How to connect wireless headphones to Xiaomi Redmi Note: full instructions with solutions to problems

Wireless headphones have become an integral part of everyday life - they are convenient for listening to music, calls and podcasts without tangled wires. - Owners of Xiaomi Redmi Note smartphones (any model from the Note 7 to Note 13 Pro)+) We often face questions like how to pair headphones with a phone, why they don't connect the first time, or why the sound is interrupted. TWS-Headphones (including Xiaomi AirDots, Redmi Buds, Haylou and other brands) to smartphones of the Redmi Note line, as well as solve typical problems.

The connection process seems simple, but in practice, users face difficulties: the phone does not see the headphones, the sound is only in one earphone, or the connection is constantly broken. We will describe in detail every step from preparing the devices to setting up the sound profile, and give recommendations on choosing the optimal settings for stable operation. If you have already tried to connect the headphones and encountered an error, at the end of this article you will find a section with solutions to the most common problems.

1. Preparation of headphones and smartphone for connection

Before pairing devices, make sure that both gadgets are ready to work, which will save you unnecessary problems during the connection stage.

For headphones:

• 🔋 Charge your headphones and case (minimum to 30%).Discharged devices may not turn on or off during pairing.
• 📦 Take the headphones out of the case, they should automatically turn on. If this does not happen, press and hold the power button (usually 3-5 seconds) until the indicator blinks.
• 🔄 Make sure the headphones are in pairing mode. For most models, this is double-pressing the touchpad or holding the button until white/blue flashes (Xiaomi AirDots has red).+white-coloured).

For the Xiaomi Redmi Note smartphone:

• 📱 Turn on Bluetooth in the Quick Settings Panel (swipe down from the top edge of the screen) or through Settings → Connections and sharing → Bluetooth.

💡

If the headphones have previously connected to another phone, reset them: put both earphones in the case, then press and hold the button on the case for 10-15 seconds until the indicator flashes, which will return them to factory parameters.

2. Step-by-step connection instruction

Now, to the process of pairing, the instructions are universal for all Redmi Note models (including Note). 10/11/12/13) most TWS-headphone.

Step 1. Open the settings on your smartphone and select Connections and Sharing → Bluetooth. Activate the switch if it is turned off.

Step 2. On the headphones, activate the pairing mode (as described in the previous section). The indicator should flash white/blue (Redmi Buds 4 has alternate blinking on both headphones).

Step 3. The name of your headphones will appear on the list of available devices on your phone (e.g. Mi True Wireless Earphones or Redmi Buds 3 Lite).

Step 4: Confirm the connection if a request appears (sometimes you need to press OK or Connect) After a few seconds, the status will change to Connected.

Headphones flash white/blue|The name of the headphones appears in the Bluetooth list|The smartphone gives a notification "Connected"|The sound is played in both headphones.-->

If the headphones are connected but only sound is in one, reset (see section 5) or check the sound profile settings (section 4).

Xiaomi AirDots (any model)|Redmi Buds|Haylou|QCY|Others TWS-headphones|Wires with Bluetooth adapter-->

3. Customize the sound profile for optimal sound

After connecting the headphones, it is recommended to adjust the sound profile in the smartphone, which will improve the sound quality and reduce delays.

Go to Settings → Sound and Vibration → Sound Quality (on some Redmi Note models, the path may differ: Settings → Additional → Developer Settings → Bluetooth Audio Quality).

• 🎵 LDAC (For high-quality sound but high power consumption, not all headphones support.
• 🎧 AAC (The best balance of quality and stability is recommended for most people. TWS).
• 🔊 SBC (basic profile, suitable for old models of headphones).

For most Xiaomi Redmi Buds and AirDots, the AAC profile is optimal. If you notice audio delays (such as when watching videos), try switching to SBC.

Important: Xiaomi AirDots 3 Pro and Redmi Buds 4 Pro headphones support the LHDC protocol, which provides sound close to LDAC, but with less latency. To activate it, install the Mi Audio app from Google Play.

4. Solving Connection Problems

If your headphones don't connect or don't work properly, use these tips. We've collected some of the most common bugs and ways to fix them.

4.1 Phone can't see headphones

• 🔄 Reboot Bluetooth on your phone: Turn it off and turn it on again.
• 📱 Make sure the headphones are in pairing mode (the indicator flashes).
• 🚫 Check if the headphones are connected to another device (laptop, tablet.
• 🔧 Reset network settings on your phone: Settings → System system → Resetting settings → Reset your Wi-Fi, mobile network and Bluetooth settings.

4.2 The sound is only in one headphone.

• 🔄 Put both earbuds in the case, then pull out and plug in again.
• 🎧 Check the sound balance in the settings: Settings → Special facilities → Stereo sound balance (should be in the middle).
• 🔧 Reset the headphones to factory settings (see the instructions in Section 1).

Permanent breaks of connection

• 📶 Make sure there are no interference sources nearby (microwaves, other Bluetooth devices).
• 🔋 Charge your headphones and phone – low charge can cause instability.
• 📱 Update the phone firmware: Settings → The phone. → Updating the system.

💡

If the problem persists after all the manipulations, try connecting the headphones to another phone. If they work normally, the problem is with the settings of your Redmi Note. If not, the headphones themselves are faulty.

5. How to reset Xiaomi headphones to factory settings

If the headphones are glitchy or not connected, a complete reset often solves the problem.

For Xiaomi AirDots (1/2/3 generation) and Redmi Buds (3/4 series):

1. Put both headphones in the case and close the lid.
2. Open the lid and press the button on the case (usually located on the side) for 10-15 seconds.
3. The indicator on the case will start flashing red, then white - this is a signal to reset.

For Haylou GT1/GT2 and the like:

1. Get the headphones out of the case.
2. Press and hold the touchpads on both headphones simultaneously for 8-10 seconds until the lights start flashing red and white.

For QCY T1/T2:

1. Turn off the headphones (hold the power button for 5 seconds).
2. Turn them on again by holding the button for 15 seconds until you blink blue and red.

Once reset, the headphones will disappear from the list of conjugated devices on the phone, and they need to be reconnected, as described in section 2.

💡

If the headphones don't work after you reset, check them on another device, and maybe one of the headphones has run out of battery or hardware has broken down.

6. Optimization of headphones for different scenarios

Bluetooth and headphone settings can be finely tuned to specific tasks, such as listening to music, playing games or calling. Here are some recommendations.

6.1 For music and podcasts

• 🎵 Turn on the e.QUALIZER In a music player (e.g. Mi Music or Spotify), for bass, select "Bas Boost" for bass, for vocals, "Pop".

6.2 For games

• 🎮 Switch to profile. SBC — It minimizes delays.
• 📱 Enable Game Mode in Phone Settings (Settings) → Special facilities → Game mode).
• 🔋 Close the background applications to free up resources for a stable connection.

For calls

• 📞 In Bluetooth settings, select Voice Quality Priority (if you have such an option).
• 🎤 Check that the microphone is not silenced (some headphones have a separate button to turn on / off the microphone).
• 🔍 Use headphones indoors without noise – this will improve the quality of voice transmission.

For the Redmi Note 11 Pro+ and later, the dual audio feature is available (Settings → Connections → Dual audio).It allows you to simultaneously play sound on your headphones and phone speakers - convenient for watching videos with friends.

7. Frequent questions and answers

8. Additional tips for headphone care

To make headphones last longer, follow these recommendations:

• 🧼 Regularly clean the grids of speakers with a cotton swab (without alcohol!).
• 💧 Avoid getting moisture, even if the headphones have protection. IPX4/IPX5.
• 🔋 Store headphones in a case - this prevents battery discharge and mechanical damage.
• 🔥 Do not leave headphones in the sun or near heat sources (e.g. on a car torpedo).

If the headphones are no longer holding charge, try to "swing" the battery: completely discharge them, then charge to 100% without interruptions. Repeat the procedure 2-3 times.

💡

Average service life TWS-Headphones are 2-3 years old when used actively, and then the battery capacity is reduced by 30-50%, and the headphones require more frequent recharging.

⚠️ Warning: If the headphones stop working after falling or getting moisture, do not try to disassemble them yourself.

⚠️ WARNING: When buying Xiaomi headphones, check them for authenticity through the Mi Home app.Fakes often have pairing and sound issues, and can also be dangerous due to poor-quality batteries.