Modern smartphones like the popular Xiaomi Redmi 8 provide users with ample multimedia entertainment. However, many owners face primary difficulties when trying to activate wireless sound.
In this article, we will discuss in detail the process of pairing different models of headsets, from classic Bluetooth to modern ones. TWS-You'll learn about the nuances of the shell. MIUI Features that may affect the sound quality.
So if you can set up the equipment properly, you can enjoy music or conversation without having to wire, and let's take a look at all the steps from the onset to the final calibration of the sound.
Equipment Preparation and Bluetooth Activation
Before starting the procedure, you need to make sure that your equipment is ready to work. The battery of the smartphone and the headphones themselves should be charged at least 20-30%, since the search and pairing process consumes energy.
To start, turn on Bluetooth on the Xiaomi Redmi 8 itself. This can be done in two ways: through the notification curtain or through the main settings menu. Choose the option that is more convenient for you.
The second step is to put the headphones in pairing mode, which is a critical point that beginners often miss, and usually this requires pressing the switch on the headset until the indicator flashes blue or red and blue.
⚠️ Warning: If the headphones were previously connected to another phone, they may automatically try to connect to it.In this case, temporarily turn off Bluetooth on the old device.
Make sure you are in close proximity to your smartphone and the distance should not exceed 1-2 meters during the initial setup.
Step-by-step interface instruction in MIUI
The MIUI shell interface installed on Redmi 8 has its own navigation features. First, unlock the device screen and find the Settings icon.
In the menu that opens, select Bluetooth. Make sure the slider is activated. The system will automatically start scanning available devices in range.
- 📱 Open the notification curtain with a swipe from top to bottom and tap on the Bluetooth icon.
- ⚙️ Or go to Settings. → Bluetooth for extended menu.
- 🔍 Wait for your headset name to appear in the “Available Devices” list».
- ✅ Click on the model name to start pairing.
After pressing, the system will request confirmation or automatically pairing. Successful connection will be accompanied by a characteristic audible signal in the headphones and the appearance of the status "Connected" on the smartphone screen.
☑️ Connection check
Work with TWS-headsets and cases
Xiaomi Redmi 8 users often use modern devices TWS-True Wireless Stereo headphones have different connectivity features than the classic headband models.
In most cases, if you're connecting the headset for the first time, you need to remove both headphones from the charging case.Some models require double-tapping the touchpad to activate the search mode.
The MIUI shell often supports fast pairing for Xiaomi and Redmi brand devices. In this case, when you open the case cover next to the smartphone, a connection animation may appear on the screen.
What if only one headphone is connected?
If this does not happen, check the charge of the case.
Customization of sound and equalizer
After a successful connection, you should pay attention to the quality of playback. Redmi 8 has built-in tools to improve the sound.
Go to the Sound and Vibration section of the settings, and here you will find Sound Quality and Effects (or MI Sound), which activates the feature to select a sound profile.
- 🎵 Select the “Hearphones” mode to activate additional settings.
- 🎚️ Set up the equalizer by choosing a genre of music (Pop, Rock, Jazz).
- 🔊 Adjust the frequency balance manually for perfect sound.
Also available on this menu is Mi Sound Enhancer, which adapts the sound to a specific model of the connected headset, which is especially useful for unlocking the potential of budget models.
💡
For maximum sound quality, turn on the aptX codec in the Sound Quality and Effects section if your headphones support this technology, which will improve the detail of the tracks.
Solving Connection Problems
Sometimes it can go wrong, and a smartphone can't see the device, or the connection can be unstable, and let's look at the underlying reasons.
One of the common problems is a crowded Bluetooth cache or profile conflict, in which case cleaning the list of associated devices helps.
⚠️ Note: Before resetting your network settings, make sure you remember the Wi-Fi passwords as they will be deleted along with your Bluetooth data.
If the sound is interrupted or an echo appears, try to push the smartphone away from sources of strong radio interference, such as Wi-Fi routers or microwave ovens.
Table of indicator and status codes
Understanding the signal indicator helps to diagnose the condition of the headset. Below is a transcript of the main modes of operation.
| Indicator | Color/Mode | Meaning |
|---|---|---|
| Slow blinking | Blue | Interconnection mode (ready to connect) |
| Fast blinking. | Red/Blue | Device search or connection error |
| It's burning all the time. | Blue | Successful connection to Redmi 8 |
| Rare flashing | Red. | Low battery charge (requires charging) |
These signals are universal for most devices running the Android operating system.
Managing energy consumption and auto-switching
The wireless connection consumes the battery power of Xiaomi Redmi 8. To optimize the operation, the system can limit background processes.
You can find energy saving options in the battery settings, but for a Bluetooth headset to work, it is recommended not to put too aggressive restrictions.
Modern headphones themselves go into sleep mode after 5-10 minutes of downtime. If this does not happen, check the settings of the sleep timer on the smartphone itself.
💡
The optimal balance between sound quality and autonomy is achieved using an SBC or AAC codec, whereas aptX HD requires more power.
Reset Bluetooth settings and reconnect
If none of these methods worked, a radical approach is needed, a complete reset of the network settings, which will return the communications module to factory status.
To do this, go to Settings → Connection and Sharing → Reset Wi-Fi, mobile networks and Bluetooth. Confirm the action by entering the unlock password of the screen.
After rebooting Redmi 8, try pairing again as if you were doing it for the first time. This usually resolves 99% of software conflicts.