The alarm clock vibe on Xiaomi is a useful feature that helps you wake up without a loud sound, especially if you are sleeping next to someone or in a public place. However, not everyone knows how to set it correctly: in some versions of MIUI, the option is hidden in the depths of the menu, and on new models (for example, Xiaomi 14 or Redmi Note 13), the activation algorithm has changed. In this article, we will examine all possible ways, from standard settings to workarounds for older versions of the firmware.
It's important to understand that the alarm clock vibration only works if you meet two conditions: the vibration mode is on in the phone settings and the alarm is activated. If the alarm does not work after setting the alarm, check if the phone is in Do Not Disturb mode or if the vibration in the sound profile is turned off. Also on some models (for example, POCO F5), the vibration may conflict with user tunes - we will discuss this separately.
1. Standard method: through the app "Clock"
The most obvious method is to set the vibration directly in the Watch app, which is the alarm clock that works on most Xiaomi, Redmi and POCO devices with MIUI 12 and later. If you have an older firmware version, move on to the next section.
Instructions:
- 📱 Open the Clock app (icon with dial).
- ⏰ Go to the Alarm tab (usually at the bottom of the screen).
- ⚙️ Click on an existing alarm or create a new one (button) +).
- 🔄 Scroll down to the Sound and Vibration block.
- 📳 Activate the Vibration switch (in some models it is called Vibrosignal).
- 🎵 If you wish, select the vibration type (e.g., “Default”, “Short” or “Long»).
If Vibration is not on the alarm menu, it can mean:
- 🚫 Vibration mode is disabled at the system level (check in Settings). → Sound and vibration).
- 🔄 You have an outdated version. MIUI (firmware update).
- 📱 The phone model does not support alarm clock vibration (rarely, but found on budget Redmi As).
Vibration mode enabled in phone settings | Alarm clock saved and activated | Phone not in "Do Not Disturb" | MIUI firmware updated to the latest version-->
2. Alternative method: through sound settings
On some devices (such as the Xiaomi 12T or POCO X5 Pro), the alarm clock vibration is tied to the general vibration settings. If the Watch app doesn't have an option, try turning it on here:
Steps:
- Open the Settings. → Sound and vibration.
- Select Vibration (or Vibration on new versions).
- Scroll to the System Vibration block.
- Make sure that options are included: 📳 Vibration when calling (affects the alarm clock indirectly). ⏰ Vibration at notifications (on some models is responsible for the alarm clock).
The clock
If the vibration never worked after this manipulation, it could be a conflict with the user's tune, for example, if you upload your music to the alarm clock, the system can automatically turn off the vibration.
⚠️ Attention: On Xiaomi with MIUI 14 When you select a custom alarm melody, the vibration is turned off by default. To return it, first set the standard signal (for example, by default), then select your melody again - the vibration option should appear.
3. For older versions of MIUI (up to 12th)
If you have a phone with a MIUI 11 or older (like a Redmi Note 8 or Mi 9), the alarm clock's vibration algorithm is different.
Step-by-step:
- 📱 Open the clock. → Alarm clock.
- ⚙️ Click on the alarm, then select Signal Settings (or Melody).
- 🔍 In the upper right corner, tap on ⋮ (three-point) → Additionally.
- 📳 Turn on the switch Vibration when triggered.
- 🔄 If you don’t have an option, try resetting your alarm settings (hold your alarm clock). → Delete → recreate).
On the Xiaomi Mi A1/A2 (with pure Android), the alarm clock vibration is adjusted through Google’s standard Watch app, where the option is called Vibrosignal and is located in the “Alarm Ring” section.
What if the vibration is working but too weak?
4. Use of third-party applications
If standard methods don't work, you can set a third-party alarm with vibration support, which is true for devices where the function is disabled at the firmware level (for example, on some POCO M-series).
| Annex | Features | Reference |
|---|---|---|
| Sleep as Android | Vibration support, smart awakening, Mi Band integration | Google Play |
| Alarmy | Vibration + tasks for waking up, even in the "Do Not Disturb" mode | Google Play |
| Timely | Vibration Customization, Cloud Backup of Alarms | Google Play |
How to set the vibration in Sleep as Android:
- Install and open the application.
- Set up a new alarm clock.
- In the alarm settings, select Vibration → Enable.
- Set up a vibration pattern (e.g., Long-Short-Long).
- Save it and check it.
⚠️ Warning: Some third-party alarms require additional permissions (e.g., Ignore battery optimization) without which they may not work. To give permission, go to Settings → Annexes → Permits → Special access → Optimize the battery and turn off the optimization for the selected alarm clock.
Standard (watches from Xiaomi)|Sleep as Android|Alarmy|Timely|Other-->
5. Challenges and solutions
Even after setting the alarm clock properly, the vibration may not work, and let's look at the typical causes and ways to eliminate them:
| Problem. | Reason. | Decision |
|---|---|---|
| Vibration doesn't work. | Phone in "Do Not Disturb" mode | Add an alarm to exceptions: Settings → Do not disturb → Allow exceptions → Alarm clocks |
| Vibration's too weak. | Limitation of the vibration motor | Use a third-party app or place your phone on a hard surface |
| No vibration option available | Outdated firmware | Update MIUI to the latest version or use a third-party alarm clock |
| Vibration works, but not regularly | Conflict with user melody | Set a standard signal, then return the custom signal. |
If none of the methods helped, check the operability of the vibromotor:
- 📞 Call your phone – if the vibration on the call is working, the problem is in the alarm settings.
- 🔧 Restart the device (sometimes helps to reset temporary crashes).
- 🛠️ In extreme cases, reset settings (but not data!) through Settings. → The phone. → Resetting settings.
💡
If the alarm clock vibration is working but you don't feel it, try putting the phone under your pillow (not on it!) and the vibration will be transmitted through the tissue and you will definitely wake up.
6. Features on different Xiaomi models
The functionality of the alarm clock vibration may vary depending on the model and version of the MIUI. Below are the key nuances for popular devices:
- 📱 Xiaomi 13/14, Redmi Note 12/13: The vibration is set directly in the Watch app, an option called Vibrosignal. Supports custom vibration patterns.
- 📱 POCO F4/F5, X5 Pro: On these models, the alarm clock vibration is tied to the general vibration settings in Settings → If the option is inactive, update the firmware.
- 📱 Redmi 10/9/8, Mi 11 Lite: On MIUI 12.5 And below, the vibration may conflict with the Energy Saving mode.
- 📱 Xiaomi Mi A3/A2 (Android One: Google's standard Watch app uses the vibration in the alarm settings called Vibrosignal.
- 📱 Black Shark (Game Smartphones): The alarm clock is turned off by default. → Additionally. → Alarm clock vibration.
On Xiaomi with MIUI for POCO (e.g. POCO X3 Pro), additional customization may be required:
- Open Settings → Additional → Features of POCO.
- Activate the option of improved vibration.
- Reboot the phone.
💡
On Xiaomi’s new flagships (series 13/14), the alarm clock vibration is synchronized with the system vibrator. If it doesn’t work, check the vibration settings in Settings → Sound → Vibration response.
7.Alarm clock vibration and Mi Band smartwatch
If you use the Mi Band 7/8 or Xiaomi Watch S3, you can set the alarm to vibrate on both the phone and the bracelet.
Instructions for Mi Band:
- 📱 Install Mi Fitness (or Zepp Life) for new models).
- ⚙️ Go to Profile. → The device → Alarm clock.
- ⏰ Create an alarm clock or sync it to your phone.
- 📳 Enable the Vibration option on the bracelet.
- 🔄 Make sure the phone in the Watch app also has vibration enabled.
Important: If the alarm is set on both the phone and the wristband, the vibration can go off twice with a slight delay. To avoid this, turn off the vibration on one of the devices.
⚠️ Warning: On the Mi Band 6 and older, with a low battery charge (less than 10%), the vibration of the alarm clock may not work.