Modern wireless headsets have become an essential part of an active lifestyle, and the Xiaomi Mi Basic Earphones 2 is no exception. These headphones are attractive for their affordable price and the presence of Bluetooth 5.0 technology, which provides a stable connection over a considerable distance. However, the initial configuration of the device often raises questions for users accustomed to classic wired solutions or more complex ecosystems. The synchronization process is simple, but requires adherence to a certain sequence of actions for successful pairing.
Before you start using it, it’s important to understand that connecting correctly is not only key to sound quality, but also to the correct operation of the microphone and control buttons. In this article, we will discuss all the stages of configuration, look at the nuances of working with different operating systems and answer frequently asked questions. You will learn how to activate the pairing mode and what to do if the gadget is not displayed in the list of available devices.
⚠️ Warning: Before setting up, make sure the headphones are fully charged.A discharged battery can prevent the device from entering detection mode, making it impossible to connect to the smartphone.
Preparation of headphones for the first turn on
The first step to getting sound quality is getting the headset ready properly. The Xiaomi Basic 2 comes with a built-in battery that you want to charge to 100% before you use it for the first time. This uses a Micro-USB port located on one of the headphone modules, or a magnetic connector cable that comes with the kit. The charge indicator, usually located on the control button, will report the battery status: red signals the charging process, and the indicator is turned off, about full charge.
After charging, you need to activate the device. To do this, press and hold the function button on the headphone case for 5-7 seconds. At this point, the blue indicator will light up, and then it will flash blue and red alternately. This means that the headset has switched to Pairing Mode and is now visible for search by external devices. If the indicator is on blue without blinking, then the device is already connected to another gadget or turned off.
💡
If the headphones were previously connected to another phone, they may try to connect to it automatically, in which case, turn off Bluetooth on the old device to free up the communication channel for the new smartphone.
It is important to note that search mode is only active for a limited time. If the connection is not established within a couple of minutes, the headphones will go into sleep mode to save energy. In this case, the procedure for turning on and activating the detection mode will have to be repeated. Make sure that your smartphone is in close proximity to the headset, ideally, at a distance of no more than 1 meter.
Matching with Android devices
Android offers a wide range of peripheral features. To connect Xiaomi Basic 2 to an Android smartphone, open the settings and go to Bluetooth. Make sure the activation slider is switched to On. The system will automatically start scanning the surrounding space for available gadgets. The Mi Basic Earphones 2 should appear on the Available Devices list.
Click on the model name to initiate the connection. The screen may request confirmation of pairing with or without the code. Once the device status is confirmed, it will say "Connected" or "Connected for media and call sound." Sometimes the system may request permission to access contacts and call logs, which is necessary to correctly display the caller's name and manage the conversation through the headset buttons.
☑️ Checking Android Connectivity
Note that the interface of the settings menu may differ depending on the version of Android and the manufacturer’s shell (MIUI, OneUI, ColorOS, etc.). In some cases, for the full operation of all functions, you may need to install an additional application, although the basic functions work natively. If the connection is installed, but there is no sound, check in the Bluetooth settings whether the A2DP (Advanced Audio Distribution Profile) profile is activated for this device.
Connection settings on iOS (iPhone)
Apple smartphone owners can also successfully use the headset, although the functionality may be somewhat limited compared to the original AirPods. The connection process on iOS is standardized and simple. Go to Settings → Bluetooth and activate the switch. Wait for the Mi Basic Earphones 2 name to appear on the list, click on it. iOS usually does not require you to enter a confirmation code, the connection is instant.
Once paired successfully, the iPhone will remember the device. In the future, the connection will automatically occur when the headphones are turned on if Bluetooth is active on the phone. Standard protocols are used to control playback and calls, so the volume buttons and Play/Pause must work correctly. However, Siri voice assistant can only be activated by triple tap, depending on the iOS version and access settings.
⚠️ Attention: On iOS devices, there is sometimes a problem when the headphones are connected, but the sound continues to go through the phone's speaker.In this case, open the "Control Point" (swipe down from the upper right corner) and manually select Mi Basic Earphones 2 as the audio output device.
New versions of the operating system can change the algorithms of working with Bluetooth accessories from third-party manufacturers. If after the iOS update, the headphones stopped working steadily, try removing the device from the list (“Forget this device”) and pairing again. This often solves problems with desynchronizing profiles.
Solving Connection and Sound Problems
Despite the reliability of Bluetooth 5.0 technology, there are times when connectivity is impossible or unstable. The most common reason is overflow of memory of paired devices or a conflict of profiles. If the headphones are not a phone, try to reset the headset completely. To do this, while in the off state, press the on button for 10-15 seconds until the indicator flashes red several times. This will clear the internal memory of the headphones from old connections.
Another common problem is intermittent sound or stuttering, which can be caused by interference from other wireless devices (Wi-Fi routers, microwave ovens) or physical obstacles. It is also worth checking whether the headphone battery is discharged, since when the charge is low, the transmitter power decreases. Make sure that there are no thick walls or metal structures between the headphones and the smartphone that shield the signal.
How to perform a hard reset (hard reset)?
If the microphone is sound but not working, check your privacy settings on your smartphone. In modern Android and iOS versions, apps require explicit permission to use the microphone. Also, make sure that the Bluetooth settings for the connected device activate Incoming Calls. Without this profile, the headset will only work as a sound output device.
Management and additional functions
The Xiaomi Basic 2 headset features physical control buttons located on the cases of both headphones. This allows you to control playback and conversations without having to reach your smartphone. The functionality of the buttons is standardized, but its knowledge significantly improves the experience of use. For example, double-pressing the right earphone usually calls the last number dialed or activates the voice assistant, depending on the phone settings.
Below is a table of the main control commands that are supported by this model:
| Action. | The result | Area of application |
|---|---|---|
| Single press | Answering the call/pause or playback | Both earphones. |
| Double-push | Repeated last number / Next track | Right/Left |
| Triple press. | Previous track | Left earpiece |
| Holding 2 seconds | Reject call/Activate assistant | Both earphones. |
💡
Remember the button combinations: Double-pressing the right earphone is the quickest way to call back the last contact, which is critical in emergency situations.
It is worth noting that music track management (track switching) does not work in all applications the same. Standard players (Google Music, Apple Music) support all commands, while some third-party messengers or streaming services can ignore track switching commands, responding only to pause.
Technical features and care of the device
It is important to maintain the longevity of the device. Bluetooth 5.0, used in this model, provides low power consumption, but is sensitive to moisture and sweat. After sports training, it is recommended to wipe the headphone case with a dry soft cloth. The accumulation of moisture in the mesh speaker can cause sound distortion or failure of the device. Do not use aggressive chemical cleaning agents.
The headphone battery has a limited lifetime of charge-discharge cycles. To extend the life of the battery, try not to discharge them "to zero" regularly and do not leave them in storage completely discharged for a long time. The optimal charge level for storage is about 60-70%. Also avoid overheating the device: do not leave the headphones in direct sunlight or in the car in hot weather, as lithium polymer batteries degrade at high temperatures.
In conclusion, Xiaomi Basic 2 is a reliable and easy-to-use device that, when set up properly, provides comfortable audio listening and communication. Understanding Bluetooth and performing pairing procedures correctly will save you most of the potential problems. Regular charging and careful handling of the case will allow you to enjoy quality sound for many months.