How to connect Xiaomi Mi True Wireless Earbuds Basic 2

Modern wireless gadgets from Xiaomi have gained popularity due to the excellent ratio of price and quality, but the process of their initial configuration for beginners often raises questions. Basic 2 series models do not have the usual pairing button on the body, which confuses users who are used to other electronics manufacturers. Proper execution of the sequence of actions at the first start guarantees stable operation of the Bluetooth module and no desynchronization of channels in the future.

In this detailed guide, we will break down the intricacies of how Mi True Wireless Earbuds Basic 2 interacts with Android and iOS smartphones. You will learn how to properly enter pairing mode, reset to factory settings if necessary, and optimize the audio device for maximum comfort. Following these instructions will avoid common mistakes, such as connecting only one headphone or not being able to find the device in the list of available networks.

Before you start, make sure your headphones are fully charged, as a discharged battery can prevent Pairing mode from starting correctly.It is also recommended to update your smartphone operating system to the latest available version to eliminate software conflicts of Bluetooth drivers. Only after preparing the equipment can you proceed to the direct synchronization procedure.

Preparation of headphones for the first turn on

The first step in the setup process is to properly activate the device from the transport mode. When you take the Xiaomi Mi True Wireless Earbuds Basic 2 out of the box, they can be turned off to save battery power during storage. To start, you need to remove both headphones from the charging case at the same time or alternately, after which they must automatically turn on, as signaled by a light.

If you don't automatically turn on, you need to manually activate the touch panels. Each earphone has a sensitive area on it that you need to hold for 5-7 seconds. At that point, you'll hear a voice message "Power on," and the LED light will flash white, indicating that the device is ready to work. It's important to wait for the white blink, because red indicates low charge or charging.

⚠️ Warning: If the light is always on red, the device is dead. Connect the case with the headphones to the power source on the 15-20 minutes before attempting to switch on.

The key to this is to synchronize the left and right headphones with each other, and when the first headphone is turned on, the Master headphone (usually the right one) must find the Slave headphone (the left one), visually, the indicators stop flashing quickly and start flashing less often or go out, waiting for a phone connection, and only after the headphones "find" each other, they become visible to external devices.

💡

When you first turn on, keep the headphones close to each other (at a distance of no more than 10 cm) so that they can synchronize with each other before searching for the phone.

Matching with Android devices

The Android operating system provides ample opportunities to manage peripherals, but the search process can vary depending on the manufacturer's shell version. Once the headphones have gone into standby mode (blinking white indicator), unlock your smartphone and lower the notification curtain. Press and hold the Bluetooth icon to go to the extended wireless network settings menu.

In the list of available devices, you need to find the entry "Mi True Wireless EBs Basic 2." Clicking on this name initiates a pairing request. In some cases, the system can request confirmation via the link. PIN-code, the standard value for Xiaomi devices is "0000", but most often the connection occurs automatically without entering numbers.

It’s worth considering that some smartphone makers use their own interface add-ons that can hide new devices until visibility is manually activated. If the search doesn’t work right away, try rebooting the Bluetooth module on your phone by turning it off and on again. It’s also helpful to delete old records of previous connections from your phone if they’re still there.

Configure the connection on the iPhone (iOS)

Users of the Apple ecosystem can also easily use Xiaomi products, although the pairing process has its nuances. Unlike native AirPods headphones, which have an instant customization window, Basic 2 models require a standard search procedure through system settings. After activating the headphones (white blinking), go to the Settings → Bluetooth menu on your iPhone or iPad.

Make sure the Bluetooth slider is active and wait for the device to appear in the "Other Devices" section. The name can be displayed as "Mi True Wireless EBs Basic 2" or simply "Basic 2." Tap the name to start pairing. Once the device is successfully connected, the word "Connected" will appear in the device status and a notification will sound in the headphones.

For stable operation, it is recommended to disable the Auto Switch function in Bluetooth settings if you plan to use headphones with only one device. This will prevent accidental audio interception by another Apple gadget nearby, such as an iPad or Mac. In addition, you can configure the headband function (left / right channel) in the special features menu on iOS if the standard distribution does not suit you.

⚠️ Note: iOS may not display the exact charge level of each headphone in the battery widget, the total charge of the case or the last active headphone.

Solving problems with connecting one headphone

One of the most common problems owners Xiaomi Mi True Wireless Earbuds Basic 2 is a situation where the phone sees and connects only one headphone (usually the right), while the second is silent. This occurs due to the desynchronization of the stereo pair, when the headphones “forget” each other and work in mono mode.

The reset procedure is done as follows: place both earbuds in the charge case, then remove them. Quickly press 5 times on the touchpads of both headphones simultaneously (or alternately, but quickly) until the indicators flash red twice. Then put them back in the case and close the lid for 10 seconds. When re-extracting, the headphones should automatically reconnect to each other.

After a successful reset, remove the device from the Bluetooth list on your smartphone (“Forget the device”) and pair it again, as when you first bought it. If the problem persists, check the charging contacts in the case — perhaps one of the headphones just didn’t charge and the battery ran out. Cleaning contacts with a dry cotton swab often solves the problem of not charging.

💡

Double flashing of the red indicator after 5 times pressing is the main sign of a successful reset of Xiaomi headphones.

Management and additional functions

The Basic 2 has touch controls that allow you to control music playback and calls without having to reach your phone. However, the button functionality is limited to basic commands, and advanced customization (such as calling a voice assistant) may require third-party applications. Standard commands are universal and work on any device.

For the convenience of users, we have compiled a table of basic commands for managing the touch panels of headphones. Note that the interval between clicks must be fast, but not too frequent for the system to have time to recognize commands.

For more in-depth customization, including changing retention features or checking the firmware version, it is recommended to install the Mi Earbuds Basic app from Google Play Market.This app allows you to see the real charge of each headphone in percentage and rename the device in the system. However, it is worth remembering that the application may not work on all models of third-party smartphones.

Maintenance and extension of service life

For Xiaomi Mi True Wireless Earbuds Basic 2 to serve you long and delight with quality sound, you need to properly care for them. The main enemy of electronics is moisture and dirt. Regularly wipe the body with a soft dry cloth, especially the speaker mesh, which can be clogged with earwax, which leads to a decrease in volume.

The charge case also requires attention. Contacts inside the case sockets and on the headphones themselves become oxidized over time. Once a month, it is recommended to gently wipe them with a cotton swab slightly soaked in alcohol (necessarily squeezed!), This will ensure reliable contact and full battery charging, preventing the situation when the earphone shows charge, but quickly discharges.

Keep the case dry, away from direct sunlight and heat sources. Lithium polymer batteries used in headphones degrade at extreme temperatures. If you don't plan to use the headphones for long periods (more than a month), charge them up to 60-70% and remove them from the case, storing separately.