How to connect the column “Alice” to the Xiaomi TV: all the ways of 2026

Yandex’s Alice smart speaker is becoming more popular with Xiaomi appliances every year, and it’s no surprise that the combination of a voice assistant with powerful acoustics makes it possible to turn a regular TV viewing into a full-fledged movie theater. However, many users have difficulty syncing a speaker with a TV, and in this article we will look at all the current ways of connecting, from a simple Bluetooth connection to advanced protocols like the Internet. HDMI ARC and DLNA.

It is important to keep in mind that the connection method depends on the model of your Xiaomi TV (Mi series). TV 4/5, Redmi Smart TV, Xiaomi TV A and others) and column generations (Yandex Station) 2, Yandex Mini Station, Yandex Max Station. Some TVs only support basic protocols, others support advanced smart home features. We'll look at options for all scenarios, including solutions for older models without built-in Bluetooth. 5.0.

If you want to not only output the sound to the speaker, but also control the TV voice through Alice (on/off, switch channels, adjust volume), you will need additional settings through the Mi Home or Yandex app.

1.Preparation: What will be needed to connect

Before you start syncing, make sure you have everything you need. Here's the minimum set:

• 📺 Xiaomi TV with support for at least one of the protocols: Bluetooth, Wi-Fi Direct, HDMI ARC Or 3.5 mm audio output. Check the specifications of your model on the manufacturer's website.
• 🔊 Smart column Yandex Alice (any model, but for the HDMI ARC Yandex Station Max or Yandex Module with the appropriate port).
• 📱 Smartphone with installed applications Yandex (for setting the column) and Mi Home (for managing TV through Mi AIoT).
• 🔌 Cables (if necessary): HDMI (for ARC), 3.5mm audio cable → RCA (For older models), USB-Type-C (for column firmware).

Pay special attention to the TV firmware version.Outdated builds (below) MIUI TV 3.0) may not support modern audio protocols. Update the software via the Settings menu → On TV. → System Update. For the Alice column, the current version of the firmware is checked in the Yandex application in the Devices section».

Model compatibility:

⚠️ Note: If your Xiaomi TV is released before 2019 and doesn’t have Bluetooth built-in, an external Bluetooth transmitter (e.g., Xiaomi Bluetooth Audio Receiver or a Bluetooth Receiver) will be required to connect the speaker. 1Mii B06 The cost of such an adapter is from 1,500 rubles.

2. Method 1: Bluetooth connection (the easiest)

This is a universal method that works on all Xiaomi TVs released after 2018, the main advantage is the lack of wires and minimal settings, but there are also disadvantages: there are possible delays in sound (up to 200 ms) and a decrease in quality when compressing the audio codec.

Step instructions:

1. Turn on Alice and say “Pair the pairing mode” or press the Bluetooth button on the case (blue light will light up).
2. On the remote of the Xiaomi TV, click Settings (cogwheel) → Remotes & accessories → Add accessory.
3. In the list, find the Yandex Station device [model] and confirm the connection.
4. Sound menu. → Sound Output Select Yandex Station as the Main Audio Device.

The column is displayed in the list of TV devices|Sound goes through Alice's speakers, not built-in speakers.|No permanent communication breaks|Volume is controlled from the TV remote.-->

If the sound is interrupted or delayed, try:

• 🔄 Reconnect devices (remove the column from the list and add again).
• 📶 Move the column closer to the TV (maximum distance - 10 meters without obstacles).
• 🔇 In the TV sound settings (Sound) → Advanced) disable Audio Delay Compensation.

⚠️ Note: Xiaomi TVs with firmware older than 2021 may not have Sound Output on the menu, in which case the sound will be duplicated on the speaker and on the built-in speakers, the solution is to update the software or use it. HDMI ARC.

3. Method 2: Connection through HDMI ARC/eARC (quality)

Protocol HDMI ARC (Audio Return Channel, which allows you to stream audio from your TV to external devices without loss of quality and delay, is ideal for moviegoers, as it supports Dolby Digital and Dolby Digital formats. DTS. However, the method requires:

• 📺 Xiaomi TV from the port HDMI ARC (usually marked ARC eARC).
• 🔊 Yandex Station Max or Yandex Module with connector HDMI IN.
• 🔌 Cable HDMI 2.0 or 2.1 (length up to 3 meters for stable operation).

Step-by-step:

1. Connect one end of the cable. HDMI port ARC on the TV, the other to the connector. HDMI IN column.
2. On Xiaomi remote go to Settings → Sound → Sound Output and select HDMI ARC.
3. In the Yandex application for the column, activate the mode HDMI-entrance (section “Device” → Sound settings»).
4. Check sync: Enable any content with sound (like YouTube).

Critical nuance: on the TVs Xiaomi series Mi TV Q1/Q2 at the first connection through HDMI ARC You may need to reset the sound settings to factory (Settings menu) → Device Preferences → Reset → Reset sound settings).

💡

If, after connecting through HDMI ARC The sound is only coming through the TV, check the settings. CEC (Consumer Electronics Control (TV) in the menu. option must be enabled (Settings) → HDMI CEC → Enable).

4. Method 3: Connection via Wi-Fi (DLNA/UPnP)

If your Xiaomi TV and Alice speaker are connected to the same Wi-Fi network, you can transfer sound over the protocol. DLNA. This method is suitable for listening to music, but does not support sound from the TV-Applications (such as Netflix or Kinopoisk).

How to set up:

1. Make sure the TV and the speaker are on the same network. → Network → Wi-Fi.
2. In the Yandex app for the column, enable the option Network audio receiver (section "Device settings").
3. On TV, open the Media Player (or Mi Video), select the file to play and in the audio output menu, specify Yandex Station.

Limitations of the method:

• ❌ Doesn't work with the sound of HDMI-Sources (prefixes, cable TV).
• ❌ Sound delay can reach 500 ms.
• ❌ Not all Xiaomi models TV support DLNA for audio (e.g. Redmi Smart) TV X43 video-only).

5. Method 4: Connect via 3.5mm audio output (for older models)

If your Xiaomi TV is released before 2018 and doesn’t have Bluetooth or HDMI ARC, And then you have the analogue, you have to have a 3.5 mm connector:

• 🔌 3.5 mm cable → 3.5 mm (if the column has an Aux input).
• 🔊 Or a 3.5 mm cable. → RCA + Adapter for the column (if it has only digital inputs).

Instructions:

1. Connect one end of the cable to the TV audio output (connector) AUDIO OUT or HEADPHONE).
2. The other end is inserted AUX IN on the Alice column (or in the adapter).
3. On the TV remote in the Sound menu → Sound Output: Choose Audio Out (3.5mm).
4. In the column, turn on External Source mode (voice command: “Switch to” AUX»).

Cons of the method:

• ⚠️ The sound quality is worse than the HDMI (analogue signal is subject to interference).
• ⚠️ You will have to manually switch the sound source on the speaker.
• ⚠️ Voice control of the TV is not supported.

💡

Analog connection via 3.5 The only option for Xiaomi TVs 2016-2017 years (e.g. Mi) TV 3). To improve sound quality, use a cable with gilded connectors and a minimum length (up to a maximum of two). 1.5 ).

6. Method 5: Controlling the TV through Alice (voice commands)

If you connect your speaker to your TV, but you want to control your TV voice (turn on, switch channels, adjust volume), you will need additional tuning through the Mi Home ecosystem. This method only works for Xiaomi TVs with Mi AIoT support. TV Q, Xiaomi TV A and newer).

Step-by-step:

1. Install Mi Home and Yandex apps on your smartphone.
2. In Mi Home, add the TV to the list of devices (click on it). + → Television → Xiaomi).
3. In the application Yandex go to the “Smart home» → «Add the device» → «Xiaomi and log in through your Mi Account.
4. After synchronization, tell the column, "Find my devices." It should detect the TV.
5. You can now use the commands: “Switch on the TV” / “Switch off the TV”; “Grow up the volume on the TV”; “Open Netflix on the TV” (if the application is installed).

If the column can't see the TV:

• 🔄 Reboot both devices.
• 📱 Update Mi Home and Yandex apps to the latest versions.
• 🌐 Make sure that the TV and speaker are connected to the same Wi-Fi network.

⚠️ Attention: Voice control via Alice does not support switching HDMI-Sources (e.g., Switch to the console) require a separate setup via the Mi Remote Controller.

7 Problem Solving: What to Do When There's No Sound

If after connecting the column Alice does not play the sound from the Xiaomi TV, check the following points:

If none of the methods helped, reset the settings:

• For TV: Settings → Device Preferences → Reset → Factory data reset.
• For column: in the Yandex application select the device → «Resetting settings».

Alternatively, if your Xiaomi TV doesn’t support any of the methods described, consider buying a Bluetooth transmitter with optical input (e.g., Creative). BT-W5). It connects to Optical Out on TV and transmits sound to the speaker without loss of quality.

FAQ: Frequent questions