Modern fully wireless headphones like the Xiaomi Mi Air have become the standard of mobility and convenience, eliminating entangled wires. The process of first activating and then using them is designed as intuitively as possible so that any smartphone owner can start using the headset immediately after unpacking. However, despite the simplicity of Bluetooth technology, there are nuances that can confuse an inexperienced user, especially when trying to pair with devices of different operating systems.
In this detailed guide, we’ll look at all the steps of connecting, from removing headphones from the case to fine-tuning audio codecs and gesture control. For a stable headset, make sure your smartphone has the latest version of Bluetooth drivers installed. We’ll also look at the differences in procedure for Android and iOS devices, as they have their own features of interaction with Xiaomi accessories.
To start with, getting the devices right is key to a fast, seamless connection. You don't have to be a digital expert to do these simple things, but being mindful of detail will help you avoid common mistakes. Let's move on to step one, which is fundamental to all the rest of the headset.
Preparation of headphones and smartphone for the first launch
Before trying to find the device in the list of available, you need to make sure that the headphones are in the correct standby mode. Usually, Xiaomi Mi Air automatically goes into pairing mode on the first retract from the charging case, if they have not previously been associated with any device.
To do this, place both headphones back in the case and leave the lid open. Find the function button on the charging case, which is usually located on the back or inside between the ear compartments. Press and hold this button for 2-3 seconds until the status indicator flashes white. This means that the pairing mode is activated and the device is ready to search.
In parallel with the preparation of the headset, you need to make sure that the smartphone is ready. Check if the wireless module is on in the settings of your phone. If you are using Android, make sure that geolocation is enabled, since modern versions of the system require access to location to scan Bluetooth devices. On iPhone, it is easy to activate the corresponding switch in.
⚠️ Note: If the indicator on the case flashes red or does not light up at all, this may indicate a critically low battery charge level. 15-20 minutes before re-attempting to pair, otherwise the process may be interrupted.
Instructions for connecting to Android smartphones
The Android operating system offers ample opportunities for managing peripherals, and Xiaomi Mi Air headphones are no exception.The connection process on most devices is unified, but Xiaomi smartphone owners can get advanced functionality thanks to deep integration with the MIUI or HyperOS shell.
To start, open your smartphone settings and go to the Bluetooth section. Make sure the activation slider is in the "On" position. Press the search button for new devices or just wait a few seconds for the system to scan the ether. The name of your model should appear on the list of available devices, for example, Xiaomi Mi Air 2 or Mi True Wireless Earbuds.
Click on the device name to start the mating procedure. The system may request confirmation to create a pair or enter. PIN-In most cases, the code is not required, or it is standard (0000), but modern Xiaomi models usually connect automatically without digits. Once successfully connected, you will hear a characteristic beep in the headphones, and in the status bar of the phone will appear the icon of the battery charge of the headset.
☑️ Checking a successful connection
Xiaomi smartphone owners are encouraged to install or update the MIUI system app to access a pop-up window with animations of charging the case and each headphone separately, which allows you to visually monitor the battery status directly on the lock screen, which is much more convenient than the standard indicator in the notification curtain.
Connection with iPhone and iOS devices
Users of the Apple ecosystem can also comfortably use Xiaomi Mi Air headphones, although some specific features available on Android may be limited.The connection process on an iPhone or iPad is as standardized as possible and does not require installing additional apps for basic work.
Open Bluetooth settings on your iOS device. Make sure the headphones are in pairing mode (the indicator on the case flashes white). In the "Other devices" section, the name of your headset will appear on the smartphone screen. Tap it to initiate the connection.
Once the connection is confirmed, the iPhone will remember the device and automatically connect to it when you remove the headphones from the case in the future.
Mi Earbuds
Why does the iPhone not see Xiaomi headphones?
AAC is usually used by default on Apple devices, providing good sound quality, but for maximum quality on Android, you can choose more advanced codecs in the engineering menu or through special applications.
Configure management and functions through the application
To unlock the full potential of your Xiaomi Mi Air, it is highly recommended to use specialized software. On Android, it can be the built-in system interface or the Mi Earbuds app available from the Google Play Store. This is where the main magic of customizing personalization takes place.
In the app, you can change the modes of touch control, double tap can play a track by default, and triple tap can call a voice assistant, but you can reconfigure these actions according to your preferences, for example, assign the switching of noise reduction mode to long-term retention or switch tracks to single touch.
| Function | Description | Availability |
|---|---|---|
| equalizer | Frequency setting (bass, high) | Android/IOS (through third-party) |
| Noise suppression | ANC regimes and transparency | All platforms. |
| Headphone search | A sound signal to search in the room | Android only (Mi Earbuds) |
| Update of the PO | Firmware microcode headphones | Android only (Mi Earbuds) |
One of the key features available through the app is a firmware update (Firmware).Developers periodically release updates that improve connection stability, fix microphone bugs or add new gestures.Recommended updates to keep your headphones running properly.
💡
Use the "Find Headphones" feature in the app if you've lost one of your headphones at home.The headset will start to emit a loud squeak that will help the Locate device even under the sofa or in your bag.
Use of noise reduction and transparency modes
Xiaomi Mi Air models with active noise reduction (ANC) offer users several modes of operation that can be switched directly through touch control or in the application. Understanding the difference between them will help you better adapt to the surrounding noise.
Active noise cancellation uses external microphones to analyze ambient noise and generate antiphase, effectively drowning out the low-frequency hum of transport or air conditioners, ideal for subway travel or airplane flights where background noise is monotonous and constant.
Transparency Mode, by contrast, amplifies external sounds by passing them through microphones inside the headphones, allowing you to hear the dispatcher's announcements at the airport, talk to the cashier in the store, or hear trafic outside without removing the earphones from your ears, often switching between these modes by triple touching or holding the touch zone.
⚠️ Attention: Active noise cancellation may cause a slight pressure in the ears. ANC, If the discomfort is severe, switch to Normal or Transparency mode».
The effectiveness of noise reduction also depends on the density of the ear canal adhesives. If the headphones are not seated tightly, external noise will penetrate the interior, negating the electronics. Try replacing the standard ones with a size larger or smaller to achieve perfect insulation.
Elimination and troubleshooting
Even the most advanced technology sometimes fails, and the Xiaomi Mi Air headphone connection doesn't always go smoothly the first time. If you run into problems, don't rush to bring the device to the service center. Most problems are solved by simply restarting or resetting the settings.
One of the common problems is connecting only one headphone (mono mode) when the second one is silent, which happens when the synchronization between the left and right channel is lost, and to solve this problem, you need to perform a full reset (Hard Reset) of the headset.
Resetting instructions:
1. Remove the device from the Bluetooth list on the phone ("Forget the device").
2. Place both earphones in the case.
3.Push and hold the button on the case for 10-15 seconds.
The indicator shall flash several times and fade or change color.
5. Repeat the pairing procedure again.Another common situation is that there is a quiet sound or no sound in one of the channels. Check the sound balance in the settings of the special features of your smartphone. Also make sure that the speaker's protective mesh is not clogged with earwax, which is a common cause of sound deterioration.
💡
Hard Reset solves 90 percent of the problems with channel desynchronization and connectivity, and don't ignore this step when troubleshooting.