How to set up a call on the increasing on smartphones Xiaomi: the full guide

Xiaomi’s incremental call feature is a convenient solution for those who want the ringtone to start quietly and gradually amplify, an option that helps avoid a sharp beep, especially useful at night or in quiet rooms, but not everyone knows how to set it up correctly or even about its existence.

In this article, we will discuss in detail how to activate and optimize a call on increasing on Xiaomi devices, including models based on the use of the device. MIUI You'll learn not only the basic steps, but also the hidden nuances that will help you avoid typical bugs, like why a feature might not work on some firmware or how to pair it with customized contact tunes.

We will pay special attention to Redmi models, POCO And Xiaomi flagships, because the interface may be different, and we'll also look at alternative methods for devices where standard settings are not available.

What is a call on an increasing and why it is needed

Accumulating Ring (or Ascending Ring) is a mode in which the volume of an incoming call starts at a minimum level and gradually increases to a maximum.

• 🔇 Smooth wake-up: perfect for alarm clocks or nighttime bells so as not to scare you with a sharp sound.
• 🏠 Office convenience: allows you to hear a call without distracting colleagues with a loud beep from the first moment.
• 📱 Battery savings: on some Xiaomi models, smooth volume increase reduces speaker load.
• 🎵 Melody Compatibility: Works with both standard ringtones and custom tracks.

But there are limitations, like on devices with MIUI 12 and below may conflict with Do Not Disturb mode, and not all custom firmware supports this option. It is important to note that incremental calls only work for incoming calls, not notifications or alarms (unless set up separately).

Interestingly, in some models, POCO This is called Adaptive Ringing, and it has advanced settings, including volume time adjustment. We'll come back to that later.

How to turn on a call on increasing Xiaomi: step-by-step instructions

Activation of the function depends on the version MIUI Let's look at a universal method that works on most devices, including the Redmi Note. 10/11/12, Xiaomi 12/13 and POCO F4/X4.

Check the version first. MIUI In Settings → The phone. → Version. MIUI. If you MIUI 13/14, follow these steps:

1. Open the Settings app (cog icon).
2. Go to the section Sound and vibration.
3. Choose a Call or a Call Melody (the name may vary).
4. Then, make a call to the scaling (or the scaling up).
5. Activate the switch to the position on..
6. If necessary, adjust the duration of the build-up (usually from 5 to 30 seconds).

On devices with MIUI 12 and below the path may be different:

Settings → Sound → Additional → Call on the increasing

If you don't find this option, it may be hidden.

Setting up the build-up time and volume

Once you activate the function, it's important to set the settings right, and that depends on how comfortable you'll be using the smartphone.

• ⏱️ Duration of build-up: determines how long it will take to increase volume from minimum to maximum. Optimal value is 10-15 seconds.
• 🔊 Start volume: minimum sound level at the start of a call. Too low can lead to the call being missed.
• 📈 The curve is linear or exponential, and the second one is faster to reach a comfortable level.

To change these parameters:

1. Go to Settings. → Sound and vibration → Running up the phone.
2. Slip on the Additional settings (or the gear icon).
3. Adjust the sliders Duration and Start Volume.
4. Select the type of curve in the menu Growth mode.

On models POCO F3/F4 Xiaomi 11T Adaptive Ringing is available, where you can set up separate profiles for day and night, for example, at night the call will grow slower, and during the day – faster.

💡

If you have a custom ringtone set, check the length of the call. If the track is shorter than the build-up time (e.g., 5 seconds vs. 15), the volume will not have time to increase to the maximum.

On models with a Snapdragon processor 8 Gen 1/2 (for example, Xiaomi 12 pro POCO F4 GT) This feature may conflict with Dolby Atmos technology, in which case, disable Dolby in the audio settings before activating the incremental call.

Problems and Solutions: Why the Incremental Call Doesn't Work

Even after you set it up properly, the function may not work, and let's look at the typical causes and ways to fix them:

⚠️ Note: If you use third-party audio management applications (such as Volume Booster or SoundAssistant), they may block the standard incremental call function.

• 🔕 Do Not Disturb: Check if it is activated in Settings → Notifications → In this mode, all sound effects, including volume, are turned off.
• 🔄 Sound profile conflict: If you have customized profiles (e.g., "Work", "Home"), the feature may not work. Switch to a standard profile.
• 📱 Outdated firmware: on MIUI 11 and below the function may be unstable. → Updating the system.
• 🎵 Incompatible melody: some custom ringtones (especially in format.m4a) They don't support smooth build-up. Try a standard tune.

If the problem persists, reset the sound settings:

Settings → System → Resetting settings → Resetting sound settings →

On devices with MIUI 14 You can also use a safe mode for diagnosis:

1. Press the power button before the off menu appears.
2. Hold your finger on the option to turn off until the offer appears to go to safe mode.
3. Verify and check if the function is working, and if so, the problem is in third-party software.

💡

If the surge call is running in safe mode, but not in normal mode, remove the newly installed applications for managing sound or sound effects.

Alternative ways to set up a smooth call

If your Xiaomi model doesn’t support the standard feature, you can use workaround methods.

1. Apps from Google Play

There are specialized utilities that emulate a call on an incremental basis.

• 📌 Volume Booster & Equalizer – allows you to adjust the volume curve for calls.
• 🎛️ SoundAssistant (from Samsung, but runs on Xiaomi) – has the option of Increasing Ringtone.
• 🔊 Ringtone Maker – Creates custom tunes with a smooth start.

To set up:

1. Install one of the applications (e.g. SoundAssistant).
2. Open it and find the Call Settings or Ringtone section.
3. Activate the Increasing Volume option.
4. Set the build-up time (8-12 seconds are recommended).

2.Use of Tasker or Automate

For advanced users, automation through Tasker or Automate is a good option, and these applications allow you to create scenarios where the volume of a call increases according to a given algorithm.

Example of the script for Tasker:

Profile: Incoming Call (Event → Phone → Phone Ringing)


Task:




1. Set the volume of the call to 10% (Action → Audio → Ringer Volume)




2. Wait 3 seconds (Action → Task → Wait)




3. Increase volume by 15% (repeat steps 1–2 with gradual increase to 100%)

This method requires manual tuning, but gives you complete control over the behavior of the call, for example, you can program different surges for different contacts.

⚠️ Note: When using Tasker or similar tools, watch for permission to Change System Settings. Without it, the script won't work. ADB: adb shell pm grant net.dinglisch.android.taskerm android.permission.WRITE_SECURE_SETTINGS

Compatibility with individual melodies and contacts

One of the useful features of a Xiaomi incremental call is that it can be applied to individual contacts, allowing you to set up a smooth surge only for calls from family or important customers, leaving a standard call for the rest.

To assign a function for a specific contact:

1. Open the Contacts app and select the contact you want.
2. Tap Edit (pencil icon)
3. Select the Melody of the Call (or the Notice Sound).
4. Activate the option to call on the increasing for this contact (if available).
5. Set up the growth parameters (similar to the main settings).

If the option is not available in the contact interface, you can use the workaround:

• Create a contact group (such as “Family”) in the Contacts app.
• Assign a unique tune with a smooth start (you can create it in Ringtone Maker).
• In the sound settings, activate the call on the increasing for this melody.

On devices with MIUI 14 Priority Contacts is also available, where you can set separate rules for calls, including volume increase:

Settings → Notifications → Priority Contacts

Comparison with similar features on other brands

The uplink feature is not unique to Xiaomi, but let’s look at how it’s implemented by competitors to understand the strengths and weaknesses of Xiaomi’s solution.

Xiaomi’s main advantage is flexibility, for example, only here you can separately adjust the build-up for the first and second SIM-slot (on dual-sim models), but Samsung’s implementation is more polished, and the Google Pixel offers adaptability for the environment.

If you often switch between different brands, pay attention to the POCO F4 GT Xiaomi 13 Pro – here the function of calling on the increasing is as well developed and almost not inferior to competitors.

Frequent questions about the call on the increasing Xiaomi