The situation when the left headphone Xiaomi works properly, and the right is silent or not connected, is familiar to many owners of budget and medium audio peripherals. Often users panic, believing that the device is out of order, but in most cases the problem lies in the software failure of synchronization between channels. True Wireless Stereo technology requires the perfect pairing of both modules for correct audio transmission.
Before you bring a gadget to a service center or write a complaint to the seller, you need to eliminate software errors and try to restore communication manually. In this article, we will discuss in detail the algorithms of actions for models of Redmi Buds, Xiaomi Earbuds and other compatible devices. A critical error of 90% of users is trying to connect each earphone separately through the Bluetooth menu of the smartphone, which is strictly forbidden.
Recovery often takes less than ten minutes and requires no special equipment, you just need a charged case, a smartphone running Android or iOS, and a little patience. Let's look at the main causes of the malfunction and how to fix them.
The main reasons for the dissynchronization of the right channel
Understanding the nature of the problem is the first step to solving it. Most often, the right-hand Xiaomi earphone stops playing music because of the pair's desynchronization. The devices operate in TWS mode, where one channel (master) transmits a signal to the second (slave), and if this communication is disrupted, the sound disappears.
The second common cause is contamination of the contact areas, where the golden contacts and the recesses of the charging case accumulate earwax, dust and oxides, which causes the right module to simply not charge and go into a deep discharge, which does not turn on when extracted.
Also worth considering is the software failures of the smartphone operating system. cached data about previous connections can conflict with the current communication session. Bluetooth protocol sometimes "forgets" the priority device, switching to the phone speaker or other associated equipment.
Preparation for reconnection
Before any software manipulations, it is necessary to ensure the physical health of the components. Make sure that the case is charged at least 30-40%, since at low charge the voltage may not be enough to activate the Bluetooth module in the right earphone.
Carefully inspect contact groups. Use a cotton swab lightly soaked in isopropyl alcohol to clean. Do not use water or aggressive chemicals as this could damage Xiaomi's internal electronics.
- 🧹 Carefully wipe the contacts on the headphone itself and inside the case with a dry cloth.
- 🔋 Leave the devices in the case on 15-20 minutes to level the charge of the cells.
- 📱 Reboot your smartphone to clear temporary Bluetooth service files.
- 🚫 Make sure there are no other active Bluetooth devices nearby that may be causing interference.
☑️ Pre-reset check
⚠️ Note: If after cleaning the contacts, the indicator on the right headphone does not light up when installed in the case, perhaps the problem is hardware (a rupture of the plume or failure of the battery).
Full reset algorithm (Hard Reset)
The most effective way to get the right earbud to work again is to reset completely, which would force the old connections to break and make the two modules rediscover each other, and the process might vary depending on the model, but the basic principle is the same.
Place both earbuds in the charge case and leave the lid open. Find the function button on the case case case (usually located between the indicators or on the back wall), you need to press this button and hold it for 10-15 seconds.
Watch for the indication: LEDs should start flashing white, then quickly blinking red and white (or orange) alternately, a signal that the reset has passed successfully and the devices have switched to pairing mode.
What to do if there is no button on the case?
After a successful reset, remove the old device from the Bluetooth list on your phone, and the name may look like "Mi True Wireless EBs Basic" or "Redmi Buds." You can now start a new connection.
The process of properly pairing with the phone
Now that the devices are reset, it's important to connect correctly. Open the case lid with the headphones inside. Don't take them out right away. A pop-up window should appear on the smartphone screen suggesting you connect.
If there's no automatic window, go to Bluetooth settings manually. Your Xiaomi will appear in the list of available devices. Click on the name. At this point, the synchronization first occurs between the left and right channels, and then with the smartphone.
Make sure you connect to the primary device name, not to individual channels (e.g., the main device name,"R_Buds" or"L_Buds"). Mono mode should be excluded for stereo sounding.
| Indication | Meaning | Action. |
|---|---|---|
| White flashing | Interconnection mode | Search for the device in Bluetooth |
| Red is burning. | Low charge. | Put it on charge. |
| White burns | Connected. | We can use it. |
| Red flashing | Mistake. | Repeat the reset |
💡
If the right earphone is connected, but there is no sound, check the balance of channels in the settings of special features of your smartphone (Settings -> Special. capabilities -> Hearing -> Balance).
Use of the Xiaomi Earbuds app
For more in-depth diagnosis and customization, it is recommended to use the official Xiaomi Earbuds app (formerly known as Mi True Wireless), which allows you to see the charge of each headphone separately and update their firmware.
Often, the problem is solved by simply updating firmware. A new version of software may be available in the application that fixes known connection bugs, connect the headphones to your phone and run the update via Wi-Fi.
The app can also reset the settings by software if the physical buttons don't respond. The interface will show the status of the left-right channel connection in real time, making it easier to diagnose.
⚠️ Warning: Do not open the case cover during firmware update and keep the phone at a distance of no more than 10 cm. Interrupting the process can lead to complete inoperability of the device.
Diagnostics of hardware faults
If neither reset, nor reconnect, nor update firmware helped connect the right headphone Xiaomi, the probability of physical failure is high.
Try connecting your headphones to another smartphone. If the second device is repeating (the right channel is silent), the problem is definitely in the headset, not the phone. Also check the mono mode, leaving only the right earpiece in the case.
In some cases, it helps to "swing" the battery: leave the case with headphones on charge for several hours (for example, overnight), even if the indicators show a full charge, which can raise the voltage in the cell of the right module to the working level.
💡
If after all the software manipulations, the right earphone does not emit any sounds and does not respond to touch, most likely, a battery replacement or a speaker in the service center is required.