The Chinese giant’s modern wireless headsets are complex devices that require initial calibration to unlock their full potential, and simply extracting them from the case and turning on music is often not enough, as standard factory settings may not match the individual preferences of the user or the acoustic features of his ears.
The right configuration allows you to significantly improve the quality of low-frequency playback, optimize active noise cancellation and extend battery life. In this guide, we will discuss all the stages of configuration, from basic pairing to fine adjustment of the equalizer through specialized software.
Device owners often miss the opportunity to update embedded software, which is critical to the stability of Bluetooth connectivity. Ignoring this step can lead to channel desynchronization or incorrect touch control, so we will pay special attention to the maintenance of the gadget.
Primary pairing and resetting of settings
The first step is always to establish a reliable communication channel between the headset and the smartphone. Xiaomi devices are characterized by a fast pairing mode, which is activated automatically when you open the charging case, if the headphones were not previously tied to this phone. However, in case of difficulties or when changing the source device, you must perform a forced entry into the mode (pairing).
If the headset is not behaving properly, such as one headphone is quieter than the other or they can't see each other, you'll need a full factory reset. This procedure clears the internal memory of the Bluetooth module of old profiles and caching errors. Usually the process is: place both earphones in the case, open the lid and press the touch areas or physical buttons for 10-15 seconds before changing the color of the indicator.
⚠️ Note: Do not close the charge case cover during the reset procedure and make sure the charge level is at least 30% so as not to interrupt the flashing process of the internal modules.
After a successful reset, remove the old device from the Bluetooth list in your phone’s settings and search again. Connection stability depends on the Bluetooth protocol version, so make sure that the smartphone has a modern data standard on it.
☑️ Pre-reset check
Use of Mi Buds and Xiaomi Earbuds
For deep customization of the audio profile, standard Android or iOS settings are not enough. Official utilities such as Mi Buds or Xiaomi Earbuds provide access to hidden functions that are not available through the system menu. Once the application is installed and the headset is connected, the user accesses detailed charging statistics of each channel separately.
The main function of the app is a graphical equalizer, which allows you to adjust frequency ranges. You can choose from one of the preset profiles, such as "Bas", "Vocal" or "Jazz", or create your own curve. Accurate adjustment allows you to compensate for the shortcomings of the sound of specific musical genres or hearing perception.
In addition, the application interface can reassign the actions of the touch panels. Standard configuration can be uncomfortable, for example, double-touching calls the assistant instead of switching the track. Flexibility of settings allows you to adapt the control to your own habits, assigning noise reduction or activation of game mode.
💡
Turn on the “Ear Detection” function in the application so that the music is automatically paused when you remove the earphone, which significantly saves battery power.
It is important to regularly check the update section within the app. Xiaomi engineers periodically release patches that improve the microphone’s algorithms in windy weather or fix bugs for connections to certain smartphone models.
Active noise reduction (ANC) setting
Flagship headphones are equipped with active noise reduction systems, the effectiveness of which depends on the correct calibration. ANC technology works by generating a phase-out of external noise, and to work correctly it needs to accurately determine the tightness of the landing in the ear canal. Incorrectly sized earbuds will reduce the efficiency of the system to zero.
The app often features adaptive ANC, which automatically analyzes the environment. You can adjust the transparency level to hear announcements at the station without removing the headset. Windscreen is especially useful for athletes and cyclists, as it cuts off the hums created by the flow of air.
| Mode of work | Description of function | Recommended use |
|---|---|---|
| ANC Deep | Maximum noise reduction up to 40 dB | Airplane, subway, noisy office |
| ANC Light | Slightly mutes background sounds | Cafe, quiet street, library |
| Transparency | Misses external sounds | Running outside, chatting with the cashier |
| Off | Passive noise cancellation | To save battery power |
Keep in mind that turning on the ANC significantly increases power consumption. If you're in a quiet room, it makes sense to turn off active systems to extend listening time. The microphone algorithms also change depending on the mode you choose, which affects the quality of voice transmission to the interlocutor.
Control of touch panels and gestures
Touch control is a user-device interface, and its setting directly affects user comfort. By default, sensors can be too sensitive to touch hair or the collar of clothing, or, conversely, require excessive effort. In the application, you can adjust sensitivity or turn off certain gestures.
Standard operating logic involves single, double and triple touching, and prolonged clamping. Single touch usually controls playback, double taps switches tracks, and triple calls voice assistant. Long-term clamping is most often used to switch noise reduction modes.
For gamers, signal delay is critical, so you need to activate game mode in the settings, which resets the data priorities, sacrificing some bitrate for minimal ping, but remember that this mode uses battery power faster.
⚠️ Warning: Do not tune your gestures to "hot" during an important conversation, as an accidental activation may interrupt the call or change the volume to a maximum.
If you find the standard combinations uncomfortable, try reassigning functions, for example, you can make the left earphone long-clamp switch on the voice recorder and the right one switch tracks, and this personalization makes the use of the gadget truly personal.
Secret gestures
Problems with microphone and communication quality
Quality of voice transmission is the Achilles heel of many TWS-It's a headset, but if you set it up right, it can make a lot of difference. ENC (Environmental Noise Cancellation to clean the voice from background noise, and to operate efficiently, the microphone needs access to air, so it's important to keep the nets clean.
If someone complains of a quiet voice or interruption, check the Bluetooth codec settings in the Android developer menu. Switching from an SBC codec to an AAC or aptX Adaptive can improve not only music, but also the stability of the voice channel. Some call apps have their own microphone settings that can intercept control of the system.
In windy weather, make sure to turn on the app's wind protection mode. It changes the signal processing algorithm, the cut-off vibrations that the microphone perceives as noise. Without this feature, your voice will drown in a hum, making conversation impossible.
- 🎙️ Rinse the microphone mesh regularly with a soft dry cloth as fat and dust clog the holes.
- 📶 Make sure that the Bluetooth antenna of the smartphone is not covered by your hand when talking.
- 🗣️ Speak clearly and do not cover the bottom of the headphone with your finger, where the main microphone is located.
In some cases, resetting network settings on a smartphone helps, which eliminates software conflicts of communication protocols. If the problem persists in only one application (such as Telegram or WhatsApp), look for the reason in the privacy and microphone access settings for that particular software.
Optimizing autonomy and battery care
Lithium polymer batteries used in headphones are sensitive to operating conditions. For maximum battery life, it is important to avoid deep discharge. Try to put your headphones on charge when the indicator shows about 20-30% of residual capacity, without waiting for a complete shutdown.
Temperature also plays a role. Don't leave your headphone case in direct sunlight or in the cold, because extreme temperatures irreversibly reduce the chemical activity of the battery. The optimal temperature for charging and storing is room temperature.
💡
Regular cleaning of charging contacts in the case with cotton swab ensures stable charging and prevents false readings of the charge level.
If you plan to keep your headphones off for a long time, charge them up to 50-60% and turn them off. Periodically, once a month, check the charge level and recharge the device to prevent the voltage from falling below a critical level, after which the controller can block charging.
- 🔋 Use certified cables USB to charge the case to avoid voltage surges.
- 🧼 Clean the charging contacts on the headphones themselves with an alcohol napkin once a week.
- ❄️ Avoid using headphones in the sauna or in the extreme cold below -10 degree.
These simple rules will keep the battery capacity at a high level even after two or three years of active use, remember that physical wear of the battery is a natural process, but competent operation can slow it down significantly.