How to connect a Xiaomi speaker to a phone, TV or computer: all ways

Xiaomi speakers are a combination of affordable prices, high-quality sound and modern technology, but even with such devices, users often have questions: how to properly connect a Bluetooth speaker to a smartphone, sync Mi Soundbar with a TV or set up a setup. AUX-In this article, we will look at all the current ways of connecting, from basic to advanced, and also solve the typical problems that may arise during the process.

It doesn’t matter what model you have – a compact Mi Portable Bluetooth Speaker, a powerful Redmi Sonics Bass or a Mi sound bar. TV Soundbar: the principles of connectivity are universal, but there are nuances for each type of device, for example, wireless synchronization with the TV may require a firmware update, and when using a 3.5 mm connector, the right cable choice. We will dwell on each scenario in detail so you can enjoy the sound without technical hitches.

1. Connecting the Xiaomi column to a smartphone over Bluetooth

The most popular method is Bluetooth wireless connectivity, which is suitable for all Xiaomi speakers models, including Mi Compact Bluetooth Speaker 2, Redmi Sonics Bass and others, the main advantage is the lack of wires and the ability to control playback remotely.

To sync your column with your phone on Android or iOS, follow the following steps:

• 📱 Turn on Bluetooth on your smartphone: go to Settings → Connections → Bluetooth (on iPhone: Settings) → Bluetooth).
• 🔊 Hold the power button on the Xiaomi speaker for 3-5 seconds until the blue light flashes (pairing mode). AI Speaker, you may need to press a separate Pair button.
• 🔍 In the list of available devices on your phone, find the name of your column (usually starting with Mi, Redmi or Xiaomi.
• 🎵 After successful pairing, launch any audio player (such as Spotify or YouTube Music) – the sound should be automatically transmitted to the speaker.

If the column is not defined, try:

• 🔄 Reboot the column (hold the power button for 10 seconds).
• 📴 Turn off and turn on Bluetooth on your phone again.
• 🛠️ Reset the column settings (some models have a Reset button or key combination).

⚠️ Note: The iPhone may be asked to access contacts when it first connects, which is a standard iOS requirement for Bluetooth devices.

2. Connection to the TV: HDMI, Bluetooth and AUX

Mi sound panels TV Soundbar and some portable speakers (such as the Mi Home Speaker) can be connected to a TV. TV And the column itself. Let's look at all the options:

2.1 Connection through HDMI ARC (soundboard)

This is the best way for Mi to work. TV Soundbar, because it provides high-quality digital audio and allows you to control the volume from the TV remote. HDMI-cable (usually included in the package).

1. Connect one end of the cable to the port HDMI ARC on the television (usually signed as ARC eARC).
2. Put the other end in the connector. HDMI IN on the Xiaomi soundbar.
3. Turn on the TV and in the sound settings select Exit through HDMI ARC (The path may be different: Settings → Sound. → Audio output).
4. On the sound bar, select the source of the signal. HDMI (Source button or remote control).

Bluetooth connection (for supported TVs)

If your TV supports Bluetooth (e.g., Mi models) TV 4S/5X or Redmi Smart TV), You can connect the column wirelessly:

• 📺 On the TV, go to Settings. → Bluetooth (or Settings) → Connections → Other devices).
• 🔊 Move the column to pairing mode (as in section 1).
• 🔍 Select a column from the list of available devices.

If there is no Bluetooth in the TV menu, there is USB-port, you can use a Bluetooth adapter (sold separately). USB, Then repeat the pairing steps.

2.3 Connection through AUX (3.5 mm or RCA)

A universal method for older TVs or models without Bluetooth/HDMI ARC. It'll take a cable. 3.5 mm — 3.5 mm (jack-jack) or RCA — 3.5 mm (tulips).

• 🔌 Connect one end of the cable to the exit AUX OUT Or Audio Out on TV.
• 🎧 Put the other end in the connector. AUX IN Xiaomi column.
• 🔊 In the column, select the source of the signal AUX (Mode or Source button).

⚠️ Note: When connecting through AUX volume control on the TV remote may not work – you will have to control the sound with buttons on the column.

3. Connection to a computer or laptop (Windows/macOS/Linux)

Xiaomi speakers easily connect to PC or Mac – both via Bluetooth and via the Internet. AUX. Let's look at both options.

3.1. Wireless connection (Bluetooth)

For Windows 10/11:

1. Open Settings → Devices → Bluetooth and other devices.
2. Click Add Add the device → Bluetooth.
3. Move the column to pairing mode (see section 1).
4. Select a column from the list and wait for the connection to complete.

For macOS:

1. Open System settings → Bluetooth.
2. Click Connect next to the name of the Xiaomi column.

If the speaker is connected but there is no sound:

• 🔊 Check if it is selected as an output device: in Windows, click on the volume icon → Select a column. On a Mac: System settings → Sound. → Exit.
• 🔄 Reboot Bluetooth module: in Windows, turn off / turn on the adapter in Device Manager.

3.2 Connection through AUX (3.5 mm)

If you have a headphone output (3.5mm) on your PC, use it:

• 🔌 Connect the cable to the green connector on the back of the system unit or the side exit on the laptop.
• 🎵 In the sound settings (Windows: Control Panel) → Sound) make sure that the correct output is chosen.

For Linux (Ubuntu/Debian) You may need to install PulseAudio drivers:

sudo apt install pavucontrol


pavucontrol

In the window that opens, select the column as the output device.

💡

If the sound is interrupted when you connect over Bluetooth, try disabling the aptX codec in Windows settings: → Devices → Column → Additional parameters → Codec SBC.

4. Connect two Xiaomi speakers in stereo mode

Some Xiaomi models (such as Mi Portable Bluetooth Speaker 2 or Redmi Sonics Bass) support pair connection to create a stereo effect, which allows you to double the volume and improve spatial sound.

To synchronize the two columns:

1. Connect the first speaker to the sound source (phone, PC) via Bluetooth.
2. Hold the Pair button (or the Volume combination)+ + Power) on the second column for 5 seconds until you hear the beep.
3. On the first column, double-press the Pair button (or hold the Volume).+ 3 seconds – devices must be connected.
4. 🎧 The sound will be played synchronously on both speakers.

If the synchronization is not working:

• 🔄 Reboot both columns.
• 📱 Update the speaker firmware through the Mi Home app (if available for your model).
• 🛠️ Make sure that both columns of the same model – different versions – may not support pair connection.

⚠️ Warning: In stereo mode, the battery on both speakers is consumed 1.5-2 times faster. It is recommended to use them from the network if you plan to play long-term.

5. Solving Connection and Sound Problems

Even after successful pairing, there can be problems: the sound is interrupted, the speaker is not defined or the sound is distorted, and we can look at typical situations and how to fix them.

5.1. The column does not connect via Bluetooth

• 🔋 Check battery power: if the level is below 10%, the column may not be in pairing mode.
• 📱 Remove the column from the list of devices on the phone/PC and reconnect.
• 🛠️ Reset the column settings: Most models need to hold the Power button for 15 seconds.
• 📴 Turn off power saving mode for Bluetooth on your phone (Android: Settings) → Battery → Optimization → Bluetooth).

5.2. The sound is interrupted or stuttered

• 📶 Reduce the distance between the speaker and the sound source (optimally up to 5 meters).
• 🚫 Remove obstacles (walls, furniture) between devices.
• 📵 Disable other Bluetooth devices (earphones, smartwatches) that may interfere.
• 🔄 Switch the sound codec to SBC (in Bluetooth settings on Android or Windows).

Low quality of sound when connected via AUX

• 🔌 Check the cable for damage – often the cause of noise is poor contact.
• 🎛️ Make sure that the sound source (phone/PC) is not activated by sound effects (Equalizer, Dolby Atmos).
• 🔊 Adjust the sound balance: on Windows, click on the volume icon → Open volume mixer → check the balance.

6. Update of the firmware of the Xiaomi column

For some models (e.g., Mi) AI Speaker or Mi TV Soundbar) firmware updates are available that fix connection errors and improve sound. You can update the column through the official Mi Home app.

Instructions:

1. Download the Mi Home app from the App Store or Google Play.
2. Sign up or sign in to your Xiaomi account.
3. Connect the column to the app: press + → Add the device → Sound and follow the instructions.
4. If an update is available, a notification will appear. Click Update and wait until it is completed (don't turn off the power!).

After updating the firmware on Mi TV Soundbar 3.0.5 and higher supports Dolby Digital and DTS, This greatly improves the sound when connected through HDMI ARC.

⚠️ Warning: Do not interrupt the update process, this may result in loss of speaker functionality. If the update is suspended, wait 10 minutes, then restart the device.

7. Alternative ways of connecting

If standard methods are not suitable, additional adapters or protocols may be used.

Connection through USB (Soundbar)

Some Mi models TV Soundbar supports sound playback through USB-That's what the port is for:

• Connect the column to the TV or PC via USB-cable (usually) USB-A — USB-C).
• At the sound source, select USB-audio as the output device.

Note: In this mode, the speaker works as an external sound card, and its control buttons may not function.

7.2 Connection through NFC (compatible)

Xiaomi Columns with Support NFC (Like Mi. AI Speaker can be connected to the smartphone with one touch:

• 📱 Turn it on. NFC on the phone (Settings) → Connections → NFC).
• 🔊 Touch the back of the phone to the icon NFC column (usually marked by a wavy line).
• 🎵 Confirm the connection on the smartphone screen.

7.3 Use of Google Cast or AirPlay

For Wi-Fi-enabled speakers (such as Mi Smart Speaker), you can stream audio via:

• Google Cast: In apps like YouTube or Spotify, click the stream icon and select the column.

💡

For Google Cast to work smoothly, the speaker and phone must be connected to the same 2.4GHz Wi-Fi network. 5GHz networks are not supported by most Xiaomi devices.

FAQ: Frequent questions about connecting Xiaomi speakers