Wireless headsets often experience music abruptly cut off by a battery that has run out. The question of how to view Xiaomi's headphone charge becomes critical when the device needs to be used immediately. Modern brand models like Redmi Buds or Mi True Wireless have a complex display system that isn't always obvious to a new user.
There are several ways to monitor energy resources, depending on your smartphone’s operating system and Bluetooth protocol version. The accuracy of the data can vary depending on whether you use the standard Android menu, iOS or specialized utilities.
In this article, we will take a look at all the validation methods available, from standard widgets to hidden engineering menus, and learn why numbers can differ across devices and how to interpret the flashing of indicators correctly on a case.
Checking the charge level on Android through widgets and menus
Android, especially in the MIUI shell, HyperOS or cleaner versions, provides native support for battery profiles for headsets. Once Xiaomi successfully pairs with a phone, the system automatically reads data from the headphone power controller. Most often, information is displayed in the notification curtain or on the lock screen.
To get more information, many users install widgets on the desktop, which allows you to see the current percentage of charge of the left and right channel, as well as the case itself, without unlocking the phone. It is important to note that the update is not in real time, but with a slight delay when you open the case lid.
💡
Widgets consume the extra battery life of a smartphone, so only activate them if constant monitoring is critical to your use case.
If the standard menu doesn’t display percentages, it’s possible that Bluetooth’s “Show Charge Level” feature is disabled, and you should also make sure that the headset is connected as an audio device, not just as a headset for calls.
Use of Mi Home and Xiaomi Earbuds
For owners of the Xiaomi ecosystem, the most accurate source of information is the official Mi Home app or specialized Xiaomi Earbuds. These utilities allow you not only to see the exact percentage of charge, but also to adjust the behavior of indicators.
The interface displays a graphical representation of each headphone's battery status separately, which is especially useful because it often desynchronizes when one channel discharges faster than another due to usage or factory defects, and calibration in the app helps the system predict the rest of the operating time more accurately.
In addition, you can update your firmware through the app, which often fixes errors in the charging algorithms, and if you notice that the percentages jump or the device shuts down by 20%, the software update is the first step to solving the problem.
☑️ Set-up of monitoring in the annex
Features of the indication on iPhone and iOS
Apple users can also monitor power levels, although the integration is less profound than with AirPods. Once the Redmi Buds or other models pair with the iPhone, the Battery widget in the notification center begins to display the charge of the connected accessories.
Often, iOS displays a total case charge or averaged value, which can be misleading. For detailed information, it is recommended to use third-party apps from the App Store that are able to decode Bluetooth data packets.
Why is the iPhone not visible charge case?
It should be borne in mind that the widget on the iPhone may not be updated until you open the case cover next to the unlocked phone. This is a feature of the background processes in iOS, aimed at saving energy from the smartphone itself.
Decoding of light indication on the case
When a smartphone is unavailable or discharged, the main source of information is the LED indicator on the case. The color and frequency of blinking carry specific information about the state of the battery. Understanding these signals allows you to navigate without additional devices.
Usually white or green means high charge (over 50-60%), orange or yellow means medium (20-50%), and red signals critically low. Blinking modes also vary: constant burning when the lid is closed usually indicates the status of charging the case itself, and short-term sunbathing when opened is the remaining energy.
| Color of indicator | Mode of work | Value of charge level | Action. |
|---|---|---|---|
| White (permanent) | Case closed, on charge. | 100% (case charged) | You can disconnect from the network. |
| Orange (blinks) | Headphones in the case | Low charge (< 20%) | Urgent charging required |
| White (flashes) | Opening the lid | High charge (> 60%) | Ready to go. |
| Orange (flashes out) | Opening the lid | Medium/Low charge | It's desirable to charge |
Always check the indication in normal light for proper color interpretation.
💡
Light indication is an analog method of estimating that does not give exact percentages, but is great for quickly assessing the need for charging.
Voice notifications and system sounds
Many modern Xiaomi and Redmi models are equipped with voice-activated features, and when you remove headphones from a case or when your energy level is critically reduced, the built-in speaker pronounces status in English or Chinese, phrases like "Battery low" or "Power on" help you navigate without looking at the screen.
The volume and presence of these notifications are often adjusted through the app or reset to factory settings. If voice prompts are annoying, they can be turned off, but then the control of charge will completely fall on the visual indicators or smartphone. Language localization depends on the regional version of the device.
There are also system sounds on the smartphone itself that warn of the discharge of the connected Bluetooth device, usually a standard soundtrack of Android or iOS, which appears when the charge drops below 10-15%.
Diagnostics and Resolve Display Problems
There are times when percentages are not displayed correctly, for example, the phone shows 80%, and the headphones turn off after 5 minutes, this indicates that the controller is out of sync or calibrated, first of all you need to perform a full charging cycle: discharge the devices to zero and charge to 100% without interruptions.
⚠️ Warning: Do not leave fully discharged headphones for long-term storage. Lithium polymer batteries can go into a deep discharge and stop perceiving charging if the voltage drops below a critical threshold.
If calibration doesn’t work, try forgetting the device in your Bluetooth settings (Settings → Bluetooth → Find the device → Forget) and pairing again, which will clear the profile cache and force the system to re-interview the battery.
In rare cases, the problem lies in the oxidation of contacts on the headphones themselves or inside the case. Wipe the metal contacts with a dry soft cloth or cotton swab slightly moistened with alcohol, making sure that the devices are turned off.