this. Make sure geolocation is enabled, as on modern versions of Android this requirement is necessary for correct scanning of peripherals.
⚠️ Note: If your headphones were previously connected to another phone, they may automatically try to connect to it.In this case, on the old device, you need to select the option “Forget the device” or temporarily disable Bluetooth.
Remove both earbuds from the charging case at the same time, the indicators on them should start flashing, signaling the transition to pairing mode, if only one earbud flashes, then the synchronization between the left and right channel is broken, and reset procedure will be required.
- 🔋 Check the charge level of the case and headphones before starting.
- 📱 Activate Bluetooth and geolocation on your smartphone.
- 👂 Remove both earphones from the case at the same time.
💡
For better signal stability, keep the case and phone no more than 10-15 cm apart during initial pairing.
Step-by-step instructions for connecting to Android
The Android operating system provides the deepest integration with the devices of the Xiaomi ecosystem. Once you remove the headphones and activate the search mode on the phone, the system will automatically detect a new device.
Click on the device name in the list. The screen may have a request for confirmation of pairing or input. PIN-The standard code is usually 0000 or 1234, but in most modern models, confirmation is automatic without entering digits.
☑️ Android Connection Algorithm
Once the connection is successful, you will hear a distinctive beep or voice notification in English or Chinese. The status in the Bluetooth menu will change to "Connected" with the charge level of each earphone separately. If this does not happen, try pressing the gear next to the device name and select "Reconnect".
For advanced functionality management, it is recommended to install the Xiaomi Earbuds app or Mi Wear from Google Play. These utilities allow you to update the firmware, adjust touch control and select an equalizer. Without third-party applications, only basic playback and volume control functions are available.
| Model headphones | Bluetooth version | Audio codec | Delay (Latency) |
|---|---|---|---|
| Mi True Wireless Earbuds Basic | 5.0 | SBC | Tall. |
| Mi True Wireless Earbuds Basic 2 | 5.0 | SBC, AAC | Medium |
| Mi True Wireless Earphones 2 | 5.0 | SBC, AAC | Low. |
| Mi True Wireless Earphones 2 Pro | 5.2 | SBC, AAC, LHDC | Minimum |
⚠️ Note: When connected to Android 12 and above, the system can request permission to access contacts and call logs. Without this permission, the headset will only work as a music player, without the ability to answer calls.
Synchronization with Apple iOS devices
iPhone owners can also successfully use Xiaomi headsets, although the functionality can be slightly limited compared to Android.The connection process on iOS is as simple as possible thanks to energy saving protocols. Open a case with headphones next to the unlocked smartphone.
The iPhone screen should display a system window with an image of the headphones and a plug-in button. If the automatic window doesn't appear, go to Settings → Bluetooth and find the device manually in the "Other Devices" list. Click on the model name to start pairing.
Unlike Android, iOS doesn’t have a native audio customization app from Xiaomi. All changes, such as removing the headphone for pause or double-touching, work at the level of hardware commands that are transmitted by standard iOS tools.
- 🍏 Unlock your iPhone and keep it next to your case.
- 🔍 If a pop-up doesn’t appear, look for the device in the Bluetooth menu.
- 🎧 Check the microphone in the application "Dictorphone».
Importantly, the display of battery power on iOS may not be as detailed as it is on Android.The battery widget shows the overall charge of the case, but sometimes doesn't display the percentages for each headphone separately without third-party utilities.This is normal behavior for third-party devices in the Apple ecosystem.
Customization of control and sound through applications
The right software is needed to unlock the full potential of your Mi True Wireless, and the main tool is the Xiaomi Earbuds app (formerly known as Mi True Wireless Earbuds), which is available on Google Play and allows you to flexibly configure the behavior of the headset.
In the app menu, you'll find the "Touch settings" section, where you can reassign actions for single, double and triple touch, for example, assign a triple touch to call the voice assistant, and a double tap to switch the track, and by default, the settings may not be optimal for all users.
The gamer's secret mode
The app also has a headphone search feature, so if you lose one of them in the room, press the "Find Earbuds" button and the device will start to make a loud piercing sound, which helps locate the gadget even under the couch or in your clothes. Remember to reset the settings after that so you don't stun yourself the next time you pull it out.
Updating the firmware is a critical step in customization, and manufacturers regularly release patches that improve connection stability and noise reduction. In the app, this is done through the "Firmware Update" section. Never interrupt the update process and keep the case charged at least 50% while writing new firmware.
Problem Solving: Headphones are not synchronized
It's not uncommon for a phone to see headphones but not connect, or only one channel to connect, and most often it's because the left and right headphones are out of sync with each other, and they've forgotten their partner and they work independently.
To solve this problem, you need to perform a full reset. Place both earbuds in the case and close the lid. If there is a functional button on the case, press it for 10-15 seconds before changing the color of the indicator. If there is no button, use the touchpads.
Instructions for resetting through the sensor:
1. Remove the headphones from the case.
2. Turn off Bluetooth on your phone.
3. Touch the touch zone on both headphones at the same time 4-5 times quickly.
4. Wait until the indicators light up red or flash otherwise.
5. Put the headphones back in the case.Remove the old device from the Bluetooth list on your phone ("Forget the device") after reset, and then repeat the pairing procedure again, 90% of the time, it returns the headphones to factory settings and restores communication between channels.
⚠️ Warning: If the problem persists after reset, check the charging contacts on the headphones. Oxidation or dirt can interfere with charging one of the channels, which makes it not turn on and not involved in synchronization.
- 🔄 Remove the device from the Bluetooth list ("Forget»).
- 🧹 Wipe the contacts of headphones and case with a dry cloth.
- 🔌 Charge the case from another cable or power supply.
Optimization of work and energy consumption
To extend battery life, it is important to use the power saving features correctly. Bluetooth 5.0 and higher consumes less power, but constantly searching for the network can drain the battery. If you don't use headphones, always put them in the case.
The case also consumes energy even when the headphones are inside. If you plan to not use the headset for a long time (a week or more), discharge the case completely or store it with a charge of about 50-60%. Lithium polymer batteries do not tolerate long-term storage in a fully charged or fully discharged state.
💡
Proper storage of a case with a charge of 60% extends the battery life by 20-30% compared to storage at 100% charge.
Avoid using headphones in areas with powerful sources of radio interference, such as microwave ovens or industrial equipment.This not only degrades the sound quality, but also makes the Bluetooth module work at maximum power, which speeds up the discharge.
Clean the speaker mesh regularly of earwax. A clogged speaker makes you turn up the volume, which also affects power consumption and can damage the membrane. Use a soft brush or a special sticky tape to clean.