The integration of ecosystem devices from different manufacturers often raises questions among users who want to optimize their gadgets. The combination of the popular Samsung Galaxy Tab tablet and high-quality acoustics from Xiaomi is a classic example of such cross-platform interaction. Modern data standards allow you to configure the connection in seconds, if you know the right algorithm of actions.
The main protocol for transmitting audio signals is Bluetooth, which is built into the vast majority of modern mobile devices. Despite the universality of the standard, the process of primary pairing can have its nuances depending on the version of the Android operating system and the shell One UI. Proper setting ensures not only stable sound, but also the correct operation of the microphone during conversations.
In this guide, we will take a detailed look at all the steps of connecting, from activating detection mode to fine-tuning your audio profile. You will learn how to avoid common errors and what to do if devices can’t see each other. A deep understanding of the process will allow you to enjoy your favorite music or movies without delay or interruption.
Preparation of devices for pairing
Before starting the procedure, make sure that both devices are ready to work. Charge Xiaomi headphones and Samsung tablet at least 20-30%, as in search mode energy consumption increases significantly. Make sure that there are no physical barriers between the gadgets, and the distance does not exceed one meter for a confident signal.
On the tablet, check if the wireless module is enabled, and then drop the swipe notification curtain from top to bottom and find the Bluetooth icon. If it's gray, tap it to activate the function. In some cases, you need to go to full settings through the Settings menu → Connections for more detailed management.
⚠️ Warning: Make sure your Xiaomi headphones aren't currently connected to another smartphone or laptop.Active connection to a previous device may block the ability to be detected by a new Samsung tablet.
An important step is to reset previous settings if you've previously tried pairing unsuccessfully. On a tablet in the list of Bluetooth devices, find the name of your headphones, click on the gear next to it and select "Forget" or "Disable." This will clear the connection cache and allow you to start the process from a clean slate.
💡
Before you start setting up, update the Xiaomi Earbuds or Mi Home app on your phone to check for new headphone firmware, which will improve the stability of the work.
Activation of the detection mode in Xiaomi headphones
The process of putting the headphones into visibility mode depends on their form factor. For models with a neck rim, such as the Xiaomi Mi Neckband, it is usually enough to press the on button for 5-7 seconds before the flashing indicator appears, at which point the device broadcasts a signal for search.
With the fully wireless models of the Redmi Buds or Mi True Wireless series, the situation is a little more complicated: if this is the first on, they automatically go into mating mode when removed from the case, and if the headphones have been paired before, you must force the search to start.
- 🎧 Remove both headphones from the charging case and leave them in the air.
- 🔘 Find the function button on the case of the charging case (usually behind or inside between contacts).
- ⏱ Press this button on 3-5 seconds until the indicator on the case begins to flash quickly in white.
- 👂 Alternative method: touch the touch zones on both headphones simultaneously and hold for about 5 seconds.
The quick flashing indicator is a universal signal that the pairing mode is active. Now within 30-60 seconds you need to perform actions on the tablet, since the detection mode often has a timeout and is turned off to save energy.
☑️ Checking the readiness of headphones
Search and Connect via Samsung Settings
Once you activate the accessory search mode, pick up your Samsung Galaxy Tab tablet. Go to the Settings menu, then select the Connection section and tap the Bluetooth item. Make sure the switch at the top of the screen is activated.
The tablet will start with an automatic scanner of the surrounding space. At the bottom of the screen, in the "Available Devices" section, in a few seconds, the name of your headphones should appear. It can look like Redmi Buds 3, Mi True Wireless EBs Basic or just Xiaomi.
| Model headphones | Displayed name | Type of indicator | Response time |
|---|---|---|---|
| Xiaomi Mi True Wireless 2 | Mi True Wireless 2 | White flashing | 1-3 seconds |
| Redmi Buds 3 Pro | Redmi Buds 3 Pro | Green flashing | 2-5 seconds |
| Mi Neckband Pro | Mi Neckband Pro | Blue-red | 1-2 seconds |
| Xiaomi FlipBuds | Xiaomi FlipBuds | White flashing | 3-6 seconds |
Tap the device name in the list. The tablet screen will display a system window requesting the pairing confirmation, where the code can be displayed, or just the "Plug" button. Press it to complete the procedure.
After successful connection, the indicator on the headphones will change the nature of the blinking to rare or go out, and in the status bar of the tablet there will be an icon of the headphone battery. Android system automatically assigns the device to output media sound and phone calls.
Sound setting and additional functions
After a successful connection, you should pay attention to the quality of audio transmission. Samsung tablets support various codecs such as SBC, AAC and aptX. To activate high-quality sound, go to Settings → Connections → Bluetooth, click on the gear next to the connected headphones and select Bluetooth Codec.
For a deeper setup, it is recommended to install the official Xiaomi Earbuds app from the Google Play store.It allows you to update the headphone firmware, adjust the equalizer, change the purpose of touch touch touches and enable low latency mode (Game Mode).
⚠️ Attention: Game Mode significantly increases the battery consumption of headphones. Use it only when playing games or watching videos, turning off for music.
Samsung tablet owners can also use the built-in Dolby Atmos equalizer. It is in the Settings menu → Sounds and vibration → Sound quality and effects. The combination of Samsung’s Dolby technology and Xiaomi hardware can give an interesting result, but sometimes it’s better to leave the audio processing to the headphones themselves.
Secrets of the aptX codec
Solving Connection Problems
Despite the standardization of processes, users may face a situation where the tablet does not see the headphones or the connection is constantly interrupted, most often the problem lies in a software failure or a crowded cache of the Bluetooth module.
First, try rebooting both devices. This trivial action resets temporary driver errors. If that doesn't work, reset your network settings on your tablet. Go to Settings → General Settings → Reset → Network Settings Reset. Note that this action will delete saved Wi-Fi passwords but will not affect personal files.
- 🔄 Make sure that the tablet is not on flight mode and turned off Wi-Fi (sometimes the frequencies of 2.4 GHz conflict).
- 🔋 Check the charge level: at low charge, some Xiaomi models limit the power of the transmitter.
- 📱 Remove the device profile from the Bluetooth list on the tablet and repeat the pairing procedure again.
- 🏭 Reset the headphones to factory settings (usually by pressing a button on the case on the 10-15 second-light).
If there is sound but it is interrupted or of poor quality, check if there are any background applications running that actively use the network, and also make sure there are no thick walls or working microwave ovens between the receiver and transmitter.
💡
Resetting your network settings on a tablet is the most effective way to solve Bluetooth software errors if a simple reboot doesn’t help.
Managing two devices and multipoint
Many of Xiaomi’s current headphone models support Multipoint technology, which allows you to connect to two devices at the same time, which means you can watch a movie on a Samsung tablet, and when you call in on your smartphone, the sound automatically switches to a conversation.
To activate this feature, first connect the headphones to your smartphone, and then search and connect from your tablet without turning them off. Some models require multipoint functionality to be enabled through a companion app on your phone.
It is important to understand that when working in two devices, audio is transmitted from only one source, switching occurs automatically when you pause or receive a call, manual switching is possible through the audio output menu in the curtain of Android notifications.