How to connect the soundbar to the TV Xiaomi Mi: all ways with photos and videos

Connecting the soundbar to a Xiaomi Mi TV is a challenge faced by smart TV owners who want to improve the sound of movies, music or games. Even low-end soundbar models like Xiaomi Mi Soundbar or Redmi Soundbar can dramatically transform acoustics compared to built-in speakers, but not everyone knows that there are at least five ways to synchronize devices, from the classic one to the traditional one. HDMI ARC to wireless Bluetooth, and each has its own nuances.

In this article, we will discuss all current methods of connection, including those rarely mentioned (for example, through the use of a new system). USB-C on new Mi models TV Q2), And also, you know, the common bugs that make the sound not work, and we're going to focus on setting up the sound profiles in the audio format. MIUI TV — If you don't, even a properly connected soundbar won't reach its potential. If you've tried connecting devices before, but you've encountered a problem (no sound, no delay, no crackling), at the end of the article, you'll find that you've got a problem. FAQ-solution-box.

1.Preparation: What will be needed to connect

Before you start connecting the soundbar to the Xiaomi Mi TV, check for all the necessary cables and adapters. The list depends on the chosen connection method, but there is a universal set that will come in handy in 90% of cases:

• 🔌 HDMI-cable 1.4 or higher, for HDMI ARC/eARC) — If you want to send a high quality sound (Dolby Atmos, DTS:X).
• 🎧 Optical cable (TOSLINK) — for digital sound without interference (suitable for Mi models) TV 4S/4A).
• 🔊 Audio cable 3.5 mm (AUX) — universal option for analog connection (available on all soundbars).
• 📶 Bluetooth adapter (if the soundbar does not support Bluetooth, but there is one) AUX-entrance is rare, but sometimes used.
• ⚡ Power supply for soundbar (if it doesn't work from the USB television).

Also make sure your Xiaomi Mi TV supports the type of connection you choose, HDMI ARC Only in the Mi models are there. TV Q1/Q2, Mi TV 4X 55" and newer, and optical output is missing in Mi TV Stick and some budget series. To make no mistake, check the specifications of your model on the official website or in the instructions.

⚠️ Note: If you connect the Xiaomi Mi Soundbar soundbar to a TV of the same brand, use the branded cable from the kit - it is optimized for transmitting sound without delay through the TV. MI Link (Wireless Synchronization Technology of Xiaomi Ecosystem Devices).

Before starting work, disconnect both devices from the network - this will prevent possible failures during the first connection, we also recommend updating the TV firmware to the latest version (current for 2020 models and newer), as in older versions. MIUI TV There could be bugs with sound through HDMI ARC.

2. Method 1: Connecting through HDMI ARC (Best option for sound quality)

HDMI ARC (Audio Return Channel – the most modern and reliable way to connect the soundbar to Xiaomi Mi TV. It allows you to transmit sound in high resolution (up to Dolby Atmos), control the volume from the TV remote and avoid delays (limps). ARC eARC (improved version).

Instructions for connection:

1. Find the port on the TV. HDMI ARC — It is usually signed with the corresponding inscription (on models Mi). TV Q2 it's a connector HDMI 1).
2. Connect TV and soundbar HDMI-cable (it is important to use a cable version 1.4 or higher).
3. Put both devices on the network.
4. On the Xiaomi Mi remote TV Press the Home button, then go to Settings. → Sound. → Sound output.
5. Choose HDMI ARC as your sound source.
6. On the soundbar, activate the mode HDMI IN (This is usually done by the source or input button).

If the sound doesn’t appear immediately, check:

• 🔄 Correct cable connection (try to reconnect it on both sides).
• 🔊 Volume settings on the soundbar (sometimes by default it is at a minimum).
• 📺 Version HDMI-Port on TV (on older Mi models) TV 3 ARC may not be supported).

TV and soundbar included in the network|Cable connected to port HDMI ARC|In the sound settings selected HDMI ARC|Soundbar's got a mode activated. HDMI IN-->

Important: On Xiaomi Mi TVs TV Q1E and Q2E (2023) for the correct operation HDMI ARC need to turn on the option CEC Control in the menu settings → System system → Device management. Without that, volume synchronization won't work.

⚠️ Note: If, after connecting through HDMI ARC the sound is late (Lip), try to turn off the sound processing in the settings of the TV: go to Settings → Sound. → Additionally. → Sound processing and select Off... This is a common problem on Mi models. TV 4A firmware older than 2021.

Method 2: Connection via optical cable (TOSLINK)

Optical cable (aka: TOSLINK) — The second most popular way to connect the soundbar to Xiaomi Mi TV. It delivers digital audio without loss of quality, but does not support some modern formats like Dolby Atmos (Dolby Digital only or Dolby Digital). DTS). But the optical connection is resistant to interference and is suitable for long distances (up to 10 meters).

How to connect:

1. Find the optical output on the TV – it looks like a square connector with a red LED inside (on the Mi models). TV 4S mi TV 4X It's on the back).
2. Connect one end of the cable to the TV, the other to the entrance OPTICAL IN soundbar.
3. Turn on both devices.
4. On the TV, go to Settings. → Sound. → Output of sound and select Optical (S/PDIF).
5. On the soundbar, activate the mode OPTICAL (usually with a source button).

If there's no sound, check:

• 🔦 Clean connectors (dust or dirt can block the signal).
• 🔄 Correct connection (cable must enter before clicking).
• 📺 The sound format in the settings of the TV (sometimes you need to manually select) PCM auto).

The optical cable is ideal for watching movies and listening to music, but not suitable for games - due to sound processing, there can be a delay of up to 100 ms. HDMI ARC Bluetooth (with support for aptX Low Latency).

💡

If the optical cable does not fit tightly into the connector, do not press with force - check if the sides are mixed up (one side of the cable can be with a square tip, the other with a round one).

4. Method 3: Connecting through AUX (3.5 mm) - universal, but not ideal

AUX-Connection (via 3.5 mm audio jack) is the simplest and most versatile method that works with even the oldest models of soundbars and TVs Xiaomi Mi. However, it has two significant disadvantages: first, it transmits an analog signal, which means possible interference and loss of quality; Secondly, you will have to control the volume separately on the TV and soundbar.

Step-by-step:

1. Find an exit on the TV. AUDIO OUT (3.5 mm) – it is usually located on the back or side panel (on the Mi TV 4A may be concealed under a cover).
2. Connect TV and soundbar AUX-cable (insert the plug to the end).
3. Turn on both devices.
4. On the TV, go to Settings. → Sound. → Output and select Audio output (3.5 mm).
5. On the soundbar, activate the mode AUX IN (sometimes referred to as LINE IN).

Advice for setting up:

• 🎛️ Set the volume on the TV on 70-80%, a further adjustment to perform on the soundbar - this will reduce the noise level.
• 🔇 If background noise is heard, try using a cable with gilded connectors or a screen.
• 🔄 If the sound is only in mono, check if the cable plug is bent (a common problem with a sloppy connection).

⚠️ Attention: On the TVs Xiaomi Mi TV P1 mi TV 5 3.5mm audio output only works when the built-in speaker is disabled. To deactivate it, go to Settings → Sound. → Television speakers and select Off..

AUX-The connection is suitable for temporary use or if other methods are not available. HDMI ARC or optical cable, especially if you have surround soundbar.

5. Method 4: Wireless connection via Bluetooth

Connecting the soundbar to Xiaomi Mi TV Bluetooth is convenient for the lack of wires, but has limitations: there are possible delays in sound (lips), and the quality depends on the version of Bluetooth and supported codecs. TV Q2 Bluetooth-equipped 5.0 It supports aptX, which minimizes delays, but on Mi. TV 4A (Bluetooth 4.2) The sound may be behind the picture. 100-200 miss.

How to connect:

1. Turn on Bluetooth mode on the soundbar (usually by holding the Power or Source button).
2. On the TV, go to Settings → Devices → Bluetooth.
3. Click Add Device and select your soundbar from the list.
4. Confirm the pairing (may require input) PIN-code, usually 0000 or 1234).
5. Back to Settings → Sound. → Output audio and select Bluetooth audio.

If the sound is interrupted or delayed:

• 📶 Reduce the distance between the TV and the soundbar (maximum) 5-7 meters).
• 🔄 Reconnect devices (sometimes it helps to reset a Bluetooth module on your TV).
• 🎵 In the soundbar settings, select Game or Low Latency mode (if any).
• 📵 Disable other Bluetooth devices (earphones, smartphones) that may interfere.

Bluetooth is ideal for listening to music or podcasts, but not for games or movies with dynamic sound.If delays are critical, try alternative methods (e.g., play with your video game or movie, HDMI ARC or USB-C new-model).

💡

For minimal delays when connecting to Bluetooth, use a soundbar and TV with support for aptX Low Latency or LC3 (starting with Bluetooth 5.2).

Method 5: Connecting through USB-C (For new models Xiaomi Mi TV)

Some modern Xiaomi Mi TVs (e.g. Mi TVs) TV Q2 2023 or Mi TV A Pro) equipped with a port USB-C, It's a technique that can transmit sound digitally, which is not yet widely used, but it has the potential because it's simple and it doesn't have any delays. USB-C, The TV must recognize the device as an audio output.

Instructions:

1. Check if your soundbar has an entrance. USB-C or USB-B (Sometimes an adapter is required).
2. Connect TV and soundbar with cable USB-C — USB-C (or USB-C — USB-B adapter-wise).
3. On the TV, go to Settings. → Sound. → Sound output.
4. Choose. USB-audio (if you don’t have this option, try digital output).
5. On the soundbar, activate the mode USB or PC.

Limitations of the method:

• 🔌 It only works with soundbars that support USB-audio (e.g. Xiaomi Mi Soundbar Pro or Creative Stage Air).
• 📵 Not all Xiaomi Mi TVs can produce sound through the phone. USB-C (Check the specifications of the model).
• 🔊 There may be problems with volume - sometimes the sound is too quiet or, conversely, distorted.

If your TV doesn't recognize the soundbar USB-C, try to use OTG-adapter (e.g, USB-C → USB-A) And you can connect the soundbar as an external sound card, and this method requires you to manually tune it into the soundbar. MIUI TV It is suitable only for experienced users.

7.Tune the sound after connecting the soundbar

Even after a successful connection, the soundbar may not sound as you would expect, because Xiaomi Mi TVs are default optimized for built-in speakers, and their audio profiles are not always suitable for external speakers. To unlock the soundbar's potential, make the following adjustments:

Selection of sound profile:

• 🎬 Movie - enhanced low-frequency range (suitable for movies).
• 🎵 Music – Balanced sound with an emphasis on the middle frequencies.
• 🎮 Playing - minimal delays, but reduced bass quality.
• 🗣️ Speech – Emphasized voices (useful for news or podcasts).

Equalizer setting:

Go to Settings. → Sound. → Equator and manually adjust sliders:

- Increase 100Hz for bass.

- Reduce. 2-4 qHz if voices sound too harsh.

- Lift up. 10-12 kHz for high-frequency brightness.

3. Enabling surround sound (if supported):

On the Mi models TV Q2 mi TV P1 optional:

- Dolby Audio (in the Settings menu) → Sound. → Additionally).

Virtual Surround (imitation of surround sound for soundbars without Dolby support).

If after all the settings the sound still does not suit, try to reset the sound settings to the factory: → Sound. → Resetting audio settings. This often helps with software failures, especially after a firmware update.

FAQ: Frequent Questions and Problems