The integration of ecosystem products from different manufacturers often raises questions, especially when it comes to popular Samsung Galaxy Buds and Xiaomi smartphones. Although both devices run on the Android operating system, software constraints can create the illusion of incompatibility. However, using the right tools and methods, you can easily achieve full synchronization and access to all the functions of the audio device.
In this guide, we will take a closer look at the pairing process, look at the nuances of installing special software, and offer solutions for typical connection errors, learn how to activate noise cancellation, adjust touch control, and update the firmware of headphones, even if they are not native to your phone.
You don’t need a deep technical knowledge to get started, but it’s important to follow the sequence of actions. Particular attention should be paid to the versions of the MIUI or HyperOS operating system, as this may determine the choice of connection method.
Preparation of equipment and compatibility check
Before you start pairing, make sure your hardware is ready to go.compatibility of Galaxy Buds models with Xiaomi devices is confirmed for most versions, including Live, Pro and Plus.However, the basic requirements for the Bluetooth version remain unchanged for stable connection.
Make sure your headphones are at least 20-30% charged. Low charge can cause installation to interrupt or incorrectly display battery status in the Android system. It is also recommended to reboot the Xiaomi smartphone before setting up to clear the Bluetooth module cache.
Check the up-to-date system updates on your phone. Often, manufacturers will release patches that improve wireless connection stability. Go to settings and select About Phone → MIUI version to check for updates.
⚠️ Note: If your headphones have previously been paired with another Samsung device, they may automatically try to connect to it when turned on.It is recommended to temporarily disable Bluetooth on an older device or remove the headphones from its memory list.
An important aspect is the Bluetooth version. To work with all functions, including the SSC (Samsung Scalable Codec), it is desirable to have Bluetooth 5.0 and higher. Although basic audio transmission will work on older versions, quality and stability may be reduced.
Use the official Galaxy Wearable app
A key element for full-fledged headphones is the installation of the branded Galaxy Wearable app. Without this software, you will be able to use the headphones only as a normal headset, losing access to the equalizer, gesture settings and firmware updates.
The installation process may vary depending on the model of your Xiaomi smartphone.In some cases, the app is available in the Google Play Market, but often it is hidden to devices other than Samsung. APK-file.
Once installed, launch the app and provide all the permissions you request. Galaxy Wearable requires access to location, microphone and memory to properly track and save audio profiles. Denial of rights can lead to errors when searching for the device.
☑️ Pre-installing check
When you first start up, the app will scan the available devices. Put the headphones in the case, open the lid and press the pairing button if automatic detection fails. Follow the instructions on the screen to complete the setup.
Step-by-step instructions for pairing devices
The process of connecting headphones to a Xiaomi smartphone requires care, especially during the initial familiarization stage of the devices. First activate the pairing mode on the headphones themselves. To do this, place them in the charging case, open the lid and press the touch panels of both headphones simultaneously (or the button on the case, depending on the model) before the flashing indicator appears.
Next, go to your smartphone settings. Open the Bluetooth section and click Device Search. The list of available gadgets should show the name of your model, such as the Galaxy Buds Pro. Click on it to initiate a connection.
Android will request a pairing confirmation. Once the security keys are agreed, the headphones will be added to my device list, and at this point, the basic audio transmission should already work, but the advanced functionality requires an additional step.
| Model headphones | Method of activating the pairing mode | Indication | Waiting time |
|---|---|---|---|
| Galaxy Buds / Buds+ | Touch the touch panels of both headphones | Blinking red and blue | 3-5 seconds |
| Galaxy Buds Live | Touch the touch panels of both headphones | Blinking red and blue | 3-5 seconds |
| Galaxy Buds Pro | Hold the touch panel for 3 seconds | Blinking red and blue | 5 seconds. |
| Galaxy Buds2 | Hold the touch panel for 3 seconds | Blinking red and blue | 5 seconds. |
If a Xiaomi smartphone doesn’t see the headphones, try bringing them closer to the Bluetooth module (usually the top of the phone) or rebooting the Bluetooth module by turning it off and on in the notification curtain.
⚠️ Warning: Don't press the pairing button too long. If the lights start flashing red, there's been a reset or an error. Then put the headphones in the case, close it and wait 10 seconds before you try again.
What to do if the connection is reset?
Installation of a plugin for a specific model
The Galaxy Wearable app itself is just a shell. To work with a particular headphone model, you need to install the appropriate plugin, and without this component, the application will not be able to recognize the device and offer the desired control interface.
Usually, after successful pairing, the app will prompt you to download the plugin, and if you don't, you'll have to find it manually, and the name of the plugin matches a model like the Galaxy Buds Pro Plugin, and the installation comes from the same source as the main application.
Once the plugin is installed, restart the Galaxy Wearable, and the main menu should display the full charge information of each headphone separately, as well as make available the audio customization tabs, a critical step in accessing ANC (active noise reduction) functions.
💡
Installation APK-files on Xiaomi be sure to allow installation from the "Conductor" or browser through which you download the file. MIUI strictly controls the installation sources and can block the process without the express permission of the user.
Some versions of the HyperOS shell may need to allow auto-run for the Galaxy Wearable app, which will prevent the process from turning off in the background and allow the headphones to automatically connect when removed from the case.
Customization of sound and additional functionality
Once all components are installed successfully, you can access the fine audio setup, and first of all, you can check the noise cancellation, and you can choose the Noise Cancel, Voice Amplification or Off modes on Xiaomi devices, and these settings are maintained and work steadily.
You can choose one of your profiles or create your own, and there's also a Bixby Voice Detect feature (if supported by a region), which automatically turns on transparency mode when you start speaking.
Touch control settings allow you to reassign the touch actions, so you can set up single, double and triple touch, and long-term retention, which is especially useful for music control or activating the Google Assistant voice assistant instead of Bixby.
💡
For maximum sound quality in the Android developer settings (Bluetooth Audio Codec), you can try to force the SBC or AAC codec if interference is observed, although SSC is usually selected automatically when support is available.
Don’t forget to check the headphone software update tab, the headphone software update will allow you to install the latest firmware version, which often contains improvements in connection stability with third-party devices.
Solving and eliminating errors
Even if you follow all the instructions, you can have technical difficulties, and one of the common problems is that you can desynchronize the sound between the left and right earphones, and you can do a complete reset of the headphones to solve this problem.
To reset, place the headphones in the case, close the lid and wait 5-10 seconds. Then open the lid and press and hold the touchpads of both headphones (or the button on the case) for more than 7 seconds until the indicators flash red.
Another common problem on Xiaomi is connection breaks when you exit sleep mode. This is due to the system’s aggressive energy saving. To fix this, go to Settings → Battery and Performance → App Management, find Galaxy Wearable, and set No Limits mode.
⚠️ Attention: If the headphones continue to behave incorrectly after reset, try Forget the Device in the phone's Bluetooth settings, restart the smartphone and only then perform re-pairing. Simply turning off Bluetooth is often not enough.
It’s also worth considering that some features, such as automatic switching between Samsung devices, won’t work, but basic features like Ambient Sound and playback controls will be available in full.