How to connect headphones Airdots Xiaomi: a step-by-step guide

Xiaomi’s modern wireless gadgets have gained popularity due to their affordable price and stable sound quality. However, the initial setup process often raises questions for new users, especially when the device is not detected automatically by the smartphone. The right sequence of actions at the first launch is the key to the stable operation of the Bluetooth headset in the future.

Many owners are faced with a situation where the left or right headphone is not synchronized with each other, creating a mono mode instead of a stereo. This is not a sign of marriage, but rather a feature of the logic of the connection protocol. Understanding the operation of indicators and control buttons will help avoid common mistakes when trying to create a new pair.

In this guide, we will not only break down the standard connection algorithm, but also how to solve complex technical problems. You will learn how to perform a full Hard Reset if the device stops responding, and how to properly charge the case for maximum autonomy. Following these instructions ensures that your AirDots will work correctly.

Preparation of headphones and smartphone for pairing

Before starting the procedure, make sure that both devices are ready to interact. The battery charge in the case and the headphones themselves should be sufficient, since at low charge, the Bluetooth module can work unstable or not turn on at all.

Pay attention to the indicators: they should light up red to signal switching on. If the indicators don't light up, check to see if the protective films are removed from the contacts on the headphones themselves, which often happens with new devices. Also make sure that your smartphone activates Bluetooth module and geolocation is enabled, since in modern versions of Android it is a mandatory requirement to find peripherals.

⚠️ Warning: Do not try to connect the headphones while they are inside the charging case. When closed, they go into charging mode and block pairing signals.

It’s important to keep your headphones close to your phone, but not press them close to each other during the initial turn on. 10-20 centimeters is the best distance for establishing a reliable communication channel. If you’re using an iPhone, make sure the iOS version is relevant enough to support the AAC codec that Xiaomi uses.

Step-by-step instructions for connecting to Android and iOS

The pairing process is almost identical for both operating systems, but there are nuances in the display of devices in the list. After extraction from the case, the headphones must automatically go into pairing mode, as evidenced by the rapidly flashing white indicator on one of them (usually on the right, if the model is not symmetrical).

Open Bluetooth settings on your mobile device and start searching for new gadgets. The model name should appear on the list of available devices, for example, Mi True Wireless EBs Basic or Xiaomi Earbuds Basic. Click on the name to start the connection.

Once the connection is successful, the voice assistant will notify you of status (“Connected” or “Connected”), and the indicators will stop flashing and light up less often or go out. If the phone requests an access code confirmation, just type 0000 or confirm pairing. For iOS users, the process can take a few seconds longer due to system security checks.

⚠️ Warning: If two devices with your headphones on the search list appear to be the same, don't connect to either of them. This is a sign of desynchronization, and you need to reset your settings.

In some cases, especially on MIUI-enclosed smartphones, the system can request permission to access contacts and call logs, which are necessary for the microphone to function properly and the caller's name to be displayed, without which the headphones will only work as a sound output device.

Mono and stereo mode: setting up the work of one headphone

The unique feature of the AirDots series is that you can only use one headphone independently of the other, which is convenient for drivers or in situations where you need to hear the environment. To activate this mode, just remove one earphone from the case, leave the second one inside, or take both out, but connect to the phone with only one.

In monophony mode, the second earpiece can be used independently, connecting to it as a new device from another phone, but to return to full stereo mode, you need to properly reconnect, just putting them back in the case and removing them again is not enough if the previous session ended incorrectly.

For forced switching to stereo mode, place both headphones in the case, close the lid and wait. 5-10 Then pull them out at the same time. One of them should flash white often, waiting for the phone to connect, while the other will blink slowly, waiting for the first to connect. TWS-system.

If the automatic stereo pairing doesn't happen and the sound is coming from only one channel, you'll need manual intervention. Turn off Bluetooth on your phone, put the headphones in your case, then do the reset procedure described in the next section. This will overwrite the connection profiles inside the headset memory modules.

Problem Solving: Resetting (Hard Reset)

The most common problem users face is de-synchronizing the left and right channels. The headphones work independently, and the music only plays on one side. To fix this defect, you need to perform a full Hard Reset. First, remove the device from the Bluetooth list on the phone ("Forget the device").

Put both earbuds in a charge case. Without removing them, press and hold the touchpads on both earbuds simultaneously for a period of time. 20-30 The indicators should flash red several times and then go out.

Emission sequence:


1. Remove the phone from Bluetooth.




2. Put it in the case.




3. Hold the sensors for 20-30 seconds until red flash.




4. Retrieve and reconnect.

After this procedure, the headphones must be removed again and given time (about 5-10 seconds) to find each other before connecting to the phone. Only after one of them starts flashing white quickly (phone search mode), you can turn on Bluetooth on your smartphone.

⚠️ Warning: During reset, do not remove the headphones from the case until the indicators are turned off after a red flash.

If the reset didn't work the first time, repeat the procedure twice. Sometimes it takes several cycles to completely overwrite the controller's firmware. Also make sure that the contacts on the headphones and inside the case are clean, as oxidation can prevent the timing signal from being transmitted.

Control of sensors and voice assistants

Xiaomi Airdots is controlled through mechanical buttons or touch panels (depending on the specific revision of the model) located on the body. Presses must be clear, but not excessively strong, so as not to damage the mechanism. Single press is usually responsible for playback or response to a call.

Double-pressing activates a voice assistant (Google Assistant or Siri) if it is configured in the smartphone system. Triple pressing on the right earphone is often used to call the last number dialed, and on the left to switch the track back or lower the volume, depending on the firmware version.

To activate voice control, make sure that the phone settings allow access to the microphone for system services. Voice commands are processed by the smartphone itself, the headphones only broadcast sound. Reaction delay may depend on the speed of the Internet connection and the load of the phone's processor.

If the sensor is no longer responsive to touch, wipe the surface with a dry cloth, fat or moisture can block the touch layer, and check if the physical button (on models with buttons) is stuck, which happens when dust is hit.

Optimizing sound and eliminating interference

Sound quality can suffer from interference in the air or improper position of the phone. Bluetooth signal does not pass through metal objects and dense walls. Try to keep the phone in your pocket of clothes, not in your bag if you see interruptions of music.

To improve audio quality, it is recommended to disable the “Absolute Volume” option in the developer settings (for advanced users) or in the standard Bluetooth menu if the volume of the headphones is not synchronized with the volume of the phone. This is a common problem when pairing Android and iOS devices.

💡

If the sound is quiet or wheezing, check the speaker grid. Sulfur dust can clog holes, significantly impairing acoustic performance. Clean them carefully with a soft dry toothbrush.

Interference from 2.4GHz Wi-Fi routers can also affect connection stability. If you're near a powerful signal source, try stepping back a couple of meters or switching the router to 5GHz mode if possible, which will free up ether for the Bluetooth protocol.

Regular firmware updates through the app (if the model is supported) can fix connection bugs. However, for basic AirDots models, firmware is often not updated by the user and depends on the version when you purchase, so the correct initial reset and connection is more important than software updates.

⚠️ Warning: Do not use headphones near microwave ovens while they are running.The microwave oven radiation completely silences the Bluetooth signal at a distance of up to 2-3 meters.

Keeping the distance and the absence of physical barriers between the phone and the headphones is the key to quality sound. Remember, the range is about 10 meters in the open, but indoors it can be reduced to 3-5 meters due to walls and furniture.

Frequently Asked Questions (FAQ)

💡

The main secret of stable operation of Airdots is the correct sequence of extraction from the case and timely resetting of settings at the first signs of channel desynchronization.