Wireless speakers often face a situation where Xiaomi Mi AirDots stop working properly. Headphones may not see each other, connect with only one ear or show unstable connection to the smartphone. In most cases, a software failure inside the Bluetooth module leads to dissynchronization of data channels.
The only effective solution is to force the device to restart, returning it to its original state. Resetting to factory settings clears the headset's internal memory of old pairing profiles and configuration errors, a process that takes only a minute, but is able to resuscitate a device that appears to be out of order.
In this guide, we will discuss in detail the algorithm of actions for all versions of popular "conductors", you will learn how to correctly interpret the LED indication and avoid common errors in the execution of the procedure.
Preparation for the resetting procedure
Before you start the manipulation, you need to make sure that the batteries in the case and the headphones themselves have sufficient charge. Low energy levels can cause the device to turn off during the reboot process, which will cause a re-failure. It is recommended to place the headset in the charging case for 15-20 minutes before starting work.
It is also important to remove the old device from the Bluetooth list on your smartphone. While the phone tries to automatically reconnect to Mi AirDots with the wrong settings, a normal reset may not pass. Open Bluetooth settings, find your model name and click "Forget device" or "Cancel pairing".
Pay attention to the cleanliness of the contacts. Oxidation or dust on the charging contacts can prevent the correct transmission of control signals. Wipe the golden contacts on the headphones and inside the case with dry soft cloth.
☑️ Preparation for discharge
Reset algorithm for Xiaomi Mi AirDots and Redmi Airdots
The classic Redmi AirDots (first generation) and basic Mi AirDots have mechanical control buttons, which are used to enter flashing mode, and require precise timings as the controller responds to the duration of the press.
Remove both earphones from the charger case. Make sure they're off (the indicators don't burn). If they're on, press the touchpad or the mechanical panels 5-7 seconds before turning off. Now press and hold the buttons on both headphones simultaneously.
You need to hold the buttons for a long time, about 20 seconds. First the red indicator will light up, then it will go out, and after a while the white or red light will flash 2-3 times (depending on the revision), this is a signal that the memory is cleared. Immediately after that release the buttons.
⚠️ Warning: If you release the buttons too early, the headphones will simply turn off rather than reset. hold until the indicator blinks several times after the initial sunbathing.
Why is timing so important?
Instructions for Xiaomi AirDots 2, 2S and 3 models
Newer versions, such as AirDots 2 and AirDots 3, often lack physical buttons or have altered sensor logic. In touch-controlled models (AirDots 2, Pro), resets are done through prolonged touch-zone retention.
For second-generation models, the algorithm is similar to the first: take out the headphones, turn them off, then press the touch areas on both devices simultaneously. Hold for about 15-20 seconds until a series of quick flashes of the indicator appear. In some AirDots 3 revisions, you may need to hold only one headphone (usually the right one) for 30 seconds.
The key here is synchronization, so if you pinch one headphone before the other, they might not go into TWS pairing mode, but they'll start looking for the phone, which will cause the right and left channels to work independently.
- 🔹 Make sure the Bluetooth on your phone is turned off during reset.
- 🔹 Keep your headphones close to each other (at a distance). 10-15 (c) during the procedure.
- 🔹 After reset, indicators should flash frequently, signaling a pair's search mode.
Redmi AirDots 3 Pro and Xiaomi Buds
The flagship Pro and Xiaomi Buds series models often feature case-resets, the most reliable method of eliminating the human factor when holding buttons, and have a special feature button on the back or inside of the charging case.
Place both earbuds in the case and leave the lid open. Find a circular button on the case (usually behind or inside between compartments). Press and hold it for 10-15 seconds. The indicator on the front of the case should light up white and start flashing quickly.
After that, the reset process is considered complete. Close the case cover, wait 5-10 seconds and open again. The headphones should automatically go into pairing mode. If the button on the case is missing, use the method of holding the touch zones described above, but the retention time can be up to 30 seconds.
| Model headphones | Resetting method | Duration of retention | Indication of success |
|---|---|---|---|
| Mi AirDots / Redmi AirDots 1 | Mechanical buttons | 20-25 seconds | Triple flashing. |
| Redmi AirDots 2 / 2S | Sensory zones | 15-20 seconds | Fast blinking. |
| Redmi AirDots 3 Pro | The button on the case | 10-15 seconds | White flashing |
| Xiaomi Buds 3T | The button on the case | 10 seconds. | Orange blinking |
Problem Solving: Headphones Cannot See Each Other
A common problem after reset is that the headphones don’t connect to each other, and the phone sees two devices. Basic_R" and " L." This means that the TWS (True Wireless Stereo is not activated, in which case you need to repeat the reset procedure, but with a changed tactic.
Try resetting with your headphones in your hands, but without touching touch zones (if they are touch-sensitive) so as not to knock the command down. If you have mechanical buttons, make sure you press with enough force. Sometimes it helps to remove the headphones from the case at intervals of 2-3 seconds before starting the reset.
If standard methods don't work, there's a deep reset. Put your headphones in the case, close the lid, plug the case into the charger. In 10 seconds, turn off the charger, open the lid, and start the reset immediately. This helps to restart the power controller.
⚠️ Note: If post-reset attempts headphones still work independently, it may be a problem in the hardware damage of the Bluetooth module of one of the headphones.
💡
Try resetting the network settings on the smartphone itself (Wi-Fi and Bluetooth reset) if the problem is systemic and affects all connected devices.
The process of re-pairing with the phone
After you successfully reset and flash the flashing light, turn on Bluetooth on your smartphone. Click "Search for New Devices." You should have one device with your model name on the list, and if you see two devices, it's not a success.
Click on the name in the list. You may need to confirm the pairing. Once you've connected, the voice assistant will tell you the status: "Connected" or "Portificate connected." Now check the sound in both channels.
For Android users, it will be useful to install the Xiaomi Earbuds or Mi Wear app. Through them you can check the exact charge level of each headphone separately and update the firmware if the manufacturer has released a patch to improve connection stability.
- 🔹 Make sure there are no old copies of the device left in the Bluetooth list.
- 🔹 When first connected, give all necessary permissions to applications.
- 🔹 Check the volume balance in the settings of special. capabilities of the phone.
💡
The main sign of a successful reset is that the phone sees only ONE device, not two separate channels (L and R).