Modern smartphones like the Xiaomi Redmi 8 offer users a wide range of multimedia experiences, and wireless acoustics have become the standard of comfort. Lack of wires allows you to move freely, exercise or simply sit comfortably in a chair while your favorite track plays high quality. However, the process of primary pairing or reconnection sometimes causes difficulties for owners of devices based on the MIUI shell.
In this article, we will take a detailed look at all the steps of setting up a Bluetooth headset, from activating the module to fine-tuning the audio profile. You will learn how to avoid common errors and what to do if the phone stops seeing a new device. The correct configuration of data transmission parameters will ensure a stable connection without delays and breaks.
It’s worth noting that Android’s algorithms may vary slightly depending on the version of the firmware installed on your gadget. However, the basic logic of actions remains the same for the entire Xiaomi ecosystem. By following the steps carefully, you can enjoy wireless sound within minutes of unpacking the accessory.
Preparation of the device and accessory for pairing
Before you start looking for devices, you need to make sure that both components of the system are ready to work. Charge the headphones and the Redmi 8 smartphone at least 20-30%, as the process of active search and connection can consume a significant battery life. Low charge often leads to unstable operation of the radio module.
Turn on the headset and put it in pairing mode. For most models, this is done by holding the power button or a special button with a Bluetooth image for a long time until the indicator flashes blue or red-blue, at which point the gadget becomes visible to external devices.
Make sure your smartphone is not activated and that the Bluetooth module is not blocked by system restrictions.Sometimes, MIUI energy-saving features can limit the background work of search services, so it is better to temporarily turn off the energy saving mode for the setup procedure.
⚠️ Attention: If the headphone light flashes slowly or is on with a steady light, the pairing mode is most likely not activated.
Check if the headset is currently connected to another phone or tablet. Many models automatically try to reconnect with the last device used, ignoring new connection requests. Turn off Bluetooth on all nearby gadgets to eliminate address conflicts.
Activation of Bluetooth module in MIUI
The MIUI shell interface offers two main ways to access wireless network settings. The fastest method is to use the control panel. Swipe from top to bottom of the screen to open the notification curtain, and find the Bluetooth icon. If it's gray, click on it once to activate or pinch to go to the menu.
The alternative route is through the main system settings menu, so find the gear icon on your desktop or app list and go to Bluetooth, where you have the main switch that you need to activate, and when you turn it on, you'll automatically search for available devices within range.
The same menu displays a list of previously connected gadgets, and if you've already used this headset with this phone, it may appear in the "My Devices" list immediately after you turn it on, in which case the connection will be established automatically, and manual pairing will not be required.
Note the Bluetooth version your smartphone supports.The Xiaomi Redmi 8 features a 5.0 module, which delivers high data rate and low power consumption.Older headsets may run slower, but they are fully compatible thanks to backward compatibility standards.
The process of searching and connecting the device
Once you activate the module, you'll see a list of available devices on your smartphone screen. Find the name of your headset in the list. It usually matches a brand or model, like AirDots, JBL or Sony. Click on the name to initiate the mating procedure.
The system may request confirmation of pairing or input PIN-The standard code for most devices is 0000 or 1234. In modern models, this step is often skipped, and the connection is established instantly after the user confirms on the smartphone screen.
☑️ Checklist of successful connection
When you successfully connect, you'll hear a distinctive beep in your headphones, and on your phone screen, the status will change to "Connected," while at the same time, a small battery icon with the headphone charge level will appear in the status bar, if the model supports this telemetry transmission.
If a name appears on the list of devices, but an error occurs when you try to connect or the process freezes, try clicking on the gear next to the device name (if it is in the list previously) and select "Forget the device." Then repeat the search again, starting with a clean slate.
Customization of sound and additional functions
After successful pairing, it is recommended to check the audio output settings. Go to the Settings → Sound and Vibration menu to make sure that the multimedia sound is not turned off. Some users accidentally set the minimum volume for media files, leaving only the notification system to be loud.
Owners of original accessories from Xiaomi can access the expanded settings menu through the pop-up window when connected or through the MIUI Earbuds app. Here you can adjust the touch control, change the equalizer and update the firmware of the headphones themselves.
| Parameter | Description | Recommendation |
|---|---|---|
| AAC codec | Audio compression quality | Included by default |
| Absolute sound. | Synchronizing Volume | Insert for convenience |
| HD Audio | High resolution. | Depends on the model. |
| Battery widget | Charge mapping | Add to the desktop |
For advanced users, there is a developer menu where you can force the Bluetooth codec to change, and you have to click on the build number several times in the About Phone section to access it, but you don't have to change these settings without having to, because this can lead to unstable sound.
Secret codes for diagnosing sound
Solving problems with visibility and stability
One of the common problems is when the phone stops seeing the headphones or the connection is constantly broken.This can be caused by radio interference from Wi-Fi routers or microwave ovens operating at 2.4 GHz. Try to move away from the source of interference or temporarily turn off Wi-Fi on your smartphone.
If the problem is software-based, resetting network settings will help. Go to Settings → Connection and Sharing → Reset Wi-Fi, mobile networks and Bluetooth. Note that this action will delete all stored Wi-Fi passwords and lists of associated devices, but often resolves complex driver conflicts.
⚠️ Note: Resetting your network settings will not delete your personal files, photos or contacts, but you will have to re-enter passwords from home and working Wi-Fi networks.
Make sure the phone has the latest available system update installed. Xiaomi regularly releases security patches and enhancements for communication modules. Check for updates in About Phone → MIUI version.
Optimizing work for different scenarios
Minimal sound latency is critical for gamers, and some Xiaomi models have a "Game Mode" in their Bluetooth settings that prioritizes data rate over coding quality, allowing you to synchronize shots and steps in games with the image on the screen.
When watching movies through streaming services, picture and sound quality is more important than latency. Make sure the app has a high stream quality. If you use high-resolution codecs (LDAC, aptX HD), make sure both devices support the same standard.
The quality of the microphone is important for calls. If the person complains about a quiet voice, check in the Bluetooth settings if the phone is selected instead of the headset as the source of sound during the conversation.
💡
The stability of the connection depends on the distance: in a room without obstacles, the range is up to 10 meters, but walls and metal structures can reduce it several times.