How to connect wireless headphones to Xiaomi: step-by-step instructions

Xiaomi and Redmi smartphones have long since ceased to be just communication devices, becoming powerful multimedia centers where sound quality is emphasized. Many users prefer to abandon wires for freedom of movement, whether during sports, traveling on public transport or working in the office. However, the initial setup of a Bluetooth headset can sometimes raise questions, especially if you change the model of the phone or use new headphones with active noise cancellation.

The process of pairing devices based on the MIUI shell or HyperOS is usually automated and takes seconds, but there are nuances that you should know about in advance. Understanding how to correctly transfer the accessory to detection mode will help avoid unnecessary waste of time and nerves. In this article, we will discuss in detail the algorithm of actions for successful connection, consider frequent connection errors and give tips for improving the quality of audio stream.

Preparation of headphones for the first pairing

Before you look for a device in your smartphone settings, you need to make sure your headset is ready to detect. Most modern models, whether Xiaomi Redmi Buds, QCY or third-party brands like Sony and JBL, automatically go into pairing mode when you first turn on. However, if the headphones have been used with another phone, they need to be forced to switch to this mode, usually requiring you to pinch the touchpad or physical button on the case until the indicator starts flashing blue or white and blue.

It is important to check the charge level before starting the procedure. If the headphone battery is discharged to zero, they may not turn on or enter search mode. Low charge often causes intermittent connection in the first minutes of operation. Make sure that the case or the headphones themselves have at least 20-30% of the energy for stable operation of the Bluetooth module.

💡

If the indicator flashes red, the headphones are discharged - put them on charging before trying to connect.

There is also a specificity for TWS-Sometimes the left and right headphones lose sync with each other, and the phone sees them as two separate devices, so it's recommended that you put both headphones in the charge case, close the lid, wait 10 seconds and remove them simultaneously. This action initiates re-pairing between each other, after which they will become visible to the phone as a whole.

Search and Connect via Bluetooth Settings

After the peripheral is ready, we go to the settings of the Xiaomi smartphone. Open the Settings menu and find the Bluetooth section, which is usually located at the top of the list or in the Connections and Sharing group. Make sure that the activation slider is switched to the On position. The system immediately begins scanning the available devices in range.

The Available Devices list should show the name of your headset. If you see multiple names that are the same, select the one that appears first or has the highest signal strength. Click on the name and a confirmation request for pairing may appear on the screen. In some cases, the system will ask for PIN-The standard value for most devices is 0000 or 1234.

After a successful connection, status will change to Connected, and the headphone battery icon will appear in the status bar if the model supports charge level transfer. Audio stream will automatically switch from the phone speaker to the headset. If this does not happen, click on the gear next to the device name and select the "Use for Media Audio" option.

Use of quick menus and MIUI widgets

Xiaomi smartphone owners can access a faster solution through the control center. Swipe down from the top right corner of the screen (or bottom up, depending on the version of the interface) to open the notification curtain. There you will find a large Bluetooth button. Long-term pressing on it or on the icon of the wireless headset, if it was already connected, will open the list of devices.

The MIUI and HyperOS shells are famous for their visualization. When you connect the brand's original accessories, such as Mi True Wireless Earbuds or Xiaomi Buds, the screen features signature animations showing the charge of the left, right earbud and case. For third-party devices, only the general charge level or standard icon is displayed, which makes monitoring the battery status more convenient and intuitive.

There's also a useful feature in the Bluetooth menu called "Show Charge Levels of Connected Devices," which makes sure it's activated to always see when it's time to put your headset on charge, an option that's especially important for models with little battery life.

Solving Device Detection Problems

Sometimes it just happens that the phone doesn't see the headphones, even though they're in search mode. First of all, check if the headset is connected to another gadget nearby. Connection priority is often given to the last known device. If the headphones are "hanging" on a tablet or laptop, turn off Bluetooth on them or select "Forget the device" in the settings.

The second common cause is a crowded Bluetooth cache on the smartphone itself. The accumulation of temporary files can interfere with the correct scan. Try restarting the phone - this clears RAM and restarts system services. In more complex cases, resetting network settings helps, but this will require re-entering passwords from Wi-Fi.

If the problem persists, reset the headphones to factory settings, usually by holding the touch zones for a long time (about 15-20 seconds) or by using a special combination of taps described in the manual for a particular model.

Customization of sound and codecs in the engineering menu

For advanced users, Xiaomi provides access to advanced Bluetooth settings. The developer menu (which is activated by seven taps on "MIUI Version" in the About Phone section) can find audio codec settings. The standard SBC codec provides basic quality, but if your headphones support aptX, aptX HD or LDAC, you can switch to them manually for Hi-Res audio.

You can also change the absolute volume level in this section, and if you notice that the volume of your headphones and phone is adjustable independently or too quietly, try changing this setting, but remember that activating some high-resolution codecs can increase power consumption and cause the sound to be out of sync in the video.

Remember that for advanced codecs to work, both sides must support them: both a smartphone and headphones. If the headset does not have an aptX certification, turning this option on the phone will not give an increase in quality, but only increase the load on the battery.

Connected Device Management and Security

Once set up, it’s helpful to know how to effectively manage the list of conjugated gadgets. In the Bluetooth menu, Xiaomi allows you to rename connected devices, which is convenient if you have multiple headsets. Click on the gear icon next to the device name and select “Rename.” This will help you quickly identify Office Headphones or Sports Headset.

Also important is security: the phone's visibility mode for other devices is best kept off when you're not planning to transfer files. There's a "Visibility" option in Bluetooth settings that can be time-limited or completely disabled, leaving only outbound connectivity to known gadgets.

💡

Regularly cleaning the list of “Conjugated devices” (removing old gadgets) speeds up the search for new ones and increases the stability of the connection.

In the device-specific settings section, you can also disable access to contacts and call logs if you use the headset for music only, which will increase your privacy, especially when using public or borrowed headphones.

Frequently Asked Questions (FAQ)

⚠️ Note: When you reset your phone's network settings, all stored Wi-Fi passwords and Bluetooth history are deleted.

⚠️ Note: Do not try to connect headphones to your phone while charging through USB-If you use a non-original adapter, interference from cheap power supplies can disrupt the Bluetooth antenna.