Connecting wireless headphones to Xiaomi Redmi Note 10 Pro via Bluetooth: the full guide

Introduction: Why Connecting Headphones Is Important for the Redmi Note 10 Pro

Wireless headphones have become an integral part of everyday life - from listening to music to calling and watching videos. Xiaomi Redmi Note 10 Pro with its powerful Snapdragon 732G processor and Bluetooth 5.1 support provides a stable connection, but even here users face nuances. The wrong connection can lead to audio interruptions, low transmission quality or fast discharge of the headphone battery.

In this article, we will discuss not only basic synchronization steps, but also hidden MIUI settings that will help optimize the work of the headphones. For example, why sometimes the Redmi Note 10 Pro "cannot see" the device even though it is on, or how to turn on the aptX codec to improve the sound. If you use Xiaomi AirDots, Sony WH-1000XM4 or any other model, the instruction is universal, but with the features of the MIUI 12/13 firmware.

We will also discuss compatibility issues: which headphones work best with the Redmi Note 10 Pro, how to check the Bluetooth version on your phone, and what to do if the sound is distorted when playing through YouTube Music or Spotify.

Preparing the phone and headphones for connection

Before you start syncing, make sure both devices are ready to connect. On the Xiaomi Redmi Note 10 Pro, Bluetooth should be enabled and the headphones should be in search mode.

• 📱 On your phone: open the notification panel and make sure the Bluetooth icon is active (blue). If not, tap it. Also check that Visibility for All mode is on (this is important for first connections).
• 🎧 On headphones: put them in pairing mode. For most models, this is a long hold of the power button (until the indicator flashes). Xiaomi AirDots, for example, you need to hold the touch panel for 5 seconds.
• 🔋 Battery charge: If the headphones are below 20%, they can shut down while you're on. Charge them to at least 30%.
• 📶 Interference: Make sure there are no other active Bluetooth devices (such as smartwatches or speakers) around that can cause interference.

Important for the Redmi Note 10 Pro: If you've previously connected these headphones to another phone, reset them. For example, for AirDots Pro 2, this is done by triple tapping the touchpad when it's off.

Step-by-step: how to connect headphones via Bluetooth

Now, the process itself. The instructions are relevant for MIUI 12.5-14 (which are installed on the Redmi Note 10 Pro). If you have a different version of the firmware, the steps may vary slightly.

1. Open Settings on your phone and select the Bluetooth partition (or Connections and Sharing → Bluetooth in some versions).
2. Activate the Bluetooth slider (if it's not already on) and the phone will start scanning the available devices.
3. In the list, find the name of your headphones (for example, Mi True Wireless Earbuds Basic 2) and tap it.
4. Confirm the pairing if a request appears (sometimes you need to enter) PIN-code - default is 0000 or 1234).
5. Wait for the "Connected" message. Now the headphones are ready to use.

If the device doesn't appear in the list, update the search (update icon in the top right corner) or reboot the headphones. On the Redmi Note 10 Pro, it sometimes helps to turn off and re-enable Bluetooth.

Headphones appear in the list of connected devices |

The sound is played without distortion |

The indicator on the headphones stopped blinking (burns constantly)|

In the notification panel appeared the icon of headphones-->

Sound tuning and connection optimization

Once connected, it is recommended to adjust the audio settings for better quality. MIUI has hidden options that many users miss:

1. Open Settings → Sound and vibration → Bluetooth sound quality.
2. Select the connected headphones and install the codec: AAC is optimal for music (used by default); aptX or LDAC is for high quality (if the headphones support); SBC is versatile but with the worst sound.

Activate "Absolute Volume" if you want to synchronize the volume level on your phone and headphones.

For Xiaomi models (such as AirDots 3 Pro), the proprietary Dual Connect feature is available, which allows you to synchronize your headphones with your phone and laptop at the same time.

Settings → Bluetooth → Click on the gear icon next to the headphones → Double connection

💡

If the sound is interrupted while listening to music, try disabling Battery Optimization for the music player app in the App settings. → Permits → Optimizing the battery.

Solving common connection problems

Even after successful pairing, there may be difficulties, and let's look at typical scenarios and ways to address them:

If the problem persists, try resetting the network settings on your phone:

Settings → System → Resetting → Resetting Wi-Fi, mobile network and Bluetooth

⚠️ Warning: Once reset, all the Bluetooth devices and Wi-Fi networks that you've saved will be deleted.

How to Disable and Remove Headphones from Your Phone Memory

If you're not planning on using headphones anymore, or if you want to connect them to another device, you need to properly disable them and remove them from the list of associated devices.

1. Open Settings → Bluetooth.
2. Find your headphones in the list and tap the gear icon (⚙️) near.
3. Select "Disable" (if you need to temporarily terminate the connection) or "Forget this device" (for complete removal).

Once removed, the headphones will disappear from the list and have to be reconnected as if it were the first pairing, which is useful if the device is unstable — sometimes reconnecting solves connection problems.

⚠️ Note: if you simply turn off the headphones without removing them, the phone will automatically connect to them the next time Bluetooth is turned on.This can cause conflicts if the headphones are already paired with another device.

Compatibility: which headphones work best with the Redmi Note 10 Pro

The Xiaomi Redmi Note 10 Pro supports most modern wireless headphones, but some models show better results thanks to optimization in MIUI.

• 🎵 Best choice: Xiaomi AirDots 3 Pro – full compatibility with branded features (for example, LHDC codec for high-quality sound).
• 🎧 Premium segment: Sony WH-1000XM4 Bose QuietComfort 45 – Supports aptX Adaptive, but may require manual codec configuration.
• 💰 Redmi Buds 3 Lite is inexpensive, but with good synchronization.
• 🍎 Apple AirPods: Works but without support AAC At the highest level (due to Apple's restrictions).

For gamers, Xiaomi FlipBuds Pro with low latency (88 ms in Game Mode) is suitable.

Settings → Bluetooth → Click on the headphone icon → Game mode

Additional features: voice assistants and gestures

The Redmi Note 10 Pro allows you to integrate headphones with voice assistants and assign gestures to control.

• 🎤 Voice assistant: double tap on the headphone to call Google Assistant or Alice (if you use Yandex.Music).
• 👆 Gestures: in the Mi Earphones app (for Xiaomi headphones), you can assign actions to swipes on the touch panel (for example, swipe up - increase volume).
• 🔔 Notifications: Headphones can voice incoming messages (configured in Settings) → Notifications → Notification settings for headphones).

To activate these functions:

1. Install a branded app for your headphones (like Mi Earphones for AirDots or Sony Headphones Connect for Sony).
2. Follow the instructions in the app to set up gestures and notifications.

💡

Xiaomi’s branded headphones (like the AirDots Pro 2) support more features when connected to the Redmi Note 10 Pro than third-party models, including low latency in games, adaptive noise reduction and integration with MIUI.

FAQ: Answers to Frequent Questions