How to tie wireless headphones to the Xiaomi Mi phone: an expert guide

Modern smartphones in the Xiaomi Mi, Redmi and POCO line are equipped with advanced Bluetooth modules that allow you to transmit audio signals in high resolution without delay. However, despite the automation of processes, the initial synchronization of accessories often raises questions among users, especially when working with devices of different brands or models with active noise cancellation. Proper configuration during the connection phase ensures stable operation of aptX or LDAC codecs in the future.

The MIUI or HyperOS interface is unified, but has its own nuances that are not obvious at first glance. For example, detection mode may not automatically turn on if the headset was previously associated with another gadget. In this article, we will discuss in detail the algorithm of actions that will help you avoid typical errors and ensure maximum sound quality.

Before you start setting up, make sure your accessory is at least 20-30% charged. Low battery power at the time of searching for the device can lead to unstable connection or interruption of the process (pairing), this is critical for models with active noise cancellation, which consume more energy when initializing.

Preparation of equipment and activation of search mode

The first step is to put the headphones in visibility mode. Many users make the mistake of simply turning on the device, whereas the first connection to a new phone requires a forced pairing mode. Usually this requires holding the power button or a special Bluetooth button for 5-7 seconds until the indicator flashes (alternately) blue and red.

On Xiaomi smartphones, wireless interface management is concentrated in the top notification curtain or the main settings menu. To get started, you need to activate the communication module. If you use older models like the Xiaomi Mi 8 or Mi 9, the interface may be slightly different, but the logic of actions remains the same for the entire ecosystem.

⚠️ Note: If your headphones have previously been connected to another phone, they may automatically try to connect to it when you turn on.In this case, you need to temporarily turn off Bluetooth on the old device or remove the headphone profile from its memory.

It’s also important to clear the list of previously used devices on the smartphone itself if you plan to connect the headset clean. Go to Bluetooth settings, find the device name in the list of My Devices, and click Forget Device, which will reset the encryption keys and allow you to establish a new, more stable connection.

💡

For best sound quality, try not to hold your phone in your left hand if the Bluetooth antenna is located at the bottom of the case, as the person’s body can shield the signal.

Step-by-step connection instruction via MIUI settings

After the accessory is ready, we move to the direct configuration of the smartphone. MIUI offers easy access to all the necessary functions. Follow the algorithm to ensure successful synchronization:

• 🔍 Open the Settings app on the home screen or find the gear icon in the notification curtain.
• 📡 Go to the Bluetooth section (often in the Connection and Sharing block or immediately in the top menu).
• 🔄 Click the switch to activate the module and wait for the “Sight for Everyone” or similar status to appear.
• 🎧 In the “Available Devices” list, find the name of your headset (e.g. AirDots, Soundcore, Sony). WH) and touch him.

At the time of touch, a request may appear on the smartphone screen to confirm pairing with or without the code. PIN-The standard combinations for most devices are 0000 or 1234, but modern Secure Simple Pairing protocols often allow you to do without entering code by simply clicking OK".

The process of installing drivers and profiles takes 3 to 10 seconds. At this time, do not move the devices far from each other. The optimal distance for the initial handshake is no more than 30-50 centimeters. Once successfully completed, the device status will be marked "Connected" and possibly a battery icon, if the headset supports the transfer of charge level.

Set up sound profiles and codecs

Once the device is connected, Xiaomi-based Android automatically selects the optimal audio codec, but for audiophiles and owners of flagship models such as the Xiaomi Mi 11 or Xiaomi 13 Ultra, a manual selection of compression protocols is available, which allows you to improve sound quality or reduce latency in games.

To access the advanced settings, activate the developer menu. Go to Settings → About Phone and quickly click 7 times on the MIUI Version or OS Version. Once the message "You became a developer" appears, go back and find the Additional → For Developers section.

Inside the menu, look for Bluetooth Audio Codec, and here you will see a list of formats supported by your smartphone and headphones, depending on your priorities:

Changing the codec may require reconnecting the device, and if you have lost sound or wheezed after choosing a better codec, the distance between the devices is too large or there is too much interference, in which case the system will automatically roll back to a more stable SBC protocol.

Use of Xiaomi Earbuds app and third-party software

Owners of original accessories from Xiaomi and Redmi get access to advanced functionality through a special application. For global versions it is called Xiaomi Earbuds, for the Chinese market - Mi Buds or built into MIUI Home. This software allows you not only to check the charge, but also to configure touch control.

Third-party headphones like JBL, Samsung Galaxy Buds or Huawei FreeBuds can also have their own proprietary utilities on Google Play.Installing the headphone maker's native app on Xiaomi's phone often opens up access to the accessory's firmware update, which is impossible to do through standard Android settings.

If an automatic pop-up with headphone animation doesn’t appear when you open a case, check the permissions for the Bluetooth app. In MIUI 12/13/14 and HyperOS, strict privacy settings can block widget display. Go to Settings → Apps → All apps → Bluetooth and make sure that permissions to display over other windows and access to location are enabled.

⚠️ Note: Do not install modified versions of headphone apps from unverified sources.This can lead to a “bricking” of the headset when trying to update firmware, since the data protocols are strictly licensed.

Solving Connectivity and Stability Issues

Even if all instructions are followed, there can be failures. Xiaomi smartphones are known for their aggressive energy saving system, which sometimes “kills” the background processes of the Bluetooth service to save charge. If the sound is interrupted or the headphones spontaneously turn off, you need to make exceptions to the battery settings.

Find Bluetooth or Bluetooth MIDI in the app list, go to Energy Saving and select No Limits mode, which will prevent the system from forcibly shutting down the communication module, and check whether the Flight mode or power saving on the phone itself is on, as they often limit the transmitter power.

Another common problem is the desynchronization of the left and right channels (when only one earpiece is playing), in which case the full reset of the headphones to the factory settings helps, usually by holding the sensors on both earphones for a long time (about 10-15 seconds) until the indicator flashes triple.

Frequently Asked Questions (FAQ)

In this section, we have collected answers to the most popular questions that users have when setting up wireless sound on Xiaomi Mi devices.

💡

The main problem with unstable connection on Xiaomi is aggressive battery optimization. Always put a status "No restrictions" on Bluetooth services if you experience a connection break.

In conclusion, linking wireless headphones to a Xiaomi Mi phone is a straightforward process, but requires attention to the details of setting codecs and system resolutions. The right configuration will unlock the potential of both budget and premium audio accessories.