How to Reset Xiaomi Mi True Wireless Earbuds 2

Users of fully wireless acoustics often face situations when the device stops responding correctly to commands or refuses to connect to a smartphone. Owners of the Xiaomi Mi True Wireless Earbuds 2 model are no exception, and for them the issue of restarting the gadget system becomes relevant at the first signs of unstable operation. Resetting is the most effective software method for solving most typical malfunctions without contacting the service center.

The factory return procedure removes all stored pairing profiles and restores the original software configuration. This is an action that should be performed if the headphones are unpredictable, make extraneous noises or one channel stops working in sync with the other. In this guide, we will discuss all the steps of this process in detail so that you can quickly resuscitate your headphones. TWS-headphones.

Sometimes the problem is not software failure, but in the banal discharge of the battery or contamination of contacts. Before you start radical measures, make sure that the case and the headphones themselves have enough charge. If simple methods did not help, then Hard Reset will be your main tool for restoring the health of the gadget.

Diagnosing problems before resetting

Before you reset, it’s important to understand whether the problem really requires such drastic measures. Often users confuse software errors with physical damage or a discharged battery. If your Xiaomi Mi True Wireless Earbuds 2 is just quietly playing, it may be the volume settings on the smartphone itself or in the app.

However, there are a number of symptoms that directly indicate the need to perform a complete reset, and ignoring these signs can lead to the device finally becoming undetectable by the system.

• 🔊 The headphones only play one side of the sound, although both channels are charged.
• 📱 Smartphone sees device in Bluetooth list, but connection immediately cuts off.
• 🔋 Indicators on the case flash chaotically or do not light up when installing headphones.
• 🎧 Voice assistant or touch control stopped responding to touch.

If you experience at least one of these symptoms, the chances of a successful recovery after a reset are very high, and in some cases, it may be necessary to remove the device from the Bluetooth list on the phone before starting the procedure.

⚠️ Warning: If the headphones have been in water or have been subjected to a severe mechanical shock, a software reset may not help.

Preparation for the discharge procedure

Quality preparation is key to the successful completion of any technical operation. For the Xiaomi Mi True Wireless Earbuds 2, it is critical to ensure a stable power supply during the process. Make sure that the case is at least 50% charged and the headphones are tightly installed in their sockets.

You don't need any special tools or a computer, the whole operation is done manually, but you should open the Bluetooth settings on your smartphone in advance, so that you can quickly remove the old pairing if you need to, and this will help avoid confusion when the device reappears in the list.

It's important to understand that the reset process cleans the pairing memory, which means you have to reconnect the headphones to your phone, as if you just bought them from a store, and all previously stored devices will be "forgotten" by the headset.

How to Reset Xiaomi Mi True Wireless Earbuds 2

The process of returning to the factory settings for this model is quite simple, but requires a precise sequence of actions. Any deviation from timing can lead to the fact that the reset mode is not activated.

First, remove both earbuds from the charge case. Make sure they are on (usually they turn on automatically when removed). Then you need to simultaneously pinch the touch areas on both earbuds. Hold them for about 5-7 seconds until the indicators start flashing red.

Sequence of action:


1. Remove the headphones from the case.




2. simultaneously touch the sensors on the L and P headphones.




3. Hold 5-7 seconds until red flash.




4. Put it back in the case for 10 seconds.




5. Extract and verify the work.

Once you see a red flash, immediately place the headphones back in the case, which will lock the memory clear command, leave them in a closed or open case (depending on the case model, but preferably open for visual inspection) for about 10 seconds.

💡

If you can't catch the flashing moment the first time, try changing the force of the press. The sensors must be pinched at the same time, the slightest desynchronization can interrupt the command.

After 10 seconds, remove the headphones again, and they must now go into pairing mode, which is usually indicated by the quick blinking of white lights, which means that the reset has been successful and the device is ready for new pairing.

Alternative method through the application

In some cases, especially if the touch control is not working properly, you can try resetting through the official Xiaomi Earbuds or Mi Wear app.This method is less reliable for deep reset, but helps to update the configuration.

You need to connect to your headphones via Bluetooth, open the app, and find the settings section of the device, and there may be an option called Reset or Factory Reset, but the classic method of pinching sensors is considered more effective at eliminating critical errors.

Using the app is advisable if you want to just reconfigure the sensors but have not encountered major connectivity issues.

Reconjugation process

After a successful reset, your Xiaomi Mi True Wireless Earbuds 2 is in search mode. Now you need to pair again. Open your Bluetooth settings on your smartphone and start looking for new devices.

In the list of available devices, find "Mi True Wireless Earbuds 2" and click on it to connect.If you haven't previously deleted the old Bluetooth headphone entry, it's recommended to do so now to avoid confusion with duplicates.

• 📲 Open the Bluetooth menu on your smartphone.
• 🔍 Click on “Search for Devices” or wait for automatic scanning.
• 🎧 Select "Mi True Wireless Earbuds 2" from the list.
• ✅ Confirm the pairing if a request appears.

Successful connectivity will be confirmed by a voice message "Connected" or a characteristic beep in the headphones, and you can now check the music playback and the microphone.

⚠️ Warning: If the phone sees two devices with the same name after reset, remove both and repeat the reset procedure again, strictly observing the timing of the sensor retention.

💡

The main goal of repairing is to create a new clean communication profile between the phone and headphones, free of old configuration errors.

Typical errors and their solution

Even following the instructions, users may encounter difficulties, and one of the common problems is that the headphones don't go into reset mode, which may be because the touch areas are contaminated or not pressed at the same time.

Another common mistake is not enough retention time. Many users let their fingers go too early without waiting for a red flash. Time is crucial here, so be patient.

If the lights don't light up at all, check the contacts in the case. Oxidation or dust can prevent charging, making the headphones feel turned off. Wipe the contacts with dry soft cloth.

Prevention and care of the device

To reset the settings as rarely as possible, you should properly operate Xiaomi Mi True Wireless Earbuds 2. Regularly clean the speaker mesh from earwax, as its accumulation can distort the sound and affect the operation of proximity sensors.

Don’t let the battery run completely to zero for a long time. Deep discharge damages lithium-ion batteries and can lead to unstable electronics, which is often mistaken for a software glitch.

Timely updates to firmware through the app also help avoid bugs. Developers periodically release patches that improve connection stability and sound quality.