How to reset the settings on Xiaomi True Wireless headphones: the full guide

Owners of wireless acoustics from Xiaomi often face situations when the usual gadgets stop working correctly: the sound disappears in one of the channels, the device does not see the smartphone or the indicators behave chaotic. In such cases, the most effective solution is a complete reset to factory parameters, which eliminates software synchronization errors between the right and left ear.

Hard Reset procedure for TWS-The models (True Wireless Stereo) are radically different from simple actions with wired headsets or full-size headphones. Here it is important not just to turn off the device, but to run a special algorithm for flashing the internal memory of the controller, which erases all the accumulated data about previous connections.

In this detailed guide, we will break down all the known ways to return to factory condition for various Xiaomi, Redmi and other headphone series. QCY (often OEM-You will learn how to interpret the flashing of indicators correctly, why it is important to remove the device from the Bluetooth menu of the phone before the procedure, and what nuances exist for models with touch control.

Preparation for the resetting procedure

Before you start taking action with buttons and sensors, you need to follow a number of preparatory steps, ignoring which can lead to the fact that the reset simply does not happen. The first and most critical step is to remove the profile of the device from the memory of your smartphone or tablet.

Go to your mobile device’s Bluetooth settings, find your headphones (such as Xiaomi AirDots or Redmi Buds) in the list of paired gadgets, and select the option “Forget the device” or “Unpair the pairing.” This action breaks the logical connection and clears the cache of encryption keys on the phone side.

⚠️ Note: If you don’t remove the device from the Bluetooth list on your phone before starting a reset, the headphones can automatically reconnect (reconnect) during the reboot process and the procedure will reset halfway through.

The second important step is to check the battery power: make sure that the charging case and the headphones themselves are charged at least 50-70%. During the reset, the controllers consume more energy, and if the charge falls below the critical level, the gadget can go into deep sleep or freeze.

It is also recommended to clean the physical contacts. Wash the charging contacts on the headphones themselves and inside the case with dry, lilaless material. Oxidation or dust can cause one of the ears to fail to recognize the location in the case, making it impossible to start the reset mode.

📱 Be sure to remove the device from the Bluetooth list on your smartphone.
🔋 Check the charge level of the case and headphones (minimum 50%).
🧹 Wipe charging contacts with an alcohol napkin or dry cloth.
🚫 Turn off Bluetooth on your phone during the procedure.

Universal Reset Method for Models Without a Case Button

Many popular models, such as Xiaomi Mi True Wireless Earbuds Basic (AirDots), Redmi AirDots S and their counterparts, do not have a physical button on the charging case. For them, the reset procedure is performed directly through the touch panels of the headphones themselves, which requires a certain dexterity and timing accuracy.

Place both earbuds in the charge case and make sure they start charging (lights light up). Then remove them at the same time. On both earbuds, press and hold the touch areas. Depending on the model, the retention time can vary from 5 to 20 seconds.

It is important to monitor the color of the indicator. Usually after 5 seconds, the headphones turn off (the red indicator goes out or lights up), but you can not let your fingers go. You need to continue holding the sensors for another 10-15 seconds until the indicators flash red several times (usually 2-3 times) or change color to white / blue, which signals a successful entry into pairing mode after reset.

☑️ Reset algorithm without a button on the case

Remove the headphones from the caseClutch sensors on both headphonesWait for shutdown (5 seconds)Continue to hold until blinking (15-20 seconds)Check the search in Bluetooth

Done: 0 / 5

Once the indicators signal a successful reset, put the headphones back in the case, close the lid and wait 10 seconds. Then re-extract them - they should go to the pairing mode (fast flashing white or blue light), and you can reconnect them to the phone.

Resetting settings for models with a button on the charging case

More advanced models such as the Xiaomi Mi True Wireless Earphones 2, Air 2 Pro, Air 2S and FlipBuds series feature a physical functionality button on the case case body, which greatly simplifies the process and makes it less dependent on sensor accuracy.

To perform the reset, place both earbuds in the case and leave the lid open. Find the function button (usually located on the back wall or between the indicators on the front panel). Press and hold this button for 10-15 seconds.

As you hold it, the indicators on or inside the case will flash, and you can start to have a normal charge indication cycle, but after 10 seconds, the pattern of blinking will change, the indicators will flash quickly in white or alternately in red and white, and that is the signal that Factory Reset is complete.

Model headphones	Positioning of the button	Retention time	Indication of success
Mi True Wireless Earphones 2	Side of the case	10 seconds.	White flashing
Air 2 Pro	Behind the case	10-15 seconds	Orange blinking
FlipBuds Pro	Inside the case	10 seconds.	White flashing
Redmi Buds 3 Pro	Back/bottom	10 seconds.	Orange light

Release the button immediately after changing the flashing mode. If you hold the button for too long, some models may go into firmware update mode or other service modes, which will require additional intervention to exit.

What to do if the button does not respond?

If nothing happens when you press the button, check if the headphones are sitting tight in the case. Some models block the reset function if the headphones are removed or do not come into contact with the charging feasts.> Gaming headsets of the Xiaomi Gaming Earbuds series and full-size Mi Headphones have their own specifics. In gaming models, a combination of volume buttons and multifunction keys is often used. For example, Gaming Earbuds may require simultaneous button clamping"+" and- on the case or on the headphones themselves during the 5-7 For full-size models such as Mi Headphones Comfort or Noise Cancelling versions, reset is often done via a combination of volume control keys and a power button. Usually you need to turn off the headphones, and then press the on button and the volume down button (or a special button) at the same time. NC) on 10-15 In some cases, full-size models may require the use of a special Mi Headphones app (or Xiaomi Earbuds). In the application settings, the option “Reset settings” or “Restore Default” is sometimes hidden, which performs a software reset without dancing with a diamond around the buttons. 🎮 Game models: often require volume buttons to be clamped. 🎧 Full-size: Power combination + Volume Down. 📱 Apps: Check for a reset button in the Mi Headphones App. 🔌 Wired connection: some models are reset when connected by USB-C Diagnosis of problems: when reset does not help There are situations when even a correctly executed reset does not solve the problem. If the headphones don't connect, charge, or only work on one side after the procedure, the cause may be deeper than a software synchronization failure. If oxide is found on the headphone contacts or inside the case, the device may think it's not in the case and not initiate the reset process. Careful cleaning with alcohol (isopropyl) can do wonders. ⚠️ Warning: Do not use water or harsh chemicals to clean the contacts, only isopropyl alcohol and cotton swabs, getting moisture inside the speaker will lead to irreversible damage to the membrane, and the firmware version may also be the problem. If the headphones have not been updated for a long time, their internal program may conflict with new versions of Android or iOS. After reset, try connecting them to Mi Home or Xiaomi Earbuds and checking for updates. In rare cases, one of the batteries in the headphones or in the case itself fails. If one earphone discharges faster than the other or the case does not charge one of the ears, the software reset here is powerless - you need to replace the battery or repair. Frequently asked questions (FAQ) Why don't the headphones see each other after the reset? That means the synchronization between the left and right channels hasn't recovered. Try repeating the reset procedure, but this time, after you've removed it from the case, don't touch the headphones. 10-15 So, let them find each other, and make sure that the Bluetooth on the phone is off when you sync with each other, can you reset the settings if the case is completely discharged? No, the case needs to be charged to do the reset procedure. Headphones take the energy to reset and then calibrate from the case in the first seconds. Charge the case at least 15-20 minutes before the operation. Reset removes the history of pairing with all devices? Yes, after Hard Reset, the headphones forget all the devices they have ever connected to. You will have to re-pair with each phone, tablet or laptop as if you use them for the first time. What does flashing red and white after reset? In most Xiaomi models, this is a standard behavior, which means that the headphones are in device search mode (Ping, however, you need to repeat the procedure from them, if you do not flash one of the Bluetooth, but you need to repeat the procedure? A full reset to work in stereo mode is impossible without both headphones, because they must sync with each other. However, many models allow you to use a single earphone in mono mode. To do this, just remove the device from Bluetooth and remove the remaining earphone from the case — it must go into pairing mode.