Xiaomi’s modern wireless headphones have become the benchmark for affordable sound, offering users excellent audio quality and stable connection. The activation process is usually easy, since the Mi ecosystem is focused on maximum automation. However, when you first activate or change the main device, users may face the need to manually enter the gadget into pairing mode.
In this article, we will discuss in detail all the nuances of connecting a headset to Android and iOS smartphones, as well as personal computers. You will learn how to properly reset the Bluetooth module settings if the device stops seeing headphones, and what hidden functions are available to owners of the original products of the brand.
The correct sequence of actions will avoid most common errors associated with channel desynchronization or low charge level, and the stability of the connection depends on the correctness of the steps taken during the initial stage of setting up your audio device.
Preparation of headphones and smartphone for pairing
Before starting any synchronization procedure, make sure that both devices are ready to go.First check the battery level in the case and the headphones themselves, as in Low Battery mode, the Bluetooth module may not work stable or at all. Put the headphones in the charging box and connect it to the power source for 15-20 minutes if you are not sure about the power balance.
Next, you should free your smartphone from old connection profiles if you have previously used these headphones with another phone or tablet. Go to your mobile device's Bluetooth settings, find your model name (e.g. Redmi Buds 3 Pro) in the list of previously connected gadgets, and select the "Forget device" or "Unpair" option.
Make sure your smartphone has a wireless module on and is in visibility mode for other devices.Sometimes, Android or iOS may be “hanging” in search, so it’s a good idea to turn off Bluetooth, wait 5 seconds, and turn it on again to update the list of available networks.
⚠️ Note: Do not remove the headphones from the case until you are ready to press the pairing button, otherwise they may automatically connect to the last known device in range.
It is also important to check the version of your smartphone operating system. High-quality codecs such as AAC or aptX Adaptive require an up-to-date version of your phone’s firmware to work properly.Outdated software can limit the functionality of the headset or cause audio delays.
Step-by-step instructions for connecting to Android and iOS
The process of activating pairing mode may vary slightly depending on the specific Xiaomi or Redmi headphone model. Most modern versions, such as the Mi True Wireless Earbuds Basic 2 or Redmi Buds 4, use touch controls or physical buttons on the case case case case to enter detection mode.
- 🎧 Remove both earphones from the charging case at the same time to activate them.
- 🔘 Press and hold the touch zones on both headphones during the 3-5 seconds before the indication appears.
- 📱 Open Bluetooth settings on your phone and click “Search for new devices».
- ✅ Select the name of your model in the list that appears to complete the connection.
If your case has a separate function button (usually located on the back wall or inside the compartments), the algorithm of actions is simplified: you need to place the headphones inside the case, leave the lid open and press the button until the LED indicator begins to flash quickly white.
For users of Apple devices (iPhone, iPad), the process is almost identical, but it is worth considering the features of iOS. The system can request permission to use the microphone and geolocation for accurate location, which is necessary for the function “Find the device”. Once all requests are confirmed, the sound must appear in the headphones.
☑️ Checking before connection
Xiaomi and Redmi smartphones with MIUI or HyperOS shells are the luckiest. When you open the case cover next to the smartphone, an animated window with the charge level of each earpiece and case automatically pops up on the screen. This is the proprietary Fast Pair technology that greatly speeds up the setup process.
Using the Xiaomi Earbuds app to customize
To unlock the full potential of your wireless headphones, it is highly recommended to install the Xiaomi Earbuds app (formerly known as Mi True Wireless), which is available on the Google Play Store and Apple App Store, and can also be built into the system settings of the brand’s phones.
Once you install the app and provide the permissions you need, you can access an extended control menu, where you can not only track the charge, but also adjust the equalizer, change the assignment of touch commands and update the firmware of the headphones. Regular firmware updates fix bugs and improve the quality of noise reduction.
| Function in the annex | Description of possibilities | Availability |
|---|---|---|
| Noise reduction modes | Switch between ANC, Transparency, Off. | All models with ANC |
| equalizer | Frequency settings: Bass, Vocals, High | All models. |
| Headphone search | Audible signal for searching indoors | All models. |
| Update of the PO | Installation of new versions of firmware | All models. |
In the Touch Settings section, you can reassign actions, for example, double tapping can trigger tracks, and long-term retention can activate the voice assistant or switch noise reduction modes, which allows you to adapt the control to your habits without having to pull out the phone every time.
Why update the headphone firmware?
Connection to computer, laptop and Smart TV
Using Xiaomi headphones with a PC or TV requires you to put the headset into forced pairing mode, since these devices do not support automatic recognition, typical for smartphones. On Windows 10 and 11 computers, the process begins with opening Bluetooth parameters through the notification bar or the Start menu.
On Android TVs or Google TVs, the way to set up is usually through the Settings menu → Remotes and Accessories → Add Accessory. For Mi TVs and Redmi TVs, the algorithm is similar. The main thing is to make sure that the TV is close enough to the case with headphones.
- 💻 On PC, click “Add Bluetooth or other device” and select “Bluetooth».
- 📺 On the TV, start searching for new devices in the corresponding menu.
- 🎧 Transfer the headphones to pairing mode (flicker indicator).
- 🔗 Select the device in the list on the TV or monitor screen.
It is worth noting that when connecting to Windows, codecs can be problematic. By default, the system often uses an SBC codec that provides average sound quality. To improve the situation, you can try manually switching the codec in hidden developer settings or through third-party utilities, if your card's Bluetooth drivers allow it.
⚠️ Note: When connecting to a smart TV It's normal for Bluetooth protocol, but the settings on the TV often have a Game or Low Latency mode, which helps synchronize audio and video.
Solution: Headphones are not connected or visible
The situation when the phone does not see the headphones or the connection is constantly breaking is one of the most common. Most often, the problem lies in the fact that the headphones are already connected to another device in the background. Bluetooth protocol is prioritized to connect to the last active gadget, ignoring new requests.
Another reason could be the overflowing memory of the pairings on the headphones themselves. If you changed your phones often, the headset could have "remembered" too many devices, in which case you need to perform a full factory reset. For most Xiaomi models, this is done by putting the headphones in the case, opening the lid and holding the button on the case (or touch areas on the headphones) for 10-15 seconds before changing the color of the indicator.
Also worth noting is interference on the air. 2.4GHz Wi-Fi routers, microwave ovens, and other wireless devices can interfere. Try to step away from the router or turn off other Bluetooth gadgets for a while.
If nothing works, try forgetting the device on your phone, turning off Bluetooth, restarting your smartphone, and then re-pairing it again. Often, a simple reboot of the operating system clears the Bluetooth stack cache and solves the problem.
Specifics of working with different models of Redmi and Mi
Different generations of headphones have their own controls, for example, the Redmi Buds 3 Lite series has no customization app and all control is done via the standard Bluetooth menu. whereas the flagship Mi True Wireless Earphones 2 Pro supports wireless charging and has complex sensor logic.
It's important to distinguish between mono and stereo. Some older models allow you to use only one headphone independently, while newer ones require you to remove both to activate. If you only have one headphone, put both in the case, close the lid, wait 10 seconds and pull it out again.
A critical point for active noise cancellation (ANC) models is the adhesive density of the earpieces. If the earpiece sits leaky, the ANC system may not work properly, creating a whistle or a hum, as well as deteriorating the quality of the basses.
💡
Wipe the charging contacts on the headphones with a dry cotton swab once a month. Oxidation of the contacts can cause the earphone to not charge in the case and therefore not turn on.
Understanding the specifics of your model will avoid false conclusions about the malfunction, carefully study the instructions included, or use the digital guide in the application to find out the exact sequence of actions to reset or flash your device.
Optimizing sound and eliminating delays
Sound quality is a subjective parameter, but the technical aspects can be improved. In the Xiaomi Earbuds app, experiment with equalizer settings. Low frequency amplification is often suitable for pop music and electronics, and for podcasts and audiobooks, human voice or high frequencies mode.
Latency is especially noticeable when watching videos or games. To minimize this effect, try to keep the phone in your pocket or on the table next to you, without putting it far into your bag. Direct visibility between the phone's antenna and headphones provides the best signal.
Some users note the improvement in stability after disabling the “Absolute volume” function in the Android developer menu, although this depends on the specific version of the OS. It is also worth turning off the power saving for the app that manages the headphones so that the system does not “kill” the data transfer process in the background.
💡
The quality of Bluetooth communication depends not only on the headphones, but also on the version of the Bluetooth module in your smartphone and the presence of interference in the air.