The Chinese giant’s modern wireless headphones have become the benchmark for price-performance in the consumer electronics market, with many first-time buyers facing questions about connecting, adjusting touch controls and optimizing work with a smartphone. Understanding the basics will allow you to unlock the full potential of an audio device and avoid typical operating errors.
In this article, we will take a look at how to use Xiaomi headphones, from the moment of unpacking to fine-tuning the equalizer through specialized applications. You will learn about hidden functions, ways to extend the life of the battery and methods to eliminate common problems with sound or connection. Proper tuning from the beginning will ensure comfortable listening to music and a long life of the gadget.
First Enabling and Coupling with the Device
The initial setup process usually takes no more than a couple of minutes, but requires care. After unpacking, you need to remove the True Wireless headphones from the charging case. In most models, such as the Redmi Buds or Mi True Wireless Earbuds, they automatically go into pairing mode on the first extraction, as evidenced by a flashing indicator.
If the automatic search does not start, you will need to manually log in to Pairing Mode mode, press and hold the function button on the case case case or touch the touch areas on the headphones themselves until the indicator flashes quickly in white or blue, a signal that the device is ready for detection by external gadgets.
Next, on a smartphone or tablet, you need to activate the Bluetooth module and select the name of your model from the list of available devices. In some cases, you may need to confirm the pairing through a pop-up on the Android or iOS screen. A successful connection is usually accompanied by a voice notification “Connected” or a characteristic beep.
- 🔋 Remove both headphones from the case at the same time to activate the synchronization mode between the channels.
- 📱 Make sure that Bluetooth on your smartphone is on and visible to other devices.
- 🎧 If you have problems with connection, reset the headphone settings by pressing the button on the case for 10 seconds.
- 🔄 If a device is found but not connected, remove it from the list of previously used devices and try again.
⚠️ Warning: Do not try to charge the case if the indicator is lit red immediately after the headphones are removed - this may indicate a deep discharge of the lithium polymer battery, which takes time to "swing".
☑️ Checking before first use
Managing gestures and sensory areas
The main interaction with the headset is through touch panels located on the outside of the case. The control logic may differ depending on the series, but the basic principles remain similar. Single touch is most often used to control playback or response to an incoming call, while double or triple switches tracks.
Many models have long-term touch-sensitive retention to adjust the volume, such as holding the left earphone down and the right earphone up, and it's important not to put too much physical effort, because the surface responds to light touch with your finger rather than pressing.
Some advanced models support voice assistant calls, usually activated by a triple touch or a special combination, which can be found in the instructions for a specific Xiaomi model, and the correct use of gestures allows you to completely control listening without taking the phone out of your pocket.
- 🎵 Single touch: start/pase of track or reception of call.
- ⏭ Double touch: move to the next track or repeat the previous one.
- 📞 Holding 2 seconds: Rejecting a call or activating a voice assistant.
- 🔊 Long-term retention: Volume level adjustment (in supported models).
It's worth noting that sensor sensitivity can vary, and if you find that headphones respond to random touches when you adjust your hair or wear a headgear, it makes sense to re-engineer the device in your ear.
💡
Use different size silicone nozzles from the kit to ensure a tight fit, which will not only improve sound, but also prevent the sensor from accidentally triggering vibrations when walking.
Use of the Xiaomi Earbuds app
For full disclosure of functionality, it is highly recommended to install the proprietary application Xiaomi Earbuds (or Mi Buds for older models). This software package allows not only to track the battery charge of each headphone individually, but also to adjust the behavior of touch control.
The app menu offers an equalizer with presets and manual frequency tuning, a critical tool for those who want to adapt the sound to their musical genre, and a headphone search feature that makes a loud signal if you lose one nearby.
One key feature is firmware updates. Manufacturers regularly release patches that improve connection stability and noise reduction quality. Ignoring updates can result in you not getting access to new features or bug fixes.
| Function of the annex | Description of the opportunity | Availability |
|---|---|---|
| Transparency regime | Increase external sounds for conversation | Models Pro |
| Low Latency Mode | Reducing Sound Delay in Games | All models. |
| Dual connector | Connecting to two devices at once | Flagships |
| Voice control | Setup of assistant and teams | All models. |
Active noise cancellation and sound modes
Flagship models are often equipped with an active noise reduction system (ANC), which uses microphones to analyze external noise and generate antiphase, which allows you to effectively cut off the hum of a transport or office, and you can activate this mode through an application or a special sequence of touches.
But using ANC can significantly increase your energy consumption, and if you're in a quiet room, you'd better switch to Transparency or regular listening, which will save battery power and reduce the load on the electronics of the device.
Also worth mentioning is the gameming mode, which prioritizes the speed of audio transmission, which minimizes the desynchronization of sound and image in games, which is optional for music and can even slightly degrade the decoding quality for speed.
⚠️ Attention: In active noise reduction mode, microphones can pick up strong winds, creating an unpleasant hum. In windy weather outside, it is better to switch to transparency mode or turn off. ANC.
How does adaptive noise reduction work?
Connection problems and their solution
Even high-quality devices can experience disruptions, and the most common problem is to de-synchronize the left and right channels, where the sound comes from only one earbud, and this is solved by a complete reboot: put both earbuds in the case, close the lid, wait 10 seconds and remove them simultaneously.
If the problem persists, do a full reset, usually by placing the headphones in the case, opening the lid and pressing the reset button for 15-20 seconds until the indicator flashes several times, and then you need to re-pair the smartphone, removing the old device from the Bluetooth list.
Interference can occur due to congestion of the Wi-Fi radio channel or the presence of powerful radiation sources nearby, in such cases, it is worth moving away from the router or microwave oven, and also check if the phone has power saving for Bluetooth, which may limit the operation of the module.
- 📡 Make sure there are no thick walls or metal barriers between the phone and headphones.
- 📱 Reboot the Bluetooth module on your smartphone (turn off/on).
- 🧹 Clean the charging contacts in the case with a dry cotton swab - oxidation interferes with work.
- 🔄 Remove the device from the phone’s memory and pair again.
In rare cases, the problem may be in the version of the smartphone operating system. Outdated versions of Android or iOS may not work properly with new audio codecs, requiring an update of the phone's software.
Care, charging and extension of service life
Wireless headphones require regular maintenance to maintain hygiene and sound quality. Speaker nets become clogged with earwax over time, which silences high frequencies. Use a soft dry brush or a slightly damp (not wet!) wipe to clean.
Regarding charging, lithium polymer batteries do not like to fully discharge "to zero." Try to put the case on charge when the indicator shows about 20-30% of the balance. Using the original cable or certified analogues with a current of no more than 1A (unless otherwise indicated) will protect the power controller.
Store the device in a dry place, away from direct sunlight and heat sources. High temperatures destroy the chemical structure of the battery faster than charge-discharge cycles. With proper care, high-quality Xiaomi models can delight with great sound for several years.
💡
Cleaning speaker grids and charging contacts regularly is the easiest way to avoid 80% of sound and connection issues.
⚠️ Warning: Never use sharp objects (needles, toothpicks) to clean the speaker mesh.Putting the membrane is very easy, resulting in irreversible sound damage or complete failure.