Owners of popular TWS-Xiaomi headsets often face situations where devices stop responding correctly to commands or lose communication with the smartphone, in which cases a standard power outage does not help, and a more thorough recovery procedure is required. Understanding how to properly reboot a headphone system is a key skill for any user of modern electronics.
The reset process eliminates software errors, clears the pairing history, and restores synchronization between left and right channels. A soft reset or full reset to factory settings are the first steps you need to take before going to the service center. In this article, we will discuss in detail all the nuances of working with the Mi True Wireless Earbuds Basic model and its modifications.
It should be noted that the design of these headphones does not provide for the physical button to reset on the body of the cups themselves. All manipulations are carried out through the touch panels or using a charging case, which requires the user to follow the sequence of actions.
Signs of the need to restart the device
Before you start to act, you need to make sure that the problem really requires intervention in the software part of the gadget. Often users try to reset when it is enough to recharge the battery or reconnect Bluetooth. However, there are a number of symptoms that indicate the need for a forced restart.
One of the most obvious signs is the desynchronization of channels, when the sound is played in only one earphone, and the second is silent or emits static noise. Also an alarm is the inability to detect the device with the wireless module turned on. In some cases, the indicator lamp may burn constantly or flash in a non-standard color.
- 🔇 The sound is heard in only one headphone, the second channel is completely silent or works with a delay.
- 📱 The smartphone does not see headphones in the list of available Bluetooth devices, although previously there were no problems.
- ⚡ The indicator on the case or headphones burns continuously, not reacting to the opening of the lid or the extraction.
- 🔋 Charging does not start, although the contacts are clean and the cable is serviceable.
If you see any of these symptoms, it's likely that the internal headphone controller has got stuck or accumulated errors in the data buffer, and in this situation, simply rebooting through the phone's menu won't help, because the problem lies in the headset itself, requires physical exposure to touch panels or the use of a charging box.
⚠️ Warning: If the headphones get too hot during charging or use, let them cool to room temperature before performing any manipulations.
Preparation for performing resetting of settings
To successfully perform the recovery procedure, it is important to properly prepare the workplace and the devices themselves. Negligence at this stage often leads to the fact that the reset does not occur, and the user is forced to repeat the actions repeatedly.
The first step is to completely discharge or charge the devices, depending on the current situation. However, the most universal method is to place the headphones in the case to ensure that they are turned off. You also need to turn off Bluetooth on the smartphone to prevent automatic reconnection during the reset process.
☑️ Preparation for discharge
It is important to check the condition of the contact areas. They should not be dust, moisture or oxides that can prevent the correct reading of the status of the headphones with a case. Wipe the golden contacts with dry soft cloth or cotton swab if necessary.
| Status. | Action. | Indication |
|---|---|---|
| Headphones in the case | Cover's closed. | Case indicator is burning or flashing |
| Headphones off the case | Automatic onset | White indicator flashing |
| Interconnection mode | Waiting for connection | The indicator flashes fast. |
| Released | Ready for | The indicators flash at the same time |
After preparation, you can go directly to recovery methods. The choice of the specific method depends on the model of your headphones (Basic, Basic 2, Basic 2s) and the nature of the malfunction. Some methods are more gentle, others are radical.
Method One: Resetting through touch panels
The most common way to reboot Xiaomi Mi True Wireless Earbuds involves using touch controls on the cups themselves.This method is effective when the headphones are on but not working properly or refusing to mate. It does not require the devices to be removed from the case in the initial phase.
You need to remove both earbuds from the charger case. Wait for them to turn on (usually a white light light). Then simultaneously press and hold the touch zones on both headphones. Retention time can vary, but the standard value is 5-7 seconds.
💡
If you don't get it the first time, try changing the force of the press. The sensors respond to the touch, not the pressure, but sometimes you need a more confident finger contact.
In the process of holding, the indicators can flash several times, and your task is to wait for the indicators to go out or change the pattern of blinking, which will signal that they are turned off or reset, then place the headphones back in the case, close the lid and retrieve them for inspection.
If the procedure is successful, the headphones should automatically go to the device search mode (mode), which is signaled by frequent flashing of indicators, you can now open the Bluetooth settings on the phone, find the Mi True Wireless EBs Basic device and pair again.
Method Two: Using a Charging Case
For some modifications, especially the Basic 2s, there is an alternative method based on the logic of the charger case, which often helps when the touch controls on the headphones themselves are blocked or unresponsive, and the moment of retrieval of the devices plays a key role.
Put both headphones in the case and make sure they charge (the headphones are on red). Close the case cover and wait about 10 seconds. Then open the lid, but don't take the headphones out immediately. The indicator on the front of the case should catch fire.
The Secret to Long-Term Retention
Then you need to quickly remove both headphones at the same time, and if the synchronization is broken, one of them can start flashing and the other one does not. In this case, put them back, close the lid for 5 seconds and repeat the extraction procedure. Sometimes you need to perform this cycle 2-3 times.
⚠️ Warning: Do not try to forcibly pull the headphones out of the case. Remove them carefully, holding on to the bottom of the case, so as not to damage the charging contacts or the locking mechanism.
Profile removal and re-pairing
Once a hardware reset is done, it is critical that you reconnect correctly. Many users make the mistake of simply turning on Bluetooth, which leads to a conflict between old and new settings.
Go to your smartphone's Bluetooth settings. Find Mi True Wireless EBs Basic (or similar) on the list of previously paired devices. Click on the gear icon or information button next to the name and select Forget the device or Unpair.
Only after removing the old profile can you start searching. Open the case lid with headphones inside (or remove them if the instructions for your version require it).
- 📲 Turn off Bluetooth on your phone and turn it back on for list updates.
- 🔍 Click “Search for New Devices” in the Smartphone Menu.
- 🎧 Select Mi True Wireless EBs Basic from the list of found gadgets.
- ✅ Confirm pairing if a request appears on the phone screen.
Successful connection will be confirmed by the sound in the headphones and the appearance of the battery level on the smartphone screen (if the model supports this function).
Solution: If the reset did not help
There are times when even a full reset doesn't bring the headphones back to life, which can indicate deeper problems, such as discharging the case battery to a critical level or a software failure that requires a specific approach.
Check the charge of the case itself. If the indicator on the case does not light up when the cable is connected, the cable, power supply or Micro-USB/Type-C connector may have failed. Try using another cable and adapter with a current of at least 1A.
Also worth paying attention to is the cleanliness of the contacts. Oxidation can mimic the complete inoperability of the device. Use alcohol-containing liquid to clean the contacts, but only with the devices turned off and then thoroughly dry.
💡
If none of the methods worked, it is possible that the problem lies in the physical damage to the battery or control board, which requires the intervention of specialists.
In rare cases, deep discharge helps. Leave the headphones out of the case for a few days until they're completely discharged and no longer responsive. Then put them on charge for a few hours. This can restart the power controller.
Prevention of problems with TWS-headset
To avoid the need for frequent reboots and resets, it is recommended to adhere to simple operating rules. Xiaomi electronics are sensitive to storage and use conditions, and proper care will prolong the life of your Mi True Wireless Earbuds.
Always keep your headphones in a closed case when you're not using them, not only does it prevent loss, it also protects the contacts from oxidation and dust, and also, keep your batteries from running out for a long time.
Regularly update the firmware of the headphones if the manufacturer releases updates through the Mi Wear app or Xiaomi Earbuds. updates often contain fixes for communication errors and improvements in connection stability.