Owners of wireless headphones from Xiaomi often face a situation when the device stops correctly pairing with the phone or makes extraneous sounds. In such cases, the only effective solution is a complete reset to the factory settings. The procedure of returning to the original state helps to eliminate software errors that accumulate during the operation of the gadget.
Many users mistakenly believe that it is enough to simply remove the device from the Bluetooth list on the smartphone. However, this action only breaks the connection, but does not clear the internal memory of the headset from accumulated cache or erroneous configurations. A complete reset is necessary when there are regular connection breaks, a quiet sound or failure of one of the headphones to turn on.
In this article, we will discuss in detail all the current ways to reanimate your audio system. You will learn how to properly perform a hard reset for various models, including the popular Mi True Wireless Earphones and wired versions with a Bluetooth module. Following the instructions will extend the life of the accessory without contacting the service center.
When you need a complete reset of the headset settings
Understanding the symptoms of a malfunction is the first step to successful repairs. Often users ignore the first signs of software failures until the device stops working completely. Reset Xiaomi headset is required in cases where standard troubleshooting methods do not work.
There are a number of telltale signs that suggest that the headphone software needs to be tampered with, and ignoring these signals can cause the device to become permanently de-identified by the phone.
- 🔊 Headphones work extremely quietly even at maximum volume on the smartphone.
- 🔗 The device can’t see the phone or loses the connection in your pocket.
- ⚡ One of the headphones discharges much faster than the other or does not charge at all.
- 📢 The appearance of static noise, cracking or distortion when playing music.
Importantly, a software failure can occur after updating the smartphone operating system or attempting to pair with non-standard hardware, and in such situations, the internal logic of the Bluetooth module can conflict with new security protocols.
⚠️ Warning: If the headset is physically damaged (water hit, impacts, broken cable), a software reset will not help restore the performance of the speakers or battery.
📊 Have you encountered problems connecting Xiaomi headphones?
Yeah, they're always bugging me.
It was a couple of times.
No, it's working perfectly.
I have a different brand of headphones.
Preparation for discharge and diagnosis
Before you start active, you need to make a preliminary diagnosis, and often the problem is not the headphones themselves, but the settings of the phone or the battery that is discharged, and the diagnosis eliminates false positives and saves time.
Make sure both headphones and the case (if any) have enough charge. Low voltage in the battery can cause chaotic electronics behavior that the user mistakenly takes for a software glitch.
The next step is to remove the old pairing profile, a critical step that many people miss, and if you don't remove the device from the phone's memory, it might try to automatically reconnect with the stored erroneous settings after resetting.
For owners of models with noise cancellation, it is also recommended to check for firmware updates through the Mi Earbuds or Xiaomi Wear app. Sometimes manufacturers release patches that fix known bugs without the need for a complete reset.
Universal reset method for TWS headphones Xiaomi
Most modern models, such as the Mi True Wireless Earphones 2, Air 2 or Redmi Buds, use a similar reset algorithm through a charging case.
The reset process involves mechanical interaction with the pairing button or touchpads. The exact sequence of actions depends on the particular model, but the general principle remains the same throughout the Xiaomi ecosystem.
Place both headphones in the charger case and make sure they start charging (indicators should catch fire). Leave the case cover open. Find the function button on the case case case case case (usually located between the headphone compartments or on the back edge).
Press and hold this button for 10-15 seconds, the status indicator will flash white, and then it can change color to orange or red, which signals the beginning of the memory cleanup process. Once the indicator goes out or lights up with an even light, release the button.
What to do if there is no button in the case?
If your charger case doesn't have a physical button, the reset is done through the sensory areas of the headphones themselves. Place them in the case, press the touch areas on both headphones simultaneously and hold them. 20-30 seconds before the indication changes.> Once the procedure is completed, the headphones will go into device search mode, and the name of your model should appear on the screen of the smartphone in the list of available networks, and you can pair it again, as with a new device. ⚠️ Note: Do not remove the headphones from the case during the button retention, otherwise the reset process will be interrupted and the settings will not be cleared. Reset wired Bluetooth headsets and neck models For owners of Neckband form factor devices such as Mi Bluetooth Neckband or Mi Sports Bluetooth Headset, the procedure is different. Here, the case is the case itself, and the control is done through a combination of control buttons, and in such models, the reset is often done by a combination of volume buttons and a multifunction key. This is because there is no separate charging container with electronics to reset. All the control elements are located in a flexible arc. Turn off the headset completely. Then simultaneously press the on button (or multifunction button) and the volume down button (Volume -). Hold them for a while. 5-7 - Volume Down (+) + Power Button = Hard Reset In some modifications, such as the Mi Bluetooth Headset Basic, you may need to press the on button and the answer button to the call. The light indicator should start flashing blue and red, which means entering pairing mode and clearing the memory. If the standard combination doesn't work, try pressing all the physical buttons available at the same time on the device that's turned off, and then turning it on without letting your fingers go. This "three-finger method" sometimes helps to resuscitate the hanging controllers. Comparison of reset methods for different models. Xiaomi's ecosystem has dozens of audio device models, and there's no universal "Reset" button. Understanding the differences between series will help avoid errors and damage to the device. Below is a table that systematizes reset methods for the most popular headphone lines. Use it as a quick reference when problems arise. Device model Reset method Success indicator Duration of Mi True Wireless Earphones 2 / 2S The button on the case (10 white flashing 10-15 seconds of Redmi Buds 3 / 3 Pro button on the case (20 Orange blinking 20 Mi Bluetooth Neckband buttons Vol- and Power buttons LED 5-7 Mi Sports Bluetooth button Multifunction (3 Note that for some budget models, such as Mi In-Ear Headphones Pro (wired with Bluetooth adapter), reset may not be required. USB-connector or replace the battery in the control panel, if it is provided by the design. For flagship models with active noise cancellation, such as the Mi True Wireless Earphones Pro, it is recommended to close the case cover before resetting. 10 seconds for the device to go into deep sleep, and then perform the procedure. It helps to reset the condition. DSP-Even after a successful procedure, there can be nuances. Users often panic when they see that the phone does not see the device immediately. This is normal behavior: the headset must first complete internal initialization. One of the common problems is that the channels are out of sync, and the sound can only come from one earphone, or the stereo effect can be disrupted, and you need to repeat the reset procedure, doubling the time you hold the button. If the smartphone sees the device but writes "Connection error" or "Unable to hide", try clearing the Bluetooth cache on the phone itself. To do this, go to Android settings, find the application section that displays system processes, and find Bluetooth or Bluetooth. MIDI Service. 📱 Go to Settings. → Annexes → Show system-based. 🔍 Find it in the Bluetooth list. 🗑️ Click "Clear Cache" and "Clear Data". 🔄 Reboot your smartphone and try to connect again. Sometimes the problem is that your phone has a crowded memory. 10-15 Remove old, unused devices from the list. ⚠️ Warning: Don't try to disassemble headphones to find the reset button on the board.This will result in loss of warranty and high risk of damage to fragile plumes and battery. Prevention and proper operation To avoid the need for frequent resets, it is important to properly care for Xiaomi equipment. The main cause of failures is contact oxidation and software conflicts when you turn off correctly. Always wait until the headphones fully go into charging mode (the indicator will light up) before closing the case. Dramatic removal of the device during firmware updates or synchronization can damage the file system. Regularly wipe the charging contacts on the headphones and inside the case with dry hairless fabric. Dirt and earwax can create resistance, which causes the power controller to work incorrectly, causing false failures. Try to keep the battery from completely "zero" on a long-term basis. Deep discharge of lithium polymer batteries damages their chemical structure, which can lead to unstable stress, and how to switch on the phone again "flash, flashing on the phone, or re-turning on the "What is the phone, then switch on the phone?" Red usually indicates low battery power or process error. Make sure the case and headphones are charged at least as much as possible. 50% Before starting the reset procedure, can you reset Redmi Buds headphones through the app? There is no direct reset button in the Xiaomi Earbuds app. However, there is a feature called Update firmware, which often solves the same problems as the reset by overwriting the code. I dropped my headphones, but it's still quiet. What do you do? Check the absolute volume settings on the Android developer menu or in the special headphone app. Also make sure the speaker grid isn't full of sulfur. How long does the reset process take? 10 before 30 However, after reset, it is recommended to give the device 1-2 minutes to fully reboot the internal logic before connecting.