How to use Xiaomi Mi True Wireless Earbuds Basic 2 headphones

Modern wireless headsets have become an integral part of everyday life, offering freedom of movement and high-quality sound without unnecessary wires. Xiaomi Mi True Wireless Earbuds Basic 2 is a popular budget solution that combines compactness, autonomy and ease of use. However, like any technical device, these headphones require the correct initial pairing and tuning for the correct operation of all functions.

Many users have difficulty first turning on or don't know how to activate the voice assistant and switch tracks. Incorrect pairing sequences often lead to left-right channel dissynchronization. In this article, we'll take a look at all aspects of operation so you can make the most of your headset.

Note that the stability of the connection depends on the battery charge and distance to the smartphone. Bluetooth protocol used in this model provides reliable data transfer, but requires compliance with certain conditions. Let's consider the process of preparing the device for the first launch.

Primary activation and preparation for work

Before you try to connect your phone to your phone, you need to make sure it's ready to go. New devices often come with a partially discharged battery, so the first step is to fully charge, insert both earbuds into the charge case and connect it to the power source via a Micro-USB cable.

The display on the front of the case will help determine the status of charging. Usually, red light signals the process, and turning it off or changing the color indicates a full charge. It is important to use a serviceable cable and an adapter with a current of no more than 1A so as not to damage the power controller.

After charging, remove both headphones from the case at the same time, they should light up indicators that usually flash white or red, indicating the transition to pairing mode. If the indicators do not light up, try to wipe the contacts on the headphones themselves and inside the case with dry cloth, as oxidation can interfere with charging.

The process of pairing with a smartphone

The main stage of setup is to create a connection between the headset and your mobile device. TWS-It has its own nuances, but open the Bluetooth settings on your smartphone and turn on the search for new devices.

The list of devices available for connection should appear Mi True Wireless EBs Basic 2. Click on it to begin the mating process. Successful connection is usually confirmed by a voice message "Connected" or a characteristic beep in the ears.

⚠️ Note: If you see two identical device names on the Bluetooth list, it means that the headphones are out of sync with each other, in which case you need to perform the reset procedure described below so that they again work as a single stereo system.

Sometimes a smartphone may request a pairing confirmation or code. The standard pin code for devices of this type is often 0000, but in most modern Android and iOS systems, the connection is automatically without entering numbers. Once successfully communicated, the device will be stored in the phone's memory for future connections.

Touch control and voice assistant

Playback and call control is done by touch panels located on the outside of each earpiece, pressing lightly and shortly, without much pressing, as there is no mechanical click, touch area responds to touch, allowing you to control music and calls.

• 🎵 One touch: pause or replay/response to incoming call.
• 📞 Double touch (right earphone): re-dialing the last number.
• 🗣️ Triple touch (left earphone): activation of the voice assistant (Google Assistant, Siri).

To complete a conversation or reject an incoming call, you need to hold your finger on the touchpad for about two seconds.This action can also be used to turn off the device if you hold the button longer. The functionality of the left and right headphones can vary depending on the firmware version.

Table of major control commands

For easy memorization of action combinations, the following is a summary command table that will help you navigate quickly without having to look for instructions every time, and remembering these patterns will make you as comfortable as possible using the headset.

It's worth noting that volume control on this model is not implemented through headphones, but through a smartphone. This is a common practice in the budget segment, where the chipset is limited in the number of commands supported. Use the physical buttons of the phone or the sidebar to change the sound level.

Resetting settings and eliminating desynchronization

One of the most common problems owners Xiaomi Mi True Wireless Earbuds Basic 2 is the desynchronization of channels, when the sound plays in only one ear or devices can not see each other, in which case you need to perform a forced reset (Hard Reset), which will return the factory settings and clear the memory of previous connections.

The reset procedure requires precise sequence. First, remove the device from the Bluetooth list on the phone ("Forget the device"). Then place both earbuds in the case, but don't close the lid immediately. You'll need to remove them and simultaneously clamping the touchpads.

1. Remove the phone from Bluetooth.


2. Put it in the case.




3. Get both earphones out.




4.Clamp the sensors for 5-7 seconds before red flashing.




5. Put it back in the case.

⚠️ Warning: During reset, the indicators may flash red several times. Do not release the headphones or hide them in a case until the blinking cycle is complete, otherwise the procedure will not be completed until the end of the blinking cycle.

Once the lights go out or stop flashing, put the headset back in the charge case for a few seconds. Then remove them again — they must automatically reconnect to each other (one of the indicators will flash slowly, waiting for the phone).

Operational features and care

To extend the battery life and maintain sound quality, you should follow simple rules of operation. Lithium polymer batteries used in case and headphones are sensitive to extreme temperatures. Do not leave the device in direct sunlight or in the cold.

Clean the speaker mesh regularly of earwax and dust using a dry soft brush. Clogged holes can significantly reduce volume and worsen the bass response. Also wipe the charging contacts in the case, as moisture or dirt can lead to oxidation and failure of charging.

💡

If one earphone is discharged faster than the other, try discharging them completely (before turning them off) and then charging them to 100% in the case without interruption.

The moisture protection of the model is limited, so you should not use them during intensive training with heavy sweating or in the rain.

Frequently Asked Questions (FAQ)

💡

Proper care of charging contacts and regular resets for communication problems are key to a long and stable operation of your TWS headphones.