Xiaomi wireless speakers often face situations where gadgets stop syncing correctly with the smartphone or work incorrectly, this can manifest itself in the desynchronization of channels when the sound comes from only one earphone, or in the inability to detect the device via Bluetooth. In such cases, standard reconnection often does not help, and requires deeper intervention in the software part of the accessory.
The Full Reset procedure, or Hard Reset, allows the device to return to its original state by removing all accumulated pairing errors and temporary configuration files. It is a universal method of solving most software failures that does not require special hardware or a connection to the computer. It is important to understand that after this operation the gadget will behave as when it was first removed from the box.
In this guide, we will discuss in detail the algorithms for various models of the Mi True Wireless Earphones line, including basic versions and modifications with support for ANC (active noise cancellation), you will learn how to correctly interpret light indicators, what nuances exist when resetting left and right headphones separately, and how to avoid common errors that can lead to locking the device.
Causes of unstable work of wireless headphones
Before we take any drastic measures, it’s worth understanding the nature of the problems. Bluetooth protocol, while the de facto standard for wireless audio transmission, is subject to external interference. Nearby Wi-Fi routers, microwave ovens, and other sources of RF radiation can create “noise” that disrupts the stability of the connection between the smartphone and the headset.
Another common cause of failure is the desynchronization of the headphones themselves. In TWS (True Wireless Stereo) mode, one headphone acts as a master transmitting a signal to the second. If this communication channel is disrupted by a software error, the user may hear mono-sound or observe the complete silence of one of the channels, and problems may arise due to overflow of the internal memory of the pairing cache.
⚠️ Warning: If the headphones stop charging or don't respond to touches after being removed from the case, make sure the contacts aren't contaminated.Resetting won't help if the problem lies in the oxidation of charging pins or a discharged battery.
Software glitches of the smartphone operating system can also affect the operation of accessories. Updating Android or iOS sometimes changes the algorithms of the Bluetooth stack, which leads to conflicts with old connection profiles. In such cases, cleaning the list of associated devices and subsequent resetting of headphones are mandatory steps to restore functionality.
Preparation for the resetting procedure
To successfully perform the procedure, you need to follow a certain sequence of steps. The first step is to completely remove the device profile from the memory of your smartphone. Go to the Bluetooth settings, look in the list of Xiaomi Mi True Wireless Earphones and select the option “Forget the device” or “Unpair”.
Next, you need to check the charge level. To correctly complete the process of rewriting the internal configuration, the case and the headphones themselves should have at least 30-40% energy. If the charge is critically low, place the headphones in the charging case and connect it to the network for 15-20 minutes.
☑️ Checklist before reset
It is also important to disable Bluetooth on all other devices that have previously been paired with this headset.If a laptop or tablet tries to automatically connect to the headphones during the reset process, the procedure may be interrupted, leading to an incorrect result.
Universal Reset Method for Most Models
Most Xiaomi headphone models, including the popular AirDots series and Mi True Wireless Earphones Basic, use a single reset logic through touch panels.This method does not require a physical button on the case case body, making it versatile for compact devices.
Place both earbuds in the charge case. Leave the lid open. You need to press and hold the touch zones on both earbuds at the same time. The retention time is about 20 seconds, at which point the headphones will flash red, signaling the beginning of the memory cleanup process.
Sequence of action:
1. Put L and R in the case.
2.Push and hold the sensors for 20 seconds.
3. Wait for the red flash.
4 Release and close the case for 10 seconds.Once the lights turn red, release the sensors. The lights should go out. Close the charger case and wait about 10 seconds. Then reopen the lid and remove the headphones. They will automatically go into pairing mode, as evidenced by the rapid blinking of the white light on one of them.
💡
If you don’t succeed the first time, try increasing the sensor retention time to 25-30 Sometimes it takes several attempts to accurately hit the time window of the reset.
Reset models with a button on the charging case
More advanced models, such as the Mi True Wireless Earphones 2 or wireless charging versions, often feature a physical control button on the case case, which simplifies the procedure and makes it more like resetting routers or other gadgets.
Put the headphones inside the case and make sure the lid is open. Find a function button that is usually located on the end or back of the case. Press it and hold it for 15 seconds. The light indicator on the front of the case should start flashing white at intervals indicating the reset mode.
| Model headphones | Type of management | Indication of discharge | Retention time |
|---|---|---|---|
| Mi True Wireless Earphones Basic | Touch (touch) | Red (5 times) | 20 seconds. |
| Mi True Wireless Earphones 2 | The button on the case | White flashing | 15 seconds. |
| Redmi AirDots S | Touch (touch) | Red (2 times) | 20 seconds. |
| Mi True Wireless Earphones Pro | The button on the case | Orange | 10 seconds. |
Once the lid is successfully reset, the indicator will stop burning or change the pattern of blinking. Close the case cover for 5-10 seconds so that the device can save the changes and restart. Once the lid is opened, the headphones are ready for new pairing. This method is considered the most reliable, since it eliminates accidental interruption due to incorrect touch of the sensors.
Solving the problem of channel desynchronization
One of the most common problems is when the headphones work independently, for example, the music only plays in the left channel, the right one is silent, or each ear has a track, which means that the connection between the L (Left) and R (Right) modules is lost.
To solve this problem, you often need to reset the communication between the headphones themselves, ignoring the smartphone for now. Remove both earphones from the case. Turn off Bluetooth on the phone. Then quickly press 5 times on the touchpad of each earphone. If the procedure is done correctly, the indicators should flash red, which means the current connection is broken.
⚠️ Warning: When you reset your connection, always connect your headphones to your phone first. If you connect them first and then search with your phone, the priority of the connection may be lost and the stereo mode will not work.
After a series of quick presses, put the headphones back in the case, close the lid and wait 10 seconds. Then remove them again. Now they must automatically find each other (the indicator on one will flash slowly, on the other will go out), forming a single stereo pair, only after that you can turn on Bluetooth on your smartphone and search.
What to do if the indicators do not flash?
Post-reset and reconjugation
Once you've done the factory reset, your Xiaomi headphones are in a clean slate state, they don't remember your phone, tablet or laptop anymore, and you have to do the primary pairing again.
Turn on Bluetooth on your mobile device and go to the menu to find new devices. Remove the headphones from the case. If the reset is successful, the indicator on one of the headphones (usually right) will quickly flash white, signaling the Pairing Mode mode. The name of your model will appear on the list of available devices.
Click on the device name to connect. In some cases, the system may request confirmation of the access code — just confirm the action. Once the connection is successful, the voice assistant can report the status of "Connected." Check the audio playback in both channels to make sure that there is no desynchronization.
💡
The correct procedure after reset: 1. Reset headphones. 2. Close the case for 10 seconds. 3. Remove the headphones (they will connect themselves). 4. Turn on Bluetooth on the phone and search. Violation of this sequence is the main cause of failure.