Modern users are increasingly abandoning wires in favor of complete freedom of movement, and the Xiaomi Mi True Wireless Earphones line is one of the most popular solutions on the market. These compact devices provide high sound quality and stable connectivity, however the initial setup may raise questions for those facing the challenge. TWS-The right pairing procedure is the foundation for the further stable operation of accessories.
The activation process usually takes less than a minute, but requires a certain sequence of actions to prevent synchronization errors. It is important to understand that the algorithms of the Bluetooth protocol can vary depending on the operating system of your smartphone, whether it is Android or iOS. In this article, we will discuss all the nuances, from basic connection to solving complex technical problems.
Before you start setting up, make sure your headphones and case are charged and your phone has a wireless module on. We'll look at not only the standard scenario, but also specific situations where the device refuses to appear on the list of available or only one earphone is running. A deep understanding of the processes will help you avoid common errors.
Preparation of headphones and smartphone for the first inclusion
The first step before any manipulations TWS-The headset should be a battery check, and even if the device is new, it could have run out during long-term storage in the warehouse, so connecting the discharged headphones to the phone often leads to timeouts and detection errors. Place both headphones in a charging case and connect it to a power source at least on the 15-20 minute.
Special attention should be paid to the contacts inside the case and on the headphones themselves. On the surface of metal contacts, there is often a protective film that must be carefully removed before placing the headset in the charging case. If the contacts are contaminated or closed with film, the charging indicator may not light up, which will lead to a false conclusion about the malfunction.
⚠️ Warning: Don't try to turn on your headphones if they're in the cold. A sudden temperature swing can cause condensation inside the electronics, causing a short circuit.
After checking the charge, you need to prepare the smartphone itself. To do this, go to the system settings and find the Bluetooth partition. Make sure that the activation slider is in the "On" position. If you have previously used these headphones with another phone, it is recommended to reset Bluetooth settings on the old device or remove the headset profile from the list of saved devices to avoid address conflicts.
An important aspect of preparation is to clean the list of conjugate devices on the phone. Sometimes a crowded cache of the Bluetooth module interferes with the correct search for new gadgets. Rebooting the smartphone before the connection procedure helps to reset temporary errors of system services and frees up resources for a stable connection.
Step-by-step instruction pairing with Android and iOS
The procedure for connecting Xiaomi Mi True Wireless headphones to Android and iOS smartphones has its own peculiarities, although the general principle remains similar: in both cases, you need to remove the headphones from the case, after which they will automatically go into search mode (usually signaled by a flashing indicator), then the user’s actions depend on the operating system.
For Android smartphone owners, the process is often simplified by integrating Google services. When you open the case lid next to the phone, a pop-up window may appear on the screen suggesting that you connect the device. If an automatic window does not appear, you must manually find the device in the list of available. The model name usually contains the Mi True Wireless marking or a specific model index, for example, AirDots.
☑️ Checking before connection
iPhone users should note that some specific features, such as instantly displaying the battery charge of each earphone in the widget, can only work through the proprietary application. Standard procedure for iOS requires you to go to Settings → Bluetooth and select the device from the list of “Other devices”. After clicking on the headphone name, the system will request confirmation of pairing.
In rare cases, manual input may be required. PIN-The standard code for most Xiaomi devices is 0000. If the system requests the code and you don't know it, try entering four zeros. It is also worth noting that after the first successful connection, the reconnection will occur automatically when the headphones are removed from the case, if the Bluetooth on the phone is active.
Use the Mi Earbuds app for advanced customization
To unlock the full potential of your TWS-It is highly recommended to install the Mi Earbuds app (formerly known as Mi True Wireless Earbuds). This software not only allows you to track the level of charge with high accuracy, but also to configure the equalizer, update the firmware and change the purpose of touch buttons. Without this application, many advanced features remain unavailable.
Once you install the app and connect the headphones, open the device management menu, where you can see the exact percentage of charge of the left and right earphone separately, as well as the charge of the case itself. The application also displays the version of the software, which is critical to fix bugs that may have been detected by the manufacturer after the device went on sale.
Why update the headphone firmware?
One of the key features of the app is to set up touch control, so you can assign different actions to a single, double or triple touch, and also to a long-term finger retention, for example, on the right earphone you can assign the activation of the voice assistant, and on the left you can switch the noise reduction modes or call the last number.
The app also has a headphone search feature, so if you lose one of your headphones indoors, turning on the feature will make it emit a loud beep, which will make it much easier to search, and you can reset it to factory settings if standard methods don't help solve connection problems.
Compatibility table and technical specifications of the connection
Understanding the technical specifications of Bluetooth protocols helps users understand the limitations and capabilities of their devices. Not all codecs are supported by both devices at the same time, so it’s important to know which codec your phone and headphone bundle uses to deliver the best quality audio stream.
| Parameter | Meaning/Description | Influence on the user |
|---|---|---|
| Bluetooth version | 5.0 / 5.2 | Provides stable connection at a distance of up to 10 meters and low power consumption. |
| Supported codecs | SBC, AAC | AAC delivers the best sound quality on Apple devices, SBC is the universal core codec. |
| Protection class | IPX4 | Protection from splashes and sweat, but not suitable for diving or swimming. |
| Time to work. | 4-5 hours (no case) | Depends on the volume and use of active noise reduction functions. |
It's worth noting that sound quality is directly dependent on the codecs you support. If your smartphone supports AAC codec and your headphones do, the sound will be transmitted with minimal loss. If you use only the basic SBC codec, the quality may be lower, especially when playing complex music compositions with a large dynamic range.
💡
For the best sound quality on your iPhone, make sure that the AAC codec is selected in your Bluetooth settings, as iOS does not support aptX.
IPX4 protection means that headphones can withstand accidental rain or intense sweating during exercise, but this does not make them waterproof: wash them under the tap or drop them into the pool absolutely impossible, as the water will damage the speakers and battery.
Problem Solving: Headphones don’t connect or work one at a time
One of the most common user problems TWS-The headset is a desynchronization of the left and right headphones, where the sound comes from only one channel. This often happens if one of the headphones discharged faster than the other or was removed from the case at different times. To correct this, you need to perform a reset and repair procedure.
To start, remove the headphone profile from your phone's Bluetooth memory ("Forget the device" or "Unpair the pair"). Then place both headphones in the case, close the lid and wait 10 seconds. After that, remove both headphones simultaneously. If they are not synchronized with each other (usually the indicator of one flashes, and the other is constantly on or flashing at a different frequency), you will need a full reset.
💡
If one earpiece is quieter than the other, wipe the speaker grid with a soft dry toothbrush, often the problem is a banal earwax clogging the sound channel.
Full reset on Xiaomi models is usually done by holding the touch zones on both headphones for a long time (about 20-30 seconds) or by pressing the case buttons 5 times (depending on the model). After the reset, the headphones will go into search mode, and you will have to connect them to the phone as a new device, finding them in the list of available ones.
⚠️ Warning: When you complete a full reset, all saved settings and pairing history are deleted. Make sure you're ready to reconnect your headphones to all your devices.
Another common problem is interference with Wi-Fi routers or other Bluetooth devices, in which case you can step away from the source of interference or temporarily turn off the phone's Wi-Fi to establish a stable connection. Once you successfully pair Wi-Fi, you can turn it back on.
Headphone care and battery life extension
The lithium polymer batteries used in Xiaomi Mi True Wireless are sensitive to operating conditions. To maximize battery life, it is not recommended to discharge the headphones and case to zero regularly. The optimal mode of operation is to charge at a balance of 15-20%. Deep discharge can lead to irreversible reduction in capacity.
Headphone hygiene is not just a matter of comfort, but also of the device's technical health. Earwax and dust can clog microphones and speakers, impairing sound quality and noise reduction. Regular cleaning with dry soft fabric and cotton swabs will help keep acoustic properties high.
Keep your headphone case dry, away from direct sunlight and heat sources. High temperatures destroy battery chemistry faster than cold. If you don't plan to use the headphones for a long time (over a month), charge them up to 50-60% and turn them off (if there's a feature), or just leave them in the case, periodically checking the charge every few months.
Compliance with simple rules of operation will allow your headphones to serve faithfully for many years, maintaining sound quality and stability of connection. Proper care of contacts and battery is the guarantee that you do not have to look for a replacement ahead of time.