Modern wireless headphones are becoming more popular, and Xiaomi models are taking the lead due to excellent price-performance ratio. However, initial configuration or re-pairing of the device sometimes raise questions among users, especially if previously used gadgets from other brands. Redmi AirDots 3 (also known as Mi True Wireless Earphones 3) are equipped with an advanced Bluetooth 5.2 module, which provides stable communication, but requires the right approach to activate detection mode.
In this article, we will discuss in detail all the steps of connecting the headset to Android and iOS smartphones, as well as the nuances of working with Windows. You will learn how to properly enter pairing mode, what to do if the phone does not see the headphones, and how to perform a full reset. It is important to understand that the first turn on Redmi AirDots 3 automatically translates them into search mode, but when you connect to a new device, this process must be initiated manually.
Before you go to software settings, make sure your headphones are charged. Low charge can block the Bluetooth module or make the signal intermittent. Also, for the AAC and SBC codecs to work properly, you need to keep the distance between the phone and the case at no more than 10 meters without physical barriers. Let's look at the step-by-step algorithm for different operating systems.
Preparation for first activation and charge check
Before starting the pairing procedure, it is critical to make sure that the case battery and the headphones themselves work. New devices often come with a factory charge of about 50-60%, but with prolonged storage, the battery can run out of zero. Place both headphones in a charging case and connect it to the network via a Type-C cable. The indicator on the front of the case should light up in red, signaling the charging process.
When the indicator goes out or changes color (depending on the firmware version and case model), you can remove the headphones. When you first remove the Redmi AirDots 3 from the case, automatically turn on and go into standby mode. Note the LED lights on the headphones themselves: they should flash white, which means activation of the detection mode. If the indicators do not burn, it may be discharged or require a longer charging time.
It is worth noting that some features, such as game mode or noise control (if available in your version), may require an additional application. However, the basic connection is standard system means. Also make sure that your headphones remove protective films from the charging contact areas, if they were present there when you purchase them.
💡
To quickly check the case charge level, press the control button on the back of the case - the indicator will show the current status with one flash or a series of blinks.
Instructions for connecting to Android smartphones
Owners of smartphones Xiaomi, Redmi and POCO They have the advantage of enhanced integration with the ecosystem. When you open the case cover next to the smartphone, you can see a pop-up window with animations and the charge level of each earphone. If the automatic window does not appear, you need to go to the Settings menu. → Bluetooth and enable device search. In the list of available gadgets, find Redmi AirDots 3 and click to pair.
For users of other Android brands (Samsung, Honor, Realme), the algorithm is almost identical. Open the notification curtain, press the Bluetooth icon or go to settings. Make sure that geolocation is enabled, because in modern versions of Android (starting from 6.0 and up), this requirement is necessary for the Bluetooth device scanner to work. Once the device is in the list, click on it to establish a connection.
When you connect, the system can request a validation of the access code or simply notify you of a successful pairing. After that, the status bar will display a charge-level headphone icon. If you use a MIUI or HyperOS shell, you will have a more detailed settings menu, including reassigning buttons and selecting noise reduction mode directly from the Bluetooth widget.
☑️ Checking before connection
Sometimes the phone sees the device, but the connection does not occur or immediately breaks. In this case, try to remove the device from the list of previously connected (forget the device) and repeat the procedure. Also make sure that no other gadget is connected to the headphones, since Redmi AirDots 3 may try to reconnect with the last active device.
Connection with iPhone and iOS devices
Although the headphones are designed by Xiaomi, they are fully compatible with the Apple ecosystem thanks to support for standard audio transmission protocols. To connect to an iPhone or iPad, open Settings → Bluetooth and make sure the slider is activated. Pull the headphones out of the case - they should start flashing a white indicator, signaling readiness for mating.
In the "Other Devices" list, the Redmi AirDots 3 will appear on your smartphone screen. Tap it, and in a few seconds it will pair. Once you're successfully connected, you'll be able to play music and video. However, it's worth considering that some specific features, such as a pop-up with a case charge or quick mode switching, may not be available without third-party apps.
Management applications on iOS
The sound will be transmitted in high quality, but when the microphone is activated (during a call or recording a video), the codec can switch to HFP (Hands-Free Profile), which will temporarily reduce the quality of stereo sound to monophonic. This is the standard behavior for all Bluetooth headsets on an iPhone, which is not a defect.
Working with Windows PCs and laptops
Using Redmi AirDots 3 with a Windows 10 or 11 computer requires several additional steps compared to smartphones. First, activate the search mode on the headphones themselves (extract from the case, wait for the blink). → Parameters → Devices → Bluetooth and other devices.
Click Add Bluetooth or other device and select "Bluetooth" type. Your computer will start scanning the airwaves. Once Redmi AirDots 3 appears in the list, click on the name. The system will install the required drivers automatically. Once the "Connected" message appears, the sound should switch to the headset.
| Parameter | Meaning/Description | Impact on work |
|---|---|---|
| Protocol | Bluetooth 5.2 | Provides low latency and stability |
| Codecs. | SBC, AAC | Sound quality (AAC is preferred for iOS) |
| Range. | 10 meters | Depends on the presence of walls and interference |
| Delay (Latency) | Low (in game mode) | Important for games and videos |
If there is no sound, check playback settings. Right-click on the speaker icon in the tray, select Open Sound Settings, and select your headphones under Output. In some cases, you need to manually install Bluetooth adapter drivers through Device Manager if the built-in PC module is outdated.
Management settings and additional functions
Once you've successfully connected, you'll need to adjust your touch control to suit yourself. By default, Redmi AirDots 3 has the standard actions set up: double-touch for playback/pause, triple-touch for calling an assistant or the previous track. To change these settings, Android owners are advised to install the Xiaomi Earbuds app (available in the Play Market or through scanning). QR-code-in-in-command).
In the appendix, you can:
- 🎧 Reassign actions to single, double and triple touch.
- 🔊 Set up an equalizer or select (pop, rock, jazz).
- 🔇 Activate the transparency or noise reduction mode (ANC).
- 🎮 Enable game mode to reduce sound delay.
The game mode deserves special attention. When activated, the sound delay is reduced to a minimum, which is critical for shooters and rhythm games. However, it is worth considering that turning on this mode increases power consumption. For activation without an application, triple touch and hold the sensor for 2 seconds are often used (configuration can be checked in the specific revision instructions).
⚠️ Attention: Touch control may be too sensitive. If the headphones respond to the touch of hair or clothing, the app can turn off certain types of touches or reduce sensitivity.
Resetting settings and solving connection problems
If the headphones are no longer connected, you only see one headphone instead of two, or the sound is interrupted, you need to reset to the factory settings. TWS-The reset process on Redmi AirDots 3 is performed as follows:
- Remove (forget) the device in your phone’s Bluetooth settings.
- Place both headphones in the charging case.
- Without closing the lid, press and hold the touch zones on both headphones simultaneously for 10-15 seconds.
- The indicators should flash red several times, after which go out or light up white is a signal of a successful reset.
Once reset, the headphones will go back into pairing mode and can be found as a new device. If the problem persists, try cleaning the charging contacts on the headphones with an alcohol napkin - oxidation can prevent the left and right channel from correctly synchronizing within the case.
💡
Hard Reset eliminates 90% of the problems with channel desynchronization and failure to connect to new devices.