How to connect AUX to Xiaomi TV: all ways + error analysis

Connecting external acoustics through AUX-The 3.5mm connector to Xiaomi TV is a challenge many users face. TV redmi TV They often lack classical audio output, but that doesn't mean there are no outputs. In this article, we'll look at all the working methods, from adapters to digital interfaces, and also how to avoid typical audio tuning errors.

The main problem is that the manufacturer does not always provide analog output in new models. For example, Xiaomi Mi TV Q2 2023 has only HDMI ARC and optical output, and Redmi Smart Fire TV 2022 — all HDMI and USB. But even in such cases there are workarounds. Next — specific solutions for different scenarios.

Verification of availability AUX-jack on the Xiaomi TV

Before you buy cables, make sure your Xiaomi model supports analog audio output at all.

• 🔍 Inspect the back panel: look for a round connector with a diameter of 3.5 mm with the inscription AUDIO OUT Or headphone icons. On new models. TV P1 2026, Redmi Max 98" he usually doesn't exist.
• 📄 Check the specifications: on the Xiaomi website, in the product card, look for the "Interfaces" section. HDMI ARC or — AUX absent.
• 🛠️ Use the Mi Home app: in the Devices section, select your TV → "Specifications" → "Ports. All physical connectors are displayed there.

If AUX-There is a connector - you are lucky: it is enough to buy a standard cable "3.5 mm - 3.5 mm" (or "3.5 mm — RCA" If not, read more about adapters.

2. Connect via HDMI ARC (if no AUX)

Most Xiaomi TVs in recent years have been equipped with an HDMI ARC (Audio Return Channel) port that allows you to transmit sound from both sides: from the TV to the sound system (soundbar, receiver) and back.

1. Connect. HDMI-port HDMI ARC on the TV and the corresponding port on the soundbar / receiver.
2. Enable ARC in the TV settings: Settings → Sound → HDMI ARC → Enable
3. Select the HDMI ARC sound source on an external device (usually by the Source or Input button).

Important: Not all HDMI cables support ARC. You need a 1.4 or higher cable (the package must be marked "High Speed" or "ARC-compatible"). If there is no sound, try another cable.

💡

If after connecting the sound is delayed, in the settings of the TV (Settings → Sound → Sound Latency) reduce the value to 0 ms or 50 ms.

3. Use of optical output (TOSLINK)

If your Xiaomi TV has an optical output (a square-shaped connector with red light inside), you can connect external acoustics via a digital-to-analog converter (DAC), which gives a cleaner sound than AUX, but requires additional hardware.

You'll need:

• 🔌 Optical cable (TOSLINK)
• 🎧 DAC with optical input and AUX-output (e.g. FiiO) D3 topping D10s)
• 🔊 Columns or headphones with AUX-entrance

Connection diagram:

1. Connect the optical output of the TV with the input Optical In on the DAC.
2. Connect the speakers to the AUX Out output on the DAC.
3. In the TV settings, select optical output as the main sound source: Settings → Sound → Digital audio output → Enable

The optical output delivers lossless sound, but not all Xiaomi models support multi-channel sound (5.1).

4. Connection via Bluetooth (wireless AUX)

If wires aren't your option, you can transmit the audio over Bluetooth.

• 📱 Bluetooth transmitter with 3.5 mm input (e.g, 1Mii B06 Plus or Avantek. APTX-LL)
• 🔊 Bluetooth speakers/earphones (or a separate Bluetooth receiver for wired acoustics)

Instructions:

1. Connect the transmitter to an HDMI ARC or optical output of the TV (depending on the transmitter model).
2. Turn the transmitter into pairing mode (usually hold the power button for 3-5 seconds).
3. On your TV, activate Bluetooth: Settings → Connections → Bluetooth → Device Search Choose your transmitter from the list.

⚠️ Attention: Lip-sync is a common problem with Bluetooth connectivity to reduce it:

• Use transmitters with aptX Low Latency support.
• In the settings of the TV (Settings → Sound → Sound Lag), set the value of 100-150 ms.

5. Connect via USB (alternative to AUX)

Some Xiaomi TVs (e.g. Mi) TV 4S or Redmi X50) They allow you to make sound through USB-It's a port. USB-3.5 mm audio adapter.

Step-by-step:

1. Buy a USB Type-A → 3.5mm adapter (e.g. Sabrent AU-MMSA).
2. Connect the adapter to USB-television-port.
3. Connect the adapter to speakers/earphones through AUX-cable.
4. In the settings of the TV, select the sound source: Settings → Sound → Sound output → USB

⚠️ Attention: Not all USB-The ports on Xiaomi TVs support audio output:

• Try another one. USB-Port (usually only open to the public) USB 3.0, marked in blue).
• Check adapter compatibility: some models require additional power.

USB port on TV supports OTG| Adapter compatible with Android TV|Columns are on and volume is not at a minimum |The correct sound source is selected in the settings

-->

6. Problem Solving: No sound after connection

If you have everything connected, but there is no sound, check out these moments:

If the problem is not resolved:

• 🔄 Reboot the TV: Hold the power button on the remote for 10 seconds.
• 📋 Reset the sound settings: Settings → All settings → Reset → Reset the sound settings
• 📞 Contact Xiaomi for support: specify the TV model and the way to connect.

💡

If the sound disappears after the firmware update, try rolling back the software version through Settings → About TV → System Update → Recoil (not available on all models).

7.The Best Adapters and Cables to Connect AUX to Xiaomi TV

Choosing the right adapter is half the success, and here are the proven options for different scenarios:

• 🔌 HDMI ARC → AUX: GOgroove BlueHIVE ARC Adapter (supports Dolby Digital, delay) < 50 ms).
• 🎧 Optical → AUX: FiiO D3 (Supported DAC 24bit/96kHz, low-noise).
• 📶 Bluetooth transmitter: 1Mii B06 Plus (works with aptX) LL, range).
• 🔗 USB → AUX: Sabrent AU-MMSA (Android compatible TV, driverless).

When buying, pay attention to:

• Compatible with Android TV (not all adapters work with Xiaomi firmware).

FAQ: Frequent questions about connecting AUX to Xiaomi TV