Xiaomi Redmi AirDots 2 wireless headphones (also known as Mi True Wireless Earbuds Basic 2) have become one of the most popular budget solutions in the audio market. Their compactness and ease of use attract millions of users, but the initial setup often raises questions among beginners. The process of synchronizing the device with a smartphone seems difficult only at first glance, but in fact it takes only a couple of minutes.
In this article, we will discuss in detail the algorithm of actions for successful pairing, look at the features of working with different operating systems and offer solutions for typical errors. Properly following the instructions steps ensures stable Bluetooth connection and high sound quality. If you have just unpacked your gadget or encountered difficulties in reconnecting, this material will be a comprehensive guide for you.
Before you start setting up, it's important to make sure your headphones are fully charged. Low power levels in the case can lead to unstable communication module operation or inability to enter pairing mode. Let's look at the preparatory stage more closely to eliminate any technical obstacles.
Preparation of headphones for the first turn on
The first step is to check the battery charge. The indicators on the front panel of the case show the current energy level: red is on, charging is on, white is on, full charge is on, not burning - the device is discharged or charged. To activate the standby mode, you need to remove both earphones from the charging case.
Once removed, the devices will automatically go into readiness for (pairing), signaled by a flashing white indicator on one of the headphones (usually right, but not always), it is important not to insert them back into the ears or case until the adjustment procedure is completed, as this may interrupt the process.
- 🔋 Make sure the indicators on the case and headphones respond to the extraction.
- 📱 Charge your smartphone to at least 20% for stable Bluetooth.
- 🔌 Check the integrity of the contacts on the headphones (they should be clean).
⚠️ Warning: If the lights don't flash after they're removed, maybe the headphones are dead. 15-20 minutes before trying again.
Modern Xiaomi models are equipped with touch panels that are also activated when you first contact the ear, but for initial pairing, just remove them from the case. If you use the device for the first time, the factory film from the sensors may not be removed, which sometimes affects responsiveness, but not the connection process.
Matching with Android devices
The Android operating system provides the most native integration with the devices of the Xiaomi ecosystem. First, you need to open the smartphone settings and go to the Bluetooth section. Make sure that the slider activation of wireless modules is translated into the position "On".
Now click the Device Search button or just wait for the system to scan the ether. The list of available gadgets should appear as Redmi AirDots 2 or Mi True Wireless EBs Basic 2.
In some cases, the system may request a pairing confirmation via a pop-up, press OK or Connect. Once the synchronization is successful, the voice assistant will notify you of the status: Connected in English or a similar phrase in other languages.
It's worth noting that after the first successful connection, further synchronization will occur automatically. You just have to open the case cover, and the headphones will find the last device used if Bluetooth is on.
Configure the connection on the iPhone (iOS)
Apple appliance owners can also use these headphones without any problems, although the process has its own nuances: Open the settings on your iPhone or iPad and select the Bluetooth partition. Make sure the feature is active.
Remove the headphones from the case to start the search mode. In the list of "Other devices" on the screen of the smartphone will appear Redmi AirDots 2. Tap the name to start pairing. iOS can request permission to connect accessories — confirm the action.
☑️ Checking before connection
Once connected, you can adjust control via standard iOS tools or use the Xiaomi Earbuds app (if available for your model), although the basic functionality works without it.The volume on the iPhone is adjustable regardless of system volume in some scenarios, which is worth considering.
⚠️ Note: Playback control (pause/start) may work differently on iOS than on Android due to operating system limitations.
If the sound is coming after the connection but the microphone is not working, check the privacy settings in the Privacy → Microphone section and make sure that access is allowed for the required applications.
Connection to laptop and PC
Using Redmi AirDots 2 with a computer requires a built-in or external Bluetooth adapter. On Windows 10 and 11, the process begins with opening the notification center or going to Settings → Devices → Bluetooth. Activate the switch if it is turned off.
Click on "Add Bluetooth or other device" and select the first item in the list. The computer will start a search. As with smartphones, Redmi AirDots 2 will appear in the list. Click on the title.
The process of installing drivers usually happens automatically. However, if there is no sound, it may have connected as a headset (with low sound quality for calls) rather than a stereo device, in which case you need to click on the speaker icon in the tray and select Redmi AirDots 2 Stereo.
| Parameter | Meaning/Description | Note |
|---|---|---|
| Protocol | Bluetooth 5.0 | Ensures the stability of communication |
| Codecs. | SBC, AAC | AAC is preferred for iOS |
| Range. | 10 meters | No problem. |
| Delay. | ~100-150 ms | Normal for video, can interfere with games |
What if the PC can’t see the headphones?
For macOS users, the algorithm is similar to iOS: go to System Settings → Bluetooth, find the device and pair. Mac usually recognizes the AAC codec without problems, ensuring good sound quality.
Addressing common problems
Despite its simplicity, there are times when Redmi AirDots 2 doesn't connect or doesn't work properly, and one of the common problems is de-synchronizing the left and right earphones when the sound comes from only one channel, and this is solved by a reset procedure.
To reset, place both headphones in the case, making sure they are charging (red lights are burning). Then remove them and quickly press the touchpads of both headphones 5 times at the same time (or 2 times, depending on the firmware version, until the indicators blink 3 times red).
- 🔄 Do “Forget the Device” in your phone’s Bluetooth settings.
- 🔌 Put the headphones in the case and close the lid for 10 seconds.
- 📲 Start searching for devices on your smartphone again.
Another problem is quiet noise or interruptions, and often it's caused by interference from 2.4GHz Wi-Fi routers or microwave ovens, try to move away from the source of interference, and check if the headphones are wearing silicone protective pads that override the speaker grid.
⚠️ Warning: If the headphones continue to behave strangely after reset, try connecting them to another smartphone. This will help you understand whether the problem is in the headphones or in your phone.
💡
Hard Reset solves 90% of programming errors in pairing and channel desynchronization.
If the sound is interrupted in just one headphone, the charging contacts in the case may have become contaminated. Wipe them with a dry cotton swab. The lack of contact causes one earphone to discharge faster and turn off, disrupting the stereo pair.
Management and useful functions
Once you've successfully connected, you have a very easy way to control, and touch panels respond to touch, and usually, one tap of the right earphone pauses the track or answers the call, and the left one activates the voice assistant.
Double tapping the right earphone often switches tracks and the left earphone adjusts volume (in some firmware versions). Triple tapping can cause a voice assistant (Google Assistant or Siri), and it's important not to confuse these commands so as not to cause a reset.
💡
To extend battery life, try not to discharge the headphones to zero regularly. Lithium polymer batteries better retain capacity during charging cycles from 20% to 80%.
Remember to update your firmware if the manufacturer releases updates through proprietary applications. This can improve connection stability and noise reduction quality when calling. Although the base model of Redmi AirDots 2 does not have active noise cancellation (ANC), software improvements can optimize the microphone.
In conclusion, the correct setting of Redmi AirDots 2 provides a comfortable listening to music and communication, following these instructions, you will easily master all the functions of the device.